Benutzeranleitung / Produktwartung 7000 des Produzenten Dell
Zur Seite of 61
Inspiron 15 7000 Series Service Manual Computer Model: Inspiron 7548 Regulatory Model: P41F Regulatory Type: P41F001.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Contents Before Working Inside Your Computer................................... 7 Before You Begin .............................................................................................. 7 Safety Instructions ...................................
Removing the Memory Module(s).......................................... 20 Prerequisites .................................................................................................... 20 Procedure ................................................
Removing the Power-Status Light Board............................. 33 Prerequisites ..................................................................................................... 33 Procedure ....................................................
Removing the Speakers............................................................46 Prerequisites .................................................................................................... 46 Procedure .......................................
Before Working Inside Your Computer CAUTION: To avoid damaging the components and cards, handle them by their edges and avoid touching pins and contacts. NOTE: The images in this document may differ from your computer depending on the configuration you ordered.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/ regulatory_compliance. WARNING: Disconnect all power sources before opening the computer cover or panels.
• Philips screwdriver • Plastic scribe 9.
After Working Inside Your Computer CAUTION: Leaving stray or loose screws inside your computer may severely damage your computer. 1 Replace all screws and make sure that no stray screws remain inside your computer. 2 Connect any external devices, peripherals, and cables you removed before working on your computer.
Removing the Base Cover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
5 Lift the base cover off the computer. 1 screws (6) 2 base cover 3 captive screws (4) 4 plastic scribe 12.
Replacing the Base Cover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Removing the Battery WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
3 Disconnect the battery cable from the battery. 1 battery cable 2 battery 4 Turn the computer over, open the display, and press the power button for five seconds to ground the system board.
Replacing the Battery WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Removing the Hard Drive WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
2 Slide and lift the hard-drive assembly off the palm-rest assembly. 1 screws (4) 2 hard-drive assembly 3 Remove the screws that secure the hard-drive bracket to the hard-drive.
Replacing the Hard Drive WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Removing the Memory Module(s) WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
3 Remove the memory module from the memory-module slot. 1 securing clips (4) 2 memory-module slot (2) 3 memory modules (2) 21.
Replacing the Memory Module(s) WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
2 Slide the memory module firmly into the slot at a 45-degree angle and press the memory module down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and reinstall it. 1 memory modules (2) 2 securing clips (4) 3 memory-module slot (2) 4 notch 5 tab 3 Adhere the mylar tape over the memory modules.
Removing the Wireless Card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
3 Slide and remove the wireless card from the wireless-card slot. 1 wireless-card slot 2 wireless card 3 antenna cables 4 screw 25.
Replacing the Wireless Card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Removing the Coin-Cell Battery WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
2 Using a plastic scribe, pry the coin-cell battery out of the battery socket. 1 mylar tape 2 plastic scribe 3 coin-cell battery 28.
Replacing the Coin-Cell Battery WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Removing the Power-Adapter Port WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
2 Using a plastic scribe, pry the power-adapter port out of the socket on the palm-rest assembly. 1 power-adapter port 2 plastic scribe 3 power-adapter port cable 31.
Replacing the Power-Adapter Port WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Removing the Power-Status Light Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
3 Lift the power-light board off the palm-rest assembly. 1 screws (2) 2 latch 3 power-light board cable 4 power-light board 34.
Replacing the Power-Status Light Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Removing the Processor Fan WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
3 Lift the mylar tape and disconnect the processor-fan cable from the system board. 4 Remove the screws that secure the processor fan to the system board.
Replacing the Processor Fan WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Removing the Video-Card Fan WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
2 Note the antenna-cable routing and remove the antenna cables from the routing guides on the video-card fan. 1 video-card fan 2 wireless card 3 antenna cables 3 Disconnect the video-card fan cable from the system board. 4 Remove the screws that secure the video-card fan to the system board.
5 Lift the video-card fan off the system board. 1 screws (2) 2 video-card fan 3 video-card fan cable 41.
Replacing the Video-Card Fan WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Removing the Heat Sink WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Procedure 1 Peel off the mylar tape from the memory modules. 1 mylar tape 2 Loosen the captive screws that secure the heat sink to the system board. 3 Lift the heat sink off the system board.
Replacing the Heat Sink WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Removing the Speakers WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
2 Note the speaker-cable routing and lift the speakers, along with the speaker cable, off the palm-rest assembly. 1 speaker cable 2 left speaker 3 right speaker 47.
Replacing the Speakers WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Removing the Display Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
4 Note the display-cable routing and remove the display cable from the routing guides on the processor fan. 1 wireless card 2 antenna cables 3 display cable 5 Open the palm-rest assembly to an angle of 90 degrees. 6 Place the computer at the edge of a table with the display hanging over.
8 Lift the display assembly off the computer. 1 screws (6) 2 hinges (2) 3 display assembly 51.
Replacing the Display Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Removing the System Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Procedure 1 Disconnect the touch-pad cable, power-light cable, keyboard-backlight cable, keyboard cable, power-adapter port cable, speaker cable and battery cable from the system board.
3 Starting from the left, gently lift the system board off the palm-rest assembly. 1 screws (7) 2 system board 55.
Replacing the System Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Removing the Palm Rest and Keyboard WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
2 Lift the keyboard bracket off the palm-rest assembly. 1 screws (5) 2 keyboard bracket 3 Remove the screws that secure the keyboard to the palm-rest assembly.
4 Lift the keyboard off the palm-rest assembly. 1 screws (22) 2 keyboard 1 keyboard 2 palm-rest assembly 59.
Replacing the Palm Rest and Keyboard WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer . After working inside your computer, follow the instructions in After Working Inside Your Computer .
Flashing the BIOS You may need to flash (update) the BIOS when an update is available or when you replace the system board. To flash the BIOS: 1 Turn on the computer. 2 Go to dell.com/support . 3 If you have your computer's Service Tag, type your computer's Service Tag and click Submit .
Ein wichtiger Punkt beim Kauf des Geräts Dell 7000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell 7000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell 7000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell 7000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell 7000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell 7000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell 7000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell 7000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell 7000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
