Benutzeranleitung / Produktwartung 1100 des Produzenten Dell
Zur Seite of 116
www .dell.com | support.dell.com Dell™ Dimension™ 1100/B110 Owner’ s Manual Model DMC keyboard connector mouse connector USB 2.0 connectors (4) microphone connector* line-in connector* line-out .
Notes, Notices, and Cautions NOTE: A NOTE indicates important i nformation that helps you make better use of your computer . NOTICE: A NOTICE indicates either potential da mage to hardware or loss of da ta and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for propert y damage, personal injury , or death.
Contents 3 Contents Finding Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1 Setting Up and Using Y our Computer Setting Up a Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Printer Cable . . . .
4 Contents Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 IEEE 1394 Device Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Keyboard Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 5 Restoring Y our Operating Sy stem . . . . . . . . . . . . . . . . . . . . . . . . 41 Using Microsoft Windows XP Sy stem Restore . . . . . . . . . . . . . . . 42 Using Dell PC Restore by Symantec . . . . . . . . . . . . . . . . . . . . 43 Using the Operating Sy stem CD .
6 Contents Floppy Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Removing a Floppy Drive . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Installing a Floppy Drive . . . . . . . . . . . . . . . . . . . . . . . . .
Finding Information 7 Finding Information NOTE: Some features or media ma y be optional and may not ship with your computer . Some features or media may not be available in certain countries. NOTE: Additional information may ship with your computer . What Are Y ou Looking For? Find It Here • W arranty information • T erms and Conditions (U.
8 Finding Information • Service T ag and Expr ess Service Code • Microsoft W indows License Label Service T ag and Microsoft ® Windows ® License These labels are located on your computer . • Use the Service T ag to identify your computer when you use support.
Setting Up and Using Y our Computer 9 Setting Up and Using Y our Computer Setting Up a Printer NOTICE: Complete the operating sy stem setup before yo u connect a printer to the computer . See the documentation that came with the pr inter for setup information, including how to : • Obtain and install updated drivers.
10 Setting Up and Using Y our Computer 3 Attach the USB printer cable to the USB connectors on the computer and the printer . The USB connectors fit only one way . Connecting a Parallel Printer 1 Complete the operating system setup, if you have not already done so .
Setting Up and Using Y our Computer 11 4 T urn on the printer and then turn on the computer . If the Add New Hardware Wizard window appears, click Cancel . 5 Install the printer driver if necessary . See th e documentation that came with your printer .
12 Setting Up and Using Y our Computer Network Setup Wizard The Microsoft ® W indows ® XP operating system provides a Networ k Setup W izard to guide you through the process of sharing files, printers, or an Internet connection between computers in a home or small office.
Setting Up and Using Y our Computer 13 If you are using a dial-up connection, connect a teleph one line to the modem connector on your computer and to the telephone wall jack before you set up your Internet connection. If you ar e using a DSL or cable modem connection, contact your ISP for setup instructions.
14 Setting Up and Using Y our Computer Playing CDs and DVDs NOTICE: Do not press down on the CD or DVD tray when you op en or close it. Keep the tray closed when you are not using the drive. NOTICE: Do not move the co mputer when you are playing CDs or DVDs.
Setting Up and Using Y our Computer 15 A D VD player includes the following basic buttons: F or more information on playing CDs or D VDs, click Help on the CD or D VD player (if available). Adjusting the V olume NOTE: When the speakers are mu ted, you do not hear the CD or DVD playing.
16 Setting Up and Using Y our Computer Adjusting the Picture If an error message notifies you that the current r eso lution and color depth are using too much memory and preventing D VD playback, adjust the display properties: 1 Click the Start button and click Control P anel .
Setting Up and Using Y our Computer 17 • If you have two CD or DVD drives , select the drive into which you ha ve inserted your source CD or D VD and click the Disc Copy button. The computer copies the data from the source CD or D VD to the blank CD or D VD.
18 Setting Up and Using Y our Computer Helpful T ips • Use Microsoft ® W indows ® Explorer to drag and drop files to a CD-R or CD-R W only after you start Sonic DigitalMedia and open a DigitalMedia project. • Use CD-Rs to burn music CDs that you want to pl ay in r egular stereos.
Solving Problems 19 Solving Problems T roubleshooting T ips F ollow these tips when you troubleshoot your computer: • If you added or removed a part befor e the proble m started, review the installation procedures and ensure that the part is corr ectly installed.
20 Solving Problems CD and DVD drive problems NOTE: High-speed CD or DVD drive vibrat ion is normal and may cause noise, wh ich does not indicate a defect in the drive or the CD or DVD. NOTE: Because of different regions worldwide and different disc formats, not all DVD titles work in all DVD drives.
Solving Problems 21 Hard drive problems E-Mail, Modem, and Internet Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . NOTE: Connect the modem to an anal og telephone jack only .
22 Solving Problems Error Messages CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . If the message is not listed, see the documentation for the operating system or the program that was running when the message appeared.
Solving Problems 23 IEEE 1394 Device Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . drive letter : IS NOT ACCESSIBLE . T HE DEVICE IS NOT READY — The drive cannot read the disk.
24 Solving Problems Keyboard Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
Solving Problems 25 A program stops responding A program crashes repeatedly NOTE: Software usually includes installation instructions in its documentation or on a floppy disk or CD.
26 Solving Problems Other software problems Memory Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
Solving Problems 27 Mouse Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . I F YOU EXPERIENCE OTHER MEMORY PROBLEMS — • Reseat the memory modules (see page 55) to ensure that your computer is su ccessfully communicating with the memory .
28 Solving Problems Network Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . Power Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
Solving Problems 29 Printer Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . NOTE: If you need technical assistan ce for your printer , contact the printer’ s manufacturer .
30 Solving Problems Scanner Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . NOTE: If you need technical assistan ce for your scan ner , contact the scanner’ s manufacturer .
Solving Problems 31 Sound and Speaker Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . No sound from speakers NOTE: The volume control in some MP3 pl ayers overrides the Windows volume setting.
32 Solving Problems No sound from headphones V ideo and Monitor Problems CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide . NOTE: See the monitor documentation for troubleshooting procedures.
Solving Problems 33 If the screen is difficult to read C HECK THE DIAGNOSTIC LIGHTS — See page 35 . R UN THE D ELL D IAGNOSTICS — See page 38. C HECK THE MONITOR SETTINGS — See the monitor documentation for instructions on adjusting the contrast and brightness, demagnetizing (degaussing) the monitor , and running the monitor self-test.
34 Solving Problems.
Advanced T roubleshooting 35 Advanced T roubleshooting Diagnostic Lights CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide .
36 Advanced T roubleshooting A possible graphics card failur e has occurred. • If the computer has a graphics card, remove the car d, reinstall it (see page 58), and then restart the computer . • If the problem still exists, install a graphics card that you know works and restart the computer .
Advanced T roubleshooting 37 A possible expansion car d failure has occurred. 1 Determine if a conflict exists by removing a car d (not a graphics card) and restarting the computer (see page 58). 2 If the problem persists, reinstall the card that you r emoved, remove a different car d, and then restart the computer .
38 Advanced T roubleshooting Dell Diagnostics CAUTION: Before you begin any of the proced ures in this section , follow the safety inst ructions located in the Product Information Guide .
Advanced T roubleshooting 39 2 If a problem is encountered during a test, a message a ppears with an error code and a description of the problem. W rite down the error code and problem description and follow the instructions on the screen. If you cannot resolve the error co ndition, contact Dell (see page 94).
40 Advanced T roubleshooting Drivers What Is a Driver? A driver is a program that controls a device such as a printer , mouse, or keyboar d. All devices requir e a driver program. A driver acts like a translator betw een the device and any other programs that use the device.
Advanced T roubleshooting 41 Using Windows XP Device Driver Rollback If a problem occurs on your computer after you install or update a dr iver , use W indows XP Device Driver Rollback to replace the driver with the pr eviously installed version. 1 Click the Start button and click Control P anel .
42 Advanced T roubleshooting • Dell PC Restore by Symantec r estores your har d drive to the operating state it was in when you purchased the computer . Dell PC Restore permanentl y deletes all data on th e har d drive and removes any applications installed after you received the co mputer .
Advanced T roubleshooting 43 5 Click Next . The Restoration Complete screen appears after System Restor e f inishes collecting data and then the computer restarts. 6 After the computer restarts, click OK . T o change the restor e point, you can either repeat t he steps using a differ ent restor e point, or you can undo the restoration.
44 Advanced T roubleshooting T o use PC Restore: 1 T urn on the computer . During the boot process, a blue bar with www .dell.com appears at the top of the screen.
Advanced T roubleshooting 45 NOTE: If the partition for PC Restore d oes not exist on your computer’ s hard drive, a message appears stating that the partitio n was not found. Click Quit ; there is no pa rtition to delete. 4 Click OK to remove the PC Restor e partition on the hard drive.
46 Advanced T roubleshooting 4 P ress <F12> immediately after the DELL™ logo appears. If the operating system logo appears, wait until yo u see the W indows desktop, and then shut down the computer and try again. F ollow the instructions on the screen to complete the installation.
Removing and Installing Parts 47 Removing and Installing Parts Before Y ou Begin This chapter provides procedures for r emoving and in stalling the components in your computer .
48 Removing and Installing Parts Before W orking Inside Y our Computer Use the following safety guidelines to help protect your computer from potential damage and to help ensure your own personal safety . CAUTION: Before you begin any of the proce dures in this section, follow th e safety instructions located in the Product Information Guide .
Removing and Installing Parts 49 Front and Back V iew of the Computer Front View 1 2 9 3 4 8 6 5 10 7 1 CD or D VD drive- activity light The drive activity light is on when the computer reads data from the CD or D VD drive. 2 CD or D VD drive eject button P ress to eject a disc from the CD or DVD drive.
50 Removing and Installing Parts Back View 8 power light The power light illuminates and blinks or remains solid to indicate differ ent states: • No light — The computer is turned off. • Steady gr een — The computer is in a normal operating state.
Removing and Installing Parts 51 4 line-in connector Use the blue line-in connector to a ttach a recor d/playback device such as a cassette player , CD player , or VCR.
52 Removing and Installing Parts Removing the Computer Cover CAUTION: Before you begin any of the proc edures in this section , follow the safety inst ructions located in the Product Information Guide . CAUTION: T o guard against electr ical shock, alway s unplug your computer from th e electrical outlet before opening the cover .
Removing and Installing Parts 53 Inside V iew of Y our Computer CAUTION: Before you begin any of the proce dures in this section, see the safety instructions located in the Product Information Guide . CAUTION: T o guard against electrical shock, alway s unplug your computer from the electrical outlet before opening the computer cover .
54 Removing and Installing Parts Sy stem Board Components memory module connectors (DDR3, DDR4) main power connector (J3J1) processor and heat sink connector (J2E1) fan connector CPU F AN) (J1F1) proc.
Removing and Installing Parts 55 Memory Y ou can incr ease your computer memory by insta lling memory modules on the system board. F or information on the type of memory supported by your computer , see "Memory" on page 79. NOTE: DDR 333 memory operates at 320 MHz when used wi th an 800-MHz front-side bus.
56 Removing and Installing Parts NOTICE: If you remove your original memory modules from the computer during a me mory upgrade, keep them separate from any new modules that you may have, even if you purchased the new mo dules from Dell. Y ou should install your new memory modules in connectors DIMM3 and DIMM4.
Removing and Installing Parts 57 8 T o insert a module, pr ess out the securing clip at each end of the memory module connector . 9 Align the notch on the bottom of the mo dule with the crossbar in the connector . NOTICE: T o avoid breaking the memory module, do not press near the midd le of the module.
58 Removing and Installing Parts 11 Replace the computer cover (see page 78). NOTICE: T o connect a network cable, firs t plug the cable into the network wall jack and then plug it into the computer . 12 Connect your computer and devices to elec trical outlets, and then turn them on.
Removing and Installing Parts 59 CAUTION: Some network adapters automatically start the computer when they are connected to a network. T o guard against electrical sh ock, be sure to unplug your computer from its electrical outlet before installing any cards.
60 Removing and Installing Parts 4 Secure the car d bracket with the scr ew you removed in step 2. 5 Connect any cables that should be attached to the card. See the documentation for the card for infor mation about the car d’s cable connections. NOTICE: Do not route card cables ov er or behind the cards.
Removing and Installing Parts 61 3 Remove the securing screw from the car d bracket. 4 Grasp the card by its top corners, and ease it out of its connector . 5 If you are r emoving the card permanently , install a filler brack et in the empty card-slot opening.
62 Removing and Installing Parts Removing the Front Panel 1 F ollow the procedures in "Befor e Y ou Begin" on page 47. 2 Remove the computer cover (see page 52). 3 Release and remove the front panel: a If your computer has a release lever , push the r elease lever to release the top tab.
Removing and Installing Parts 63 Removing the Front-Panel Insert 1 P ress in the two insert tabs. 2 P u sh out the front-panel insert. insert tabs (2).
64 Removing and Installing Parts Reattaching the Front Panel 1 Reattach the front panel to the side hinges. 2 Rotate the front panel until it snaps onto the front of the computer .
Removing and Installing Parts 65 General Installation Guidelines Connect the IDE hard drive to the system boar d conne ctor labeled PRI IDE. Connect CD/DVD drives to the connector labeled J6J1.
66 Removing and Installing Parts Hard Drive CAUTION: Before you begin any of the proc edures in this section , follow the safety inst ructions located in the Product Information Guide . CAUTION: T o guard against electr ical shock, alway s unplug your computer from th e electrical outlet before opening the cover .
Removing and Installing Parts 67 3 If you are r eplacing the hard drive, r emove the drive from the bracket: a Remove the hard drive-securing scr ews. b Remove the hard drive from the brack et.
68 Removing and Installing Parts Installing a Hard Drive 1 Unpack the replacement har d drive, and prepare it for installation. 2 Check the documentation for the drive to verify that it is configured for your computer . 3 Remove the hard drive brack et (see page 66).
Removing and Installing Parts 69 6 Connect a power cable to the drive. 7 Connect the data cable to the drive and to the system board (see page 54). 8 Close the computer cover (see page 78). NOTICE: T o connect a network cable, firs t plug the cable into the network wall jack and then plug it into the computer .
70 Removing and Installing Parts Floppy Drive CAUTION: Before you begin any of the proc edures in this section , follow the safety inst ructions located in the Product Information Guide . CAUTION: T o guard against electr ical shock, alway s unplug your computer from th e electrical outlet before opening the cover .
Removing and Installing Parts 71 2 Remove the floppy drive br acket from the computer : a Remove the bracket-securing scr ew for the floppy drive. b Remove the bracket for the flop py drive from the computer . 3 Remove the floppy dr ive from the brack et: a Remove all four drive-securing screws (two on each side).
72 Removing and Installing Parts 5 Secure the floppy drive brack et with the to p bracket screw that came with your drive. 6 Reattach the front panel (see page 64). 7 Connect the data cable to the back of the drive and to the floppy drive connector on the system board (see page 54).
Removing and Installing Parts 73 CD/DVD Drive CAUTION: Before you begin any of the proc edures in this section , follow the safety inst ructions located in the Product Information Guide . CAUTION: T o guard against electr ical shock, alway s unplug your computer from th e electrical outlet before opening the cover .
74 Removing and Installing Parts Installing a CD/DVD Drive 1 If you are installing a new drive, unpack the drive and pr epare it for installation. Check the documentation that accompanied the drive to verify that the drive is configured for your computer .
Removing and Installing Parts 75 11 Connect your computer and devices to thei r electrical outlets, and turn them on. See the documentation that came with the drive for instructions on installing any software r equired for drive operation. 12 Enter system setup (see page 82) and select the appropriate Drive option.
76 Removing and Installing Parts 4 After the drive is in place, apply pressur e to ensure that the drive is fully seated. 5 Use the securing screw that came with the dr ive to attach the drive to the computer . NOTICE: Match the colored strip on the c able with pin 1 on the drive (pin 1 is mark ed as "1").
Removing and Installing Parts 77 8 Reattach the front panel (see page 64). 9 Replace the computer cover (see page 78). NOTICE: T o connect a network cable, first pl ug the cable into the network wall jack and then plug it into the computer . 10 Connect your computer and devices to elec trical outlets, and then turn them on.
78 Removing and Installing Parts 6 Replace the computer cover (see page 78). NOTICE: T o connect a network cable, first plug the cable into th e network device and then plug it into the computer . 7 Connect your computer and devices to el ectrical outlets, and turn them on.
Appendix 79 Appendix Specifications Processor P rocessor type Intel ® Pe n t i u m ® 4 with HT T echnology and Intel Celeron ® NOTE: Not all Pentium 4 processors support Hyper -Threading technology .
80 Appendix NIC integrated network interface ca pable of 10/100 communication. System Clock Intel P entium 4: 800 MHz Intel Celeron: 533 MHz Vide o T ype Integrated Intel Extreme Graphics 2 Audio T ype AC97, Sound Blaster Emulation, ADI 1980 audio controller with 2.
Appendix 81 PS/2 (keyboar d and mouse) 6-pin mini-DIN USB two front-panel and four back-panel USB 2.0–compliant connectors Aud io Three connectors for line-in, line-out, and microphone; one front- p.
82 Appendix Sy stem Setup Overview Use system setup as follows: • T o change the system configuration information after yo u add, change, or r emove any hardware in your computer • T o set or chan.
Appendix 83 NOTICE: Unless you are an expert computer user , do not ch ange the settings for this pr ogram. Certain changes can make your computer work incorrectly . Entering Sy stem Setup 1 T urn on (or restart) your computer . 2 When the blue DELL™ logo appe ars, press <F2> immediately .
84 Appendix Sy stem Setup Options NOTE: Depending on your comp uter and installed devices, th e items listed in this secti on may not appear , or may not appear exactly as listed.
Appendix 85 Boot Sequence Lists the drives in the order by which they boot. • Floppy device - Identifies and defines the floppy drive attached to the FLOPPY connector on the system board. If ther e is no installed drive, it appears as Floppy device (not installed) .
86 Appendix Integrated Devices Sound Enables or disables the onboard audio controller Network Interface Controller Y ou can set the NIC to On (default), Off , or On w/ PXE . When the On w/ PXE setting is active (available only for the future boot process), the computer prompts the user to press <Ctrl><Alt><b>.
Appendix 87 System Security This section displays available system security options. Password Status This option locks the system passwor d field with the setup passwor d. When the field is locked, the option to disable passwor d security by pressing <Ctrl><Enter> when the computer starts is no longer available.
88 Appendix Boot Sequence This feature allows you to change the boot sequence for devices. Option Settings • Diskette Drive — The computer attempts to boot from the flo ppy drive.
Appendix 89 3 When F2 = Setup, F12 = Boot Menu appears in the upper -right corner of the screen, press <F12>. If you wait too long and the operating system lo go appears, continue to wait until you see the Microsoft W indows desktop. Then shut down your computer (see page 47) and try again.
90 Appendix Clearing Forgotten Passwords CAUTION: Before you begin any of the proc edures in this section , follow the safety inst ructions located in the Product Information Guide . 1 F ollow the procedures in "Befor e Y ou Begin" on page 47.
Appendix 91 NOTICE: T o connect a network cable, firs t plug the cable into the network wall jack and then plug it into the computer . 11 Connect your computer and devices to el ectrical outlets, and turn them on.
92 Appendix Clean your floppy drive using a commercially availabl e cleaning kit. These kits contain pretr eated floppy disks to remove contaminants that accumulate during normal operation. CDs and DVDs NOTICE: Alway s use compressed air to clean the lens in the CD/DVD drive, and follow th e instructions that come with the compressed air .
Appendix 93 Definition of "Third-Party" Software and Peripherals Third-party softwar e and peripherals include any periphera l, accessory , or software program sold by Dell not under the Dell brand (printers, scanners, cameras, games, and so on).
94 Appendix particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to corr ect the interference by one or mor e of the following measures: • Reorient or r elocate the receiving antenna.
Appendix 95 Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and T oll-Free Numbers Anguilla Gener.
96 Appendix Austria (V ienna) International Access Code: 900 Country Code: 43 City Code: 1 W ebsite: support.euro.dell.com E-mail: tech_support_central_europe@dell.
Appendix 97 Canada (North Y ork, Ontario) International Access Code: 011 Online Order Status: www .dell.ca/ostatus AutoT ech (automated technical support) toll-free: 1-800-247-9362 Customer Care (Home Sales/Small Business) toll-free: 1-800-847-4096 Customer Care (med.
98 Appendix China (Xiamen) Country Code: 86 City Code: 592 T echnical Support website: support.dell.com.cn T echnical Support E-mail: cn_support@dell.com T echnical Support F ax 818 1350 T echnical Su.
Appendix 99 Czech Republic (P rague) International Access Code: 00 Country Code: 420 City Code: 2 W ebsite: support.euro.dell.com E-mail: czech_dell@dell.
100 Appendix F inland (Helsinki) International Access Code: 990 Country Code: 358 City Code: 9 W ebsite: support.euro.dell.com E-mail: fin_support@dell.
Appendix 101 Germany (Langen) International Access Code: 00 Country Code: 49 City Code: 6103 W ebsite: support.euro.dell.com E-mail: tech_support_central_europe@dell.
102 Appendix Hong Kong International Access Code: 001 Country Code: 852 W ebsite: support.ap.dell.com E-mail: apsupport@dell.com T echnical Support (Dimension™ and Inspiron™) 2969 3188 T echnical .
Appendix 103 Italy (Milan) International Access Code: 00 Country Code: 39 City Code: 02 W ebsite: support.euro.dell.com E-mail: support.euro .dell.com/it/it/emaildell/ Home and Small Business T echnic.
104 Appendix Japan (Kawasaki) International Access Code: 001 Country Code: 81 City Code: 44 W ebsite: support.jp.dell.com T echnical Support (servers) toll-free: 0120-198-498 T echnical Support outsid.
Appendix 105 Latin America Customer T echnical Support (A ustin, T exas, U.S.A.) 512 728-4093 Customer Service (Austin, T e xas, U.S.A.) 512 728-3619 F ax (T echnical Support and Customer Service) (Austin, T e xas, U.S.A.) 512 728-3883 Sales (Austin, T e xas, U.
106 Appendix Mexico International Access Code: 00 Country Code: 52 Customer T echnical Support 001-877-384-8979 or 001-877-269-3383 Sales 50-81-8800 or 01-800-888-3355 Customer Service 001-877-384-897.
Appendix 107 Norway (L ysaker) International Access Code: 00 Country Code: 47 W ebsite: support.euro.dell.com E-mail Support (portable computers): nor_nbk_support@dell.com E-mail Support (desktop computers): nor_support@dell.com E-mail Support (servers): nordic_server_support@dell.
108 Appendix St. Lucia General Support 1-800-882-1521 St. V incent and the Grenadines General Support toll-free: 1-877-270-4609 Singapore (Singapore) International Access Code: 005 Country Code: 65 T .
Appendix 109 Sweden (Upplands V asby) International Access Code: 00 Country Code: 46 City Code: 8 W ebsite: support.euro.dell.com E-mail: swe_support@dell.com E-mail Support for Latitude and Inspiron: Swe-nbk_kats@dell.com E-mail Support for OptiPlex: Swe_kats@dell.
110 Appendix T rinidad/T obago General Support 1-800-805-8035 T urks and Caicos Islands General Support toll-free: 1-866-540-3355 U.K. (Bracknell) International Access Code: 00 Country Code: 44 City Code: 1344 W ebsite: support.euro.dell.com Customer Care website: support.
Appendix 111 U.S.A. (Austin, T exas) International Access Code: 011 Country Code: 1 Automated Or der-Status Service toll-free: 1-800-433-9014 AutoT ech (portable and desktop computers) toll-free: 1-80.
112 Appendix.
Index 113 Index A audio . See sound B battery problems, 1 9 replacing, 7 7 BIOS, 82 boot sequence, 88 changing, 8 8 - 8 9 option settings, 8 8 booting to a USB device, 8 8 C car ds installing PCI, 5 8.
114 Index 114 Index drives hard drive, 6 6 installing CD/D VD, 7 4 installing floppy , 7 1 installing hard drive, 6 8 problems, 1 9 removing CD/D VD, 7 3 removing floppy , 7 0 rem o vi n g h ard d ri .
Index 115 modem connector , 5 1 problems, 2 1 monitor blank, 3 2 hard to r ead, 3 3 problems, 3 2 motherboard. See system board mouse connector , 5 0 problems, 2 7 N network connector , 5 1 Network Se.
116 Index 116 Index Service T ag, 8, 50 settings system setup, 8 2 software Hyper - Thr eading, 1 8 p r o b l e m s , 25-26 sound problems, 3 1 volume, 3 1 sound connectors line-in, 5 1 line-out, 5 1 .
Ein wichtiger Punkt beim Kauf des Geräts Dell 1100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell 1100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell 1100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell 1100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell 1100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell 1100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell 1100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell 1100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell 1100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
