Benutzeranleitung / Produktwartung 600 des Produzenten Dell
Zur Seite of 79
Dell XPS 600 Service Manual index.htm[4/10/2014 9:50:40 PM] Dell™ XPS™ 600 Service Manual Before You Begin Opening the Computer Cover Technical Specifications Advanced Troubleshooting System Setup.
Before You Begin: Dell XPS 600 Service Manual before0.htm[4/10/2014 9:50:44 PM] Back to Contents Page Before You Begin Dell™ XPS™ 600 Service Manual Getting Started Recommended Tools Turning Off Y.
Before You Begin: Dell XPS 600 Service Manual before0.htm[4/10/2014 9:50:44 PM] safety. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide . CAUTION: Handle components and cards with care.
Opening the Computer Cover: Dell XPS 600 Service Manual cvrop0.htm[4/10/2014 9:50:45 PM] Back to Contents Page Opening the Computer Cover Dell™ XPS™ 600 Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide .
Technical Specifications: Dell XPS 600 Service Manual specs0.htm[4/10/2014 9:50:45 PM] Back to Contents Page Technical Specifications Dell™ XPS™ 600 Service Manual Processor Processor type Intel®.
Technical Specifications: Dell XPS 600 Service Manual specs0.htm[4/10/2014 9:50:45 PM] Expansion Bus Bus type PCI 32-bit PCI Express x1 and x16 Bus speed Bus throughput PCI: 33 MHz PCI Express: 2.
Technical Specifications: Dell XPS 600 Service Manual specs0.htm[4/10/2014 9:50:45 PM] USB two front-panel, six back-panel, and two internal USB 2.0–compliant connectors System board connectors: IDE.
Technical Specifications: Dell XPS 600 Service Manual specs0.htm[4/10/2014 9:50:45 PM] Voltage (see the safety instructions located in the Product Information Guide for important voltage setting infor.
Advanced Troubleshooting: Dell XPS 600 Service Manual adtshoot.htm[4/10/2014 9:50:46 PM] Back to Contents Page Advanced Troubleshooting Dell™ XPS™ 600 Service Manual Power Lights Diagnostic Lights.
Advanced Troubleshooting: Dell XPS 600 Service Manual adtshoot.htm[4/10/2014 9:50:46 PM] Diagnostic Lights CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide .
Advanced Troubleshooting: Dell XPS 600 Service Manual adtshoot.htm[4/10/2014 9:50:46 PM] A possible expansion card failure has occurred. 1 . Determine if a conflict exists by removing a card (not a graphics card) and restarting the computer (see " Cards ").
Advanced Troubleshooting: Dell XPS 600 Service Manual adtshoot.htm[4/10/2014 9:50:46 PM] 3-3-1 NVRAM power loss 3-3-2 NVRAM configuration 3-4-1 Screen initialization failure 3-4-2 Screen retrace failu.
Advanced Troubleshooting: Dell XPS 600 Service Manual adtshoot.htm[4/10/2014 9:50:46 PM] Not Set Diskette Boot Failure Drive A or B is present but has failed the BIOS POST. Ensure that the drive is installed correctly in the computer and defined correctly in the system setup program.
System Setup Program: Dell XPS 600 Service Manual syssetup.htm[4/10/2014 9:50:48 PM] Back to Contents Page System Setup Program Dell™ XPS™ 600 Service Manual Overview Entering the System Setup Pro.
System Setup Program: Dell XPS 600 Service Manual syssetup.htm[4/10/2014 9:50:48 PM] Scroll up and down the list by using the up- and down-arrow keys. As an option is highlighted, the Option Field displays more information about that option and the option's current and available settings.
System Setup Program: Dell XPS 600 Service Manual syssetup.htm[4/10/2014 9:50:48 PM] Video This setting specifies which video controller is primary when two video controllers are present on the computer. Performance Hyper- Threading If your processor supports Hyper-Threading, this option appears in the Options List .
System Setup Program: Dell XPS 600 Service Manual syssetup.htm[4/10/2014 9:50:48 PM] Load Defaults This setting restores the computer's factory-installed default settings.
System Setup Program: Dell XPS 600 Service Manual syssetup.htm[4/10/2014 9:50:48 PM] The Boot Device Menu appears, listing all available boot devices. Each device has a number next to it. 4 . At the bottom of the menu, enter the number of the device that is to be used for the current boot only.
System Setup Program: Dell XPS 600 Service Manual syssetup.htm[4/10/2014 9:50:48 PM] 5 . After the Microsoft® Windows® desktop appears on your computer, shut down the computer . 6 . Turn off the monitor and disconnect it from the electrical outlet. 7 .
About Your XPS Computer: Dell XPS 600 Service Manual about0.htm[4/10/2014 9:50:49 PM] Back to Contents Page About Your XPS Computer Dell™ XPS™ 600 Service Manual Front View Front View (Door Open) Back View Front View 1 hard-drive activity light The hard-drive light is on when the computer reads data from or writes data to the hard drive.
About Your XPS Computer: Dell XPS 600 Service Manual about0.htm[4/10/2014 9:50:49 PM] 1 headphone connector Use the headphone connector to attach headphones and most kinds of speakers. 2 microphone connector Use the microphone connector to attach a personal computer microphone for voice or musical input into a sound or telephony program.
About Your XPS Computer: Dell XPS 600 Service Manual about0.htm[4/10/2014 9:50:49 PM] 1 processor fans (2) For optimal cooling, two processor fans are provided. Do not block the vents. 2 cover latch release To open the computer, lay the computer on its side with the cover latch release at the top and then push the latch to the left.
About Your XPS Computer: Dell XPS 600 Service Manual about0.htm[4/10/2014 9:50:49 PM] 1 mouse connector Plug a standard mouse into the green mouse connector. Turn off the computer and any attached devices before you connect a mouse to the computer. If you have a USB mouse, plug it into a USB connector.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] Back to Contents Page Removing and Installing Parts Dell™ XPS™ 600 Service Manual Memory Cards Drives Ha.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] If you install mixed pairs of PC2-4200 (DDR2 533-MHz) and PC2-5300 (DDR2 667-MHz) memory, the modules function at the speed of the slowest module installed.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 3 . Press out the securing clip at each end of the memory module connector. 1 memory connector closest to processor 2 securing clips (2) 3 connector 4 . Align the notch on the bottom of the module with the crossbar in the connector.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 6 . Close the computer cover. NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into your computer. 7 .
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] Three PCI card slots Two PCI Express x16 card slots (can be used in a dual-graphics configuration) NOTE: If .
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 graphics card bridge 2 power connectors (2) 3 dual-PCI Express graphics cards 3 . Disconnect the power cable connected to the card. 4 . Press the lever on the card retention arm and raise the retention arm.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 PCI Express x16 card 2 PCI Express x16 card slot 3 securing tab 6 . If you are replacing the card, see " Installing PCI Express Graphics Cards in a Dual Configuration .
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug the cable into the computer. 9 . Replace the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 5 . Prepare the card for installation. See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your computer.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 6 bracket caught outside of slot 8 . Before you lower the retention arm, ensure that: The tops of all cards and filler brackets are flush with the alignment bar.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 graphics card bridge 2 power connectors (2) 3 dual-PCI Express graphics cards 11. Replace the graphics card bridge, pressing firmly so that it completely covers the connector tabs.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 filler bracket 2 retention arm 3 lever 4 PCI card 5 edge connector 6 card connector 3 . Remove the card: a. If necessary, disconnect any cables connected to the card.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] The tops of all cards and filler brackets are flush with the alignment bar. The notch in the top of the card or filler bracket fits around the alignment guide.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 filler bracket 2 retention arm 3 lever 4 PCI card 5 edge connector 6 card connector 3 . If you are installing a new card, remove the filler bracket to create a card-slot opening.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] damage the system board. 6 . Gently pull the securing tab (if present) and place the card in the connector. Press down firmly and ensure that the card is fully seated in the slot.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 filler bracket 2 alignment guide 3 alignment bar 4 retention arm 9 . Connect any cables that should be attached to the card. See the documentation for the card for information about the card cable connections.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 2 . Connect the network cable to the add-in network adapter connectors. Do not connect the network cable to the integrated connector on the back panel. If you removed an add-in network connector: 1 .
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] Connect serial ATA hard drives to the SATA0 - SATA3 connectors on the system board.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] NOTE: If you are replacing a hard drive that contains data you want to keep, back up your files before you begin this procedure. 1 . Follow the procedures in " Before You Begin .
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 2 hard-drive cable 3 tab (2) 4 hard drive 5 system board connector 5 . Press in on the tabs on each side of the drive and slide the drive up and out. Installing a Hard Drive 1 .
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 power cable 2 hard-drive cable 3 tab (2) 4 hard drive 5 system board connector 5 . Connect a power cable to the drive. 6 . Connect the hard-drive cable to the drive and to the system board.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 11. Close the computer cover . NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into your computer. 12.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide . CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 7 . Connect a power cable to the drive. 8 . Connect the hard-drive cable to the drive and to the system board .
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 data cable 2 power cable 3 tabs (2) 4 floppy drive 4 . Press inward on the two tabs on the sides of the drive, slide the drive upward, and remove it from the floppy-drive bay.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 drive 2 bracket rails (2) 3 screws (4) 3 . Gently slide the drive into place until the tabs securely click into position. 1 data cable 2 power cable 3 tabs (2) 4 floppy drive 4 .
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 5 . Connect the other end of the data cable to the connector labeled "DSKT" on the system board . 6 . Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 internal USB cable 2 tabs (2) 3 media card reader* 4 FLEX connector 4 .
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 adapter rails (2) 2 screws (4) 5 . Slide the adapter into the 5.25-inch drive bay until the tabs on the rails securely click into position. 1 internal USB cable 2 tabs (2) 3 media card reader* 4 FLEX connector 6 .
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 7 . Connect the internal USB cable to the media card reader 8 . Route the USB cable through the cable routing clip. 9 . Connect the internal USB cable to the internal FLEX connector on the system board.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 power cable 2 tabs (2) 3 data cable 4 CD/DVD drive 3 . Press inward on the two tabs on the sides of the drive, and then slide the drive upward and remove it from the drive bay.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 drive 2 bracket rails (2) 3 screws (4) 4 . Gently slide the drive into place until the tabs securely click into position. 5 . Connect the power and data cables to the drive.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 2 tabs (2) 3 data cable 4 CD/DVD drive 6 . Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents. 7 . Close the computer cover .
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 anchor tabs (3) 2 shroud release levers (2) Installing the Processor Airflow Shroud 1 . Reconnect the cooling fan power cable to the FANREAR connector (see " System Board Components ") on the system board.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 . Follow the procedures in " Before You Begin ." 2 . Disconnect the two cooling fan power cables from the FANREAR and FANCPU connectors on the system board (see " System Board Components ").
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] b . On the retention base locate the tab opposite the power supply. Press on the retention base tab away from the heat sink until the heat sink pops up slightly.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] processor upgrade kit from Dell, reuse the original heat sink and blower when you install your new processor. 6 . Push down and out on the socket release lever.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 3 . Align the pin-1 corner of the processor and socket. 1 processor pin-1 indicator 2 release lever 3 processor 4 processor socket 5 socket pin-1 indicator NOTICE: Socket pins are delicate.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] NOTICE: Ensure that the heat sink is correctly seated and secure. 8 . Reinstall the retention module clips. 9 . Lower the airflow shroud over the heat sink. 10.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 2 . Open the computer cover. 3 . Remove any components that restrict access to the system board.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] replacement system board. NOTE: Jumper settings on replacement system boards are preset by the factory.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] NOTICE: To avoid damaging the cables when you reinstall the power supply, replace the cables as shown below.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 4 . Close the computer cover halfway and pull the front panel away from the computer.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 LED cable 2 front LED board guides 3 light pipe 4 screw 5 front LED board guide To replace the front LED board, perform the removal procedure in reverse.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 2 . Unsnap the top bracket hinge and pull the top of the drive door outward, away from the computer.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 top bracket hinge 2 bottom bracket hinge 3 . Lift the bottom bracket hinge away from the computer. Replacing the Drive Door To prevent damage to your computer, the drive door is designed to "break away" from the computer if it is opened too far.
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] 1 door 2 door bracket/door hinge assembly 3 lower part of the door hinge 3 .
Removing and Installing Parts: Dell XPS 600 Service Manual parts0.htm[4/10/2014 9:50:52 PM] system board. 4 . Remove the battery by prying it out of its socket with your fingers. 5 . Insert the new battery (CR2032) into the socket with the side labeled "+" against the metal clip, and press the battery into place.
Closing the Computer Cover: Dell XPS 600 Service Manual mdcvrcls.htm[4/10/2014 9:50:57 PM] Back to Contents Page Closing the Computer Cover Dell™ XPS™ 600 Service Manual 1 . Ensure that all cables are connected, and fold cables out of the way. 2 .
Closing the Computer Cover: Dell XPS 600 Service Manual mdcvrcls.htm[4/10/2014 9:50:57 PM].
Technical Overview: Dell XPS 600 Service Manual techov0.htm[4/10/2014 9:50:58 PM] Back to Contents Page Technical Overview Dell™ XPS™ 600 Service Manual Inside View of Your Computer System Board C.
Technical Overview: Dell XPS 600 Service Manual techov0.htm[4/10/2014 9:50:58 PM] 1 CPU fan connectors (2) 10 optical drive connector (IDE) 19 card fan connector (FAN SYS) 2 power connector (POWER12V).
Technical Overview: Dell XPS 600 Service Manual techov0.htm[4/10/2014 9:50:58 PM] DC Power Connector P1 Pin Number Signal name Color Wire Gauge 1 +3.3 VDC Orange 16-AWG 2 +3.
Technical Overview: Dell XPS 600 Service Manual techov0.htm[4/10/2014 9:50:58 PM] 19 COM Black 18-AWG 20 N/C N/C N/A 21 +5 VDC Red 18-AWG 22 +5 VDC Red 18-AWG 23 +5 VDC/SE Red 18-AWG 24 COM Black 18-A.
Technical Overview: Dell XPS 600 Service Manual techov0.htm[4/10/2014 9:50:58 PM] 5 COM Black 6 COM Black DC Power Connector P4 Pin Number Signal Name 18-AWG Wire Color 1 +12 VBDC White 2 +12 VBDC Whi.
Technical Overview: Dell XPS 600 Service Manual techov0.htm[4/10/2014 9:50:58 PM] 1 +3.3 VDC Orange 2 COM Black 3 +5 VDC Red 4 COM Black 5 +12 VCDC White DC Power Connectors BAY1 and BAY2 Pin Number S.
Ein wichtiger Punkt beim Kauf des Geräts Dell 600 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell 600 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell 600 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell 600 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell 600 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell 600 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell 600 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell 600. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell 600 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
