Benutzeranleitung / Produktwartung 1400I des Produzenten Datalogic Scanning
Zur Seite of 180
Magellan ® 1400i Omni-Directional Imaging Scanner Product Reference Guide.
Datalogic Scanning, Inc. 959 T err y Street Eugene, Oregon 97402 T elephone: (541) 683-5700 F ax: (541) 345-7140 An Unpublished W ork - All r ights reser v ed.
Product Reference Guide i Table of Contents About This Manual ............................................................................................................. .. 1-1 Manual Conventions .....................................................
ii Magellan ® 1400i Minimum Reads ............................................................................................................. 5-7 GTIN .................................................................................................
Product Reference Guide iii Interleaved 2 of 5 Length 1, Length 2 Programming Instructions .........................................5-43 Interleaved 2 of 5 Stitching .....................................................................................
iv Magellan ® 1400i Keyboard Wedge ............................................................................................................ B-2 Standard Feature Defaults ............................................................................
Product Reference Guide 1-1 Chapter 1 Getting Started The Magellan ® 1400i Omni-D irectional Imaging Scanner offers hands-free scanning for small, easily handled items and handheld scanning for bulkier items. I ts aggressive imaging perfor- mance and intuitive operation reduces user training and speeds checkout for better customer service.
Getting Started 1-2 Magellan ® 1400i Connecting the Scanner The scanner kit you order ed to match your interface should provide a compatible cable for your installation. U se the appropriate instructions below to connect the scanner to the terminal, PC or other host device.
Programming Product Reference Guide 1-3 Wand Emulation Connection — Connect the scanner to the appropriate port on the termi- nal/PC via a decoder 1 using the correct cable for the interface type you or dered. Reference Figure 2 . IBM Connection — Connect the scanner to the IBM port on the terminal/PC using the cor- rect IBM cable.
Getting Started 1-4 Magellan ® 1400i LED and Beeper Indicators The scanner ’ s beeper sounds and its green LED illuminates to indicate various functions or errors on the scanner .
Error Codes Product Reference Guide 1-5 Error Codes U pon star tup, if the scanner flashes its indicator LED or sounds an unexpected series of beep tones (other than normal power-up indications), this means the scanner has not passed its auto- matic Selftest and has enter ed FRU 1 isolation mode.
Getting Started 1-6 Magellan ® 1400i NOTES.
Product Reference Guide 2-1 Chapter 2 General Features Double Read Timeout The Double R ead Timeout featur e sets a time limit that determines how much time must pass before reading the same label again (e.g. two identical items in succession). ST ART / END PROGRAMMING BAR CODES 0.
General Features 2-2 Magellan ® 1400i Double Read Timeout — cont. PDF Double Read Timeout The PDF Double R ead Timeout featur e sets a time limit that determines how much time must pass before reading the same PDF417 label again (e.g. two identical PDF417 bar codes in suc- cession).
PDF Double Read Timeout Product Reference Guide 2-3 PDF Double Read Timeout — cont. ST ART / END PROGRAMMING BAR CODES 1.6 Seconds 1.8 Seconds DEF A UL T 1.
General Features 2-4 Magellan ® 1400i Label Gone Timeout This feature sets the time after the last label segment is seen before the scanner pr epares for a new label. PDF Label Gone Timeout This setting specifies how long the Label Gone Timeout timer runs when specifically collecting PDF label segments prior to discarding data.
Sleep Mode Product Reference Guide 2-5 Sleep Mode This feature specifies the amount of time with no bar code reads bef ore the scanner enters sleep mode.
General Features 2-6 Magellan ® 1400i Sleep Mode — cont. ST ART / END PROGRAMMING BAR CODES 6 Minutes 7 Minutes 8 Minutes 9 Minutes 10 Minutes DEF A UL T 12 Minutes 15 Minutes 30 Minutes 1 Hour.
LED and Beeper Indicators Product Reference Guide 2-7 LED and Beeper Indicators Power On Alert Disables or enables the indication (a single beep) that the scanner has finished all its po wer up tests and is now ready for operation.
General Features 2-8 Magellan ® 1400i Good Read: When to Indicate This feature specifies when the scanner will pro vide indication (beep and/or flash its green LED) upon successfully reading a bar code.
LED and Beeper Indicators Product Reference Guide 2-9 Good Read Beep Control This feature enables/disables the scanner ’ s ability to beep upon a successful decode of a bar code. Good Read Beep Frequency Adjusts the good read beep to sound at a selectable lo w , medium or high frequency , selectable from the list below .
General Features 2-10 Magellan ® 1400i Good Read Beep Length S pecifies the duration of a good read beep. ST ART / END PROGRAMMING BAR CODES 60msec DEF A UL T 80msec 100msec 120msec 140msec 160msec 1.
Productivi- ty Index Reporting (PIR) Product Reference Guide 2-11 Good Read Beep Volume Selects the beeper volume (loudness) upon a good read beep . There are three selectable v olume levels. Productivity Index Reporting (PIR) When PIR is enabled, label quality data is appended to decoded data befor e being presented to the POS.
General Features 2-12 Magellan ® 1400i Scanning Features Aiming Pointer This feature enables/disables the Aiming P ointer for all symbologies. Targeted Scanning Mode U pon pressing the button, the scanner will project an aiming pattern to assist in centering over the bar code.
Scanning Features Product Reference Guide 2-13 Target Mode: Active Time S pecifies the time duration the scanner attempts to decode labels while in the targeted mode of operation.
General Features 2-14 Magellan ® 1400i Target Mode: Linger Time S pecifies the time duration the scanner remains in the targeted mode of operation after reading a bar code or after T arget Mode: Active Time has e xpi red, b efo re reve rti ng to Omni -di recti ona l M ode.
Scanning Features Product Reference Guide 2-15 Wake Up Intensity This feature indicates the percentage of ambient light change which will trigger the scanner to wake up from Sleep M ode.
General Features 2-16 Magellan ® 1400i Wake Up Intensity — cont. ST ART / END PROGRAMMING BAR CODES 40% 50% 60% 70% 80%.
Product Reference Guide 3-1 Chapter 3 Interface Related Features At the time of this writing, the Scanner supports the interfaces listed in Ta b l e 3 - 1 . Select the desired interface type from the table, then refer ence the page number given for the customizable features section associated with each interface.
Interface Related Features 3-2 Magellan ® 1400i Table 3-2. Keyboard Wedge Interface Reference I/F T ype PCs Supported A PC/XT w/Alter nate Ke y Encoding B A T , PS/2 25-286, 30-286, 50, 50Z, 60, 70, .
Interface Selection Product Reference Guide 3-3 Interface Selection ST ART / END PROGRAMMING BAR CODES RS-232 Standard RS-232 Wincor-Nixdorf IBM 4683 P or t 5B IBM 4683 P or t 9B IBM 4683 P or t 17 IB.
Interface Related Features 3-4 Magellan ® 1400i Interface Selection — cont. ST ART / END PROGRAMMING BAR CODES K eyboard Wedge B K eyboard Wedge C K eyboard W edge D K eyboard Wedge E K eyboard Wed.
Interface Selection Product Reference Guide 3-5 Interface Selection — cont. ST ART / END PROGRAMMING BAR CODES K eyboard Wedge K K eyboard Wedge L K eyboard Wedge M K eyboard We dge N K eyboard We d.
Interface Related Features 3-6 Magellan ® 1400i Interface Selection — cont. ST ART / END PROGRAMMING BAR CODES K eyboard Wedge T K eyboard W edge U K eyboard Wedge V K eyboard Wedge W K eyboard Wed.
Interface Features Product Reference Guide 3-7 Interface Features Obey/Ignore Host Commands When set to ignore host commands, the scanner will ignore all host commands ex cept for the minimum set necessary to keep the inter face active and transmit labels F or normal operation of the interface, select Obey Host Commands.
Interface Related Features 3-8 Magellan ® 1400i Interface Features — cont. Host Transmission Buffers S pecifies the number of host transmission(s) that may be buffered. By buffering data from a bar code, the scanner can continue to read a new bar code while the old one is being transmitted to the host.
Interface Features Product Reference Guide 3-9 RS-232 Interface Features ST ART / END PROGRAMMING BAR CODES 1200 Baud 2400 Baud 4800 Baud 9600 Baud DEF A UL T 19200 Baud 38400 Baud 57600 Baud 115200 B.
Interface Related Features 3-10 Magellan ® 1400i RS-232 Interface Features — cont. ST ART / END PROGRAMMING BAR CODES 7 Data Bits 8 Data Bits DEF A UL T 1 Stop Bit DEF A UL T 2 Stop Bits Parity = N.
Interface Features Product Reference Guide 3-11 RS-232 Interface Features — cont. Hardware Flow Control Disable Hardware Control— The scanner transmits to the host regar dless of any activity on the CTS line. Enable CTS Flow Control— The CTS signal controls transmission of data to the host.
Interface Related Features 3-12 Magellan ® 1400i RS-232 Interface Features — cont. Intercharacter Delay This delay is inserted after each data character transmitted. If the transmission speed is too high, the system may not be able to receive all characters.
Interface Features Product Reference Guide 3-13 Intercharacter Delay — cont. Software Flow Control Disables/Enables softwar e control using XON/X OFF characters.
Interface Related Features 3-14 Magellan ® 1400i RS-232 Interface Features — cont. Host Echo When enabled, this feature passes all data through the scanner to the host as it comes in. This feature is used for applications where “ daisy chaining” of RS-232 devices onto the same cable is necessary .
Interface Features Product Reference Guide 3-15 RS-232 Interface Features — cont. Host Echo Quiet Interval This setting specifies the time interval of RS-232 channel inactivity which must transpire before the scanner will break the host echo loop to transmit the bar code data that has just been scanned to the host.
Interface Related Features 3-16 Magellan ® 1400i Host Echo Quiet Interval — cont. Signal Voltage: Normal/TTL S pecifies whether the RS-232 inter face provides TTL levels on the output pins TxD and R TS.
Interface Features Product Reference Guide 3-17 RS-232 Interface Features — cont. RS-232 Invert Enables/disables inversion of RS-232 TXD and RXD signals. Beep on ASCII BEL Enables/disables ability of scanner to beep (sound a good read tone) on r eceiving an ASCII BEL (07 hex).
Interface Related Features 3-18 Magellan ® 1400i RS-232 Interface Features — cont. Beep on Not on File Select for the host to beep (or not) when a not-on-file (host command) condition is detected by the host.
Interface Features Product Reference Guide 3-19 RS-232 Interface Features — cont. ACK NAK Options This enables/disables the ability of the scanner to support the RS-232 ACK/NAK protocol. When configured, the scanner and/or host sends an “ ACK” when it receives data pr operly , and sends “NAK” when the data is in error .
Interface Related Features 3-20 Magellan ® 1400i RS-232 Interface Features — cont. ACK Character NAK Character ST ART / END PROGRAMMING BAR CODES Sets the ACK char acter from the set of ASCII characters or any decimal value from 000 to 255. P ad entries of less than three di gits with zeros, as in “005”.
Interface Features Product Reference Guide 3-21 RS-232 Interface Features — cont. Retry on ACK NAK Timeout Enables/disables retry after the configurable ACK NAK T imeout V alue (set in the follo wing fea- ture ) ha s ex pire d.
Interface Related Features 3-22 Magellan ® 1400i RS-232 Interface Features — cont. ACK NAK Retry Count ST ART / END PROGRAMMING BAR CODES This feature sets the n umber of times for the scanner to retry a label transmission under a retr y condition.
Interface Features Product Reference Guide 3-23 RS-232 Interface Features — cont. ACK NAK Error Handling This item specifies the method the scanner will use to handle errors detected while waiting to receive the A CK character from the host. Errors include unrecognized host commands and com- munication errors such as parity or framing errors.
Interface Related Features 3-24 Magellan ® 1400i RS-232 Interface Features — cont. Transmission Failure Indication Enables/disables bad-label indication upon transmission failure. IBM-USB Interface Features IBM-USB Device usage The IBM-USB protocol allows for the scanner to be identified as one of two differ ent types of bar code scanners.
Interface Features Product Reference Guide 3-25 IBM IBM Transmit Labels in Code 39 Format This feature enables/disables scanner's ability to set a symbology identifier for a specified label to Code 39 before transmitting that label data to an IBM host.
Interface Related Features 3-26 Magellan ® 1400i Wand Emulation Supported Symbologies The W and Emulation interface will transmit bar code data as a wand device would.
Interface Features Product Reference Guide 3-27 Wand Emulation — cont. Bar/Space Polarity Low/H igh — Black will be transmitted as a low voltage level (0 to +0.7V) and space as high level (+2.4 to +5.25V). High/Lo w — Black will be transmitted as a high voltage level (+2.
Interface Related Features 3-28 Magellan ® 1400i Wand Emulation — cont. Signal Speed The speed of the transmission can be set. This selects the width of the minimum narrow bar . 330 microseconds 660 microseconds Transmit Trailing Noise The transmission of noise pulses after the label may be enabled or disabled.
Interface Features Product Reference Guide 3-29 Wand Emulation — cont. Transmit Leading Noise The transmission of noise pulses before the bar code may be enabled or disabled. Symbology Conversion W and Emulation can conver t all bar codes to a single symbology .
Interface Related Features 3-30 Magellan ® 1400i Keyboard Wedge and USB Keyboard As a keyboard interface, the scanner supports most popular PCs and IBM terminals. The instal- lation of the wedge is a fairly simple process that doesn ’ t require any changes of software or hard- ware.
Interface Features Product Reference Guide 3-31 Keyboard Wedge — cont. ST ART / END PROGRAMMING BAR CODES Italy Norwa y P or tugal Spain Sweden Switzerland Japan 106 K ey Hungar y Czech.
Interface Related Features 3-32 Magellan ® 1400i Keyboard Wedge — cont. Caps Lock State S pecifies the format in which the scanner sends character data.
Interface Features Product Reference Guide 3-33 Keyboard Wedge — cont. Power-On Simulation All PCs check the keyboard status during the po wer-on Selftest. It is r ecommended that you enable this function if you are working without a keyboar d installation.
Interface Related Features 3-34 Magellan ® 1400i Keyboard Wedge — cont. Control Characters S pecifies how the scanner transmits ASCII control characters to the host.
Interface Features Product Reference Guide 3-35 Keyboard Wedge — cont. Wedge Quiet Interval Quiet Interval is the amount of time to look for keyboard activity before the scanner breaks the keyboard connection in or der to transmit data to the host. NO TE This feature does not apply to the USB K eyboard interface.
Interface Related Features 3-36 Magellan ® 1400i Keyboard Wedge — cont. Intercharacter Delay NO TE This feature does not apply to the USB K eyboard interface. ST ART / END PROGRAMMING BAR CODES One-half of the delay specified below is inser ted between scancodes within each character .
Product Reference Guide 4-1 Chapter 4 Data Editing Data Editing Overview When a bar code is scanned, additional information can be sent to the host computer along with the bar code data. This combination of bar code data and supplementary user-defined data is called a “ message string.
Data Editing 4-2 Magellan ® 1400i • Enter prefix es and suffixes in the order in which you want them to appear on the output. Global Prefix/Suffix U p to 20 ASCII characters may be added as a prefix (in a position before the bar code data) and/ or as a suffix (in a position following the bar code data) as indicated in Figure 4-2 .
Global Pre- fix/Suffix Product Reference Guide 4-3 Global Prefix/Suffix — cont. ST ART / END PROGRAMMING BARCODES Sets up to 20 characters each from the set of ASCII characters or an y hex value from 0 to FF .
Data Editing 4-4 Magellan ® 1400i AIM ID AIM (Automatic I dentification Manufacturers) label identifiers ar e assigned from a globally standardized list — as opposed to custom label ID characters you select y ourself — and can be included with scanned bar code data.
Label ID Product Reference Guide 4-5 Label ID A L a b el I D is a c us t o mi z ab l e co d e of u p to t w o A S C II c h ar a c te r s (0 0 - FF h e x) , u se d to i d en t i fy a bar code (symbology) type. See Appendix D , Def ault Settings , for a listing for common symbolo- gies.
Data Editing 4-6 Magellan ® 1400i Label ID — cont. ST ART / END PROGRAMMING BARCODES Label ID T ransmission: Disable Label ID P osition: Before Bar Code Data DEF A UL T Label ID P osition: After Ba.
Label ID Product Reference Guide 4-7 Label ID — cont. ST ART / END PROGRAMMING BARCODES DEF A UL T SETTING FOR THIS FEA TURE: E (45 hex) Set UPC-E w/P2 Addon Label ID Character(s) Set UPC-E w/P5 Add.
Data Editing 4-8 Magellan ® 1400i Label ID — cont. ST ART / END PROGRAMMING BARCODES DEF A UL T SETTING FOR THIS FEA TURE: F (46 hex) Set EAN-13 w/P2 Addon Label ID Character(s) Set EAN-13 w/P5 Add.
Label ID P ro d u ct R e fe re n ce G u id e 4-9 Label ID — cont. ST ART / END PROGRAMMING BARCODES DEF A UL T SETTING FOR THIS FEA TURE: G8 (4738 hex) Set GTIN w/C128 addon Label ID Character(s) Se.
Data Editing 4-10 Magellan ® 1400i Label ID — cont. ST ART / END PROGRAMMING BARCODES DEF A UL T SETTING FOR THIS FEA TURE: % (25 hex) Set Codabar Label ID Character(s) Set Code 93 Label ID Charact.
Case Con- version Product Reference Guide 4-11 Case Conversion This feature can convert scanned bar code data to either all lo wer case (a through z) or all upper case (A through Z) characters. NO TE Case con version affects ONL Y scanned bar code data, and does not affect Label ID , Prefix, Suffix, or other appended data.
Data Editing 4-12 Magellan ® 1400i Character Conversion Character conversion is an eight byte configuration item. The eight bytes ar e 4 character pairs represented in hexadecimal ASCII v alues. The first character in the pair is the character that will be converted.
Product Reference Guide 5-1 Chapter 5 Symbologies The scanner supports the following symbologies (bar code types). Options for each symbology are included in this chapter . Factory Defaults— for the standard RS-232 interface are indicated in bold text throughout this section.
Symbologies 5-2 Magellan ® 1400i UPC-A — continued Check Digit Transmission Enable this option to transmit the check digit along with UPC-A bar code data. Expand UPC-A to EAN-13 Expands UPC-A data to the EAN-13 data format. Selecting this featur e also changes the sym- bology ID to match those required for EAN-13.
UPC-A Product Reference Guide 5-3 UPC-A — continued Number System Transmission This feature enables/disables transmission of UPC-A System N umber . UPC-A Minimum Reads This feature specifies the minimum number of consecutive times a UPC-A label must be decoded before it is accepted as a good read.
Symbologies 5-4 Magellan ® 1400i UPC-A — continued UPC-A In-store Minimum Reads This feature specifies the minimum number of consecutive times an in-store printed label must be decoded before it is accepted as a good read.
UPC-E Product Reference Guide 5-5 UPC-E The following options apply to the UPC-E symbology . Disable/Enable UPC-E When disabled, the scanner will not read UPC-E bar codes. Check Digit Transmission Enable this option to transmit the check digit along with UPC-E bar code data.
Symbologies 5-6 Magellan ® 1400i UPC-E — continued Number System Digit The N umber System Digit (NSD) which is always a zero (0) in the leading position can be optionally included (or not) with scanned bar code data. Expand UPC-E to UPC-A Enables/disables expansion of UPC-E labels to UPC-A.
UPC-E Product Reference Guide 5-7 UPC-E — continued Expand UPC-E to EAN13 Enables/disables expansion of UPC-E labels to EAN-13. Selecting this featur e also changes the symbology ID to match those required for EAN-13.
Symbologies 5-8 Magellan ® 1400i GTIN The following options apply to the GTIN label data format. Expand UPC/EAN to GTIN When this feature is enabled, the scanner will translate UPC/EAN labels to the 14 digit GTIN format.
EAN-13 Product Reference Guide 5-9 EAN-13 The following options apply to the EAN-13 symbology . Disable/Enable EAN-13 When disabled, the scanner will not read EAN-13 bar codes. Check Digit Transmission Enable this option to transmit the check digit along with EAN-13 bar code data.
Symbologies 5-10 Magellan ® 1400i EAN-13 — continued EAN-13 Flag 1 Character Enables/disables transmission of an EAN/JAN13 Fl ag1 character . ISBN When enabled, this feature truncates the leading three digits from labels that contain ISBN (International S tandard Book N umber) and appends an ISBN check character to the end of the label.
EAN-13 Product Reference Guide 5-11 EAN-13 — continued Minimum Reads This feature specifies the minimum number of consecutive times an EAN-13 label must be decoded before it is accepted as a good read.
Symbologies 5-12 Magellan ® 1400i EAN-8 The following options apply to the EAN-8 symbology . Disable/Enable EAN-8 When disabled, the scanner will not read EAN-8 bar codes. Check Digit Transmission Enable this option to transmit the check Digit along with EAN-8 bar code data.
EAN-8 Product Reference Guide 5-13 EAN-8 — continued Expand EAN-8 to EAN-13— Expands EAN-8 data to the EAN-13 data format. Selecting this feature also changes the symbology ID to match those requir ed for EAN-13.
Symbologies 5-14 Magellan ® 1400i Enable EAN Two-Label Enables/disables the ability of the scanner to decode EAN two-label pairs. Enable EAN Two-Label Combined Enables/disables the transmitting of an EAN two label pair as one label.
Add-ons Product Reference Guide 5-15 Add-ons Add-ons (or supplemental characters) are commonly added to the end of UPC/EAN bar codes. The scanner will read the add-ons if they are enabled and in the field of view . Three add-on types are supported: 2-digit, 5-digit and Code 128 add-ons.
Symbologies 5-16 Magellan ® 1400i Add-ons — continued ST ART / END PROGRAMMING BAR CODES Disable Optional 2-Digit Add-ons DEF A UL T Enable Optional 2-Digit Add-ons Disable Optional 5-Digit Add-ons.
RSS-14 Product Reference Guide 5-17 RSS-14 The following options apply to the RSS-14 symbology . Disable/Enable RSS-14 When this feature is disabled, the scanner will not read RSS-14 bar codes. RSS-14 UCC/EAN 128 Emulation When enabled, RSS-14 bar codes will be translated to the UCC/EAN 128 label data format.
Symbologies 5-18 Magellan ® 1400i RSS-14 — continued Minimum Reads This feature specifies the minimum number of consecutive times an RSS-14 label must be decoded before it is accepted as a good re ad.
RSS-14 Product Reference Guide 5-19 RSS-14 — continued RSS-14 2D Component This setting enables/disables RSS-14/Micro PDF417 composite labels. NO TE Both RSS-14 and Micro PDF417 m ust be enabled to read these composite labels.
Symbologies 5-20 Magellan ® 1400i RSS Expanded The following options apply to the RSS Expanded symbology . Disable/Enable RSS Expanded When this feature is disabled, the scanner will not read RSS Expanded bar codes. RSS Expanded UCC/EAN 128 Emulation When enabled, RSS Expanded bar codes will be translated to the UCC/EAN 128 label data for- mat.
RSS Expanded Product Reference Guide 5-21 RSS Expanded — continued Length Control Fixed Length Decoding— Wh en fixe d l en gt h d eco di ng is en abl ed , t he sc ann er wi ll de cod e a bar code if the label length matches one of the configurable fixed lengths.
Symbologies 5-22 Magellan ® 1400i RSS Expanded — continued RSS Expanded Length 1, Length 2 Programming Instructions 1. Scan the ST AR T/END bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) repr esent- ing the length in decimal notation.
RSS Expanded Product Reference Guide 5-23 RSS Expanded — continued Minimum Reads This feature specifies the minimum number of consecutive times an RSS Expanded label must be decoded before it is accepted as a good read.
Symbologies 5-24 Magellan ® 1400i RSS Expanded — continued RSS Expanded 2D Component This setting enables/disables RSS Expanded/Micro PDF417 composite labels. RSS Limited The following options apply to the RSS Limited symbology . Disable/Enable RSS Limited When this feature is disabled, the scanner will not read RSS Limited bar codes.
RSS Limited Product Reference Guide 5-25 RSS Limited — continued RSS Limited UCC/EAN 128 Emulation When enabled, RSS Limited bar codes will be translated to the UCC/EAN 128 label data for- mat. Minimum Reads This feature specifies the minimum number of consecutive times an RSS Limited label must be decoded before it is accepted as a good read.
Symbologies 5-26 Magellan ® 1400i RSS Limited — continued RSS Limited 2D Component This setting enables/disables RSS Limited/Micro PDF417 composite labels.
Code 39 Product Reference Guide 5-27 Code 39 The following options apply to the Code 39 symbology . Disable/Enable Code 39 When this feature is disabled, the scanner will not read Code 39 bar codes. Check Character Calculation When enabled, the scanner will calculate the check character of the labels.
Symbologies 5-28 Magellan ® 1400i Code 39 — continued Check Character Transmit Enable this option to transmit the check character with scanned bar code data.
Code 39 Product Reference Guide 5-29 Code 39 — continued Code 39 Full ASCII Enables/disables the translation of Code 39 characters to Code 39 full-ASCII characters .
Symbologies 5-30 Magellan ® 1400i Code 39 — continued Length Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
Code 39 Product Reference Guide 5-31 Code 39 — continued Code 39 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T/END bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) represent- ing the length in decimal notation.
Symbologies 5-32 Magellan ® 1400i Code 39 — continued Code 39 Stitching Enables/disables stitching for Code 39 labels. When parts of a Code 39 bar code are presented to the scanner with this featur.
Pharmacode 39 Product Reference Guide 5-33 Pharmacode 39 The following options apply to the Pharmacode 39 symbology . Disable/Enable Pharmacode 39 When this feature is disabled, the scanner will not read P harmacode 39 bar codes. Start/Stop Characters Enables or disables transmission of Pharmacode 39 start/stop characters.
Symbologies 5-34 Magellan ® 1400i Pharmacode 39 — continued Check Character Transmit Enable this option to transmit the check character with scanned bar code data.
Code 128 and UCC/EAN 128 Product Reference Guide 5-35 Code 128 and UCC/EAN 128 The following options apply to the Code 128 and EAN 128 symbologies. Code 128— When this feature is disabled, the scanner will not read Code 128 bar codes. UCC/EAN 128— Enables/disables ability of scanner to translate UCC/EAN 128 labels to the EAN 128 data format.
Symbologies 5-36 Magellan ® 1400i Code 128 and UCC/EAN 128 — continued Transmit Function Characters Enables/disables transmission of Code128 function characters 1, 2, 3, and 4.
Code 128 and UCC/EAN 128 Product Reference Guide 5-37 Code 128 and UCC/EAN 128 — continued Length Control Fixed Length Decoding— Wh en fixe d l en gt h d eco di ng is en abl ed , t he sc ann er wi ll de cod e a bar code if the label length matches one of the configurable fixed lengths.
Symbologies 5-38 Magellan ® 1400i Code 128 and UCC/EAN 128 — continued Code 128 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) repr esent- ing the length in decimal notation.
Code 128 and UCC/EAN 128 Product Reference Guide 5-39 Code 128 and UCC/EAN 128 — continued Code 128 Stitching Enables/disables stitching for Code 128 labels.
Symbologies 5-40 Magellan ® 1400i Interleaved 2 of 5 The following options apply to the Interleav ed 2 of 5 (I 2 of 5) symbology . Disable/Enable Interleaved 2 of 5 When this feature is disabled, the scanner will not read I nterleaved 2 of 5 bar codes.
Interleaved 2 of 5 Product Reference Guide 5-41 Interleaved 2 of 5 — continued Check Digit Transmit Enable this option to transmit the check digit with scanned bar code data.
Symbologies 5-42 Magellan ® 1400i Interleaved 2 of 5 — continued Length Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
Interleaved 2 of 5 Product Reference Guide 5-43 Interleaved 2 of 5 — continued Interleaved 2 of 5 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code.
Symbologies 5-44 Magellan ® 1400i Interleaved 2 of 5 — continued Interleaved 2 of 5 Stitching Enables/disables stitching for Interleaved 2 of 5 labels.
Interleaved 2 of 5 Product Reference Guide 5-45 Interleaved 2 of 5 — continued Minimum Reads This feature specifies the minimum number of consecutive times an I nterleaved 2 of 5 label must be decoded before it is accepted as a good read.
Symbologies 5-46 Magellan ® 1400i Codabar The following options apply to the Codabar symbology . Disable/Enable Codabar When this feature is disabled, the scanner will not read Codabar bar codes. Check Character Verification When enabled, the scanner will verify the check character of the labels.
Codabar Product Reference Guide 5-47 Codabar — continued Check Character Transmit Enable this option to transmit the check character with scanned bar code data.
Symbologies 5-48 Magellan ® 1400i Codabar — continued Length Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
Codabar Product Reference Guide 5-49 Codabar — continued Codabar Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) represent- ing the length in decimal notation.
Symbologies 5-50 Magellan ® 1400i Codabar — continued Start/Stop Character Type Codabar has four pairs of S tar t/S top patterns. Select one pair to match your application. Start/Stop Character Transmission The transmission of start and end characters of Codabar is selected below .
Codabar Product Reference Guide 5-51 Codabar — continued Start/Stop Character Match This feature enables/disables the requir ement that star t and stop characters match .
Symbologies 5-52 Magellan ® 1400i Codabar — continued Minimum Reads This feature specifies the minimum number of consecutive times a Codabar label must be decoded before it is accepted as a good re ad.
Code 93 Product Reference Guide 5-53 Code 93 The following options apply to the Code 93 symbology . Disable/Enable Code 93 When this feature is disabled, the scanner will not read Code 93 bar codes.
Symbologies 5-54 Magellan ® 1400i Code 93 — continued Length Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
Code 93 Product Reference Guide 5-55 Code 93 — continued Code 93 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) represent- ing the length in decimal notation.
Symbologies 5-56 Magellan ® 1400i Code 93 — continued Code 93 Stitching Enables/disables stitching for Code 93 bar codes. When parts of a Code 93 label are presented to the scanner with this featur.
MSI/Plessey Product Reference Guide 5-57 MSI/Plessey The following options apply to the MSI/Plessey symbology . Disable/Enable MSI/Plessey When this feature is disabled, the scanner will not read MSI/P lessey bar codes. Check Digit Verification This feature specifies whether one or two check digits are to be calculated and v erified.
Symbologies 5-58 Magellan ® 1400i MSI/Plessey — continued Check Digit Transmit When this option is enabled, the scanner will transmit one-digit or two-digit check digits, depending upon the setting for check digit verification.
MSI/Plessey Product Reference Guide 5-59 MSI/Plessey — continued Length Control Fixed Length Decoding— Wh en fixe d l en gt h d eco di ng is en abl ed , t he sc ann er wi ll de cod e a bar code if the label length matches one of the configurable fixed lengths.
Symbologies 5-60 Magellan ® 1400i MSI/Plessey — continued MSI/Plessey Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) repr esent- ing the length in decimal notation.
MSI/Plessey Product Reference Guide 5-61 MSI/Plessey — continued MSI/Plessey Stitching Enables/disables stitching for MSI/Plessey bar codes. When parts of an MSI/Plessey label are presented to the s.
Symbologies 5-62 Magellan ® 1400i MSI/Plessey — continued Minimum Reads This feature specifies the minimum number of consecutive times an MSI/Plessey label must be decoded before it is accepted as a good re ad.
Standard 2 of 5 Product Reference Guide 5-63 Standard 2 of 5 The following options apply to the S tandard 2 of 5 symbology . Disable/Enable Standard 2 of 5 When this feature is disabled, the scanner will not read S tandard 2 of 5 bar codes. Check Digit Verification When enabled, the scanner will verify the check digit of the labels.
Symbologies 5-64 Magellan ® 1400i Standard 2 of 5 — continued Check Digit Transmit When this option is enabled, the scanner will transmit the check digit.
Standard 2 of 5 Product Reference Guide 5-65 Standard 2 of 5 — continued Length Control Fixed Length Decoding— Wh en fixe d l en gt h d eco di ng is en abl ed , t he sc ann er wi ll de cod e a bar code if the label length matches one of the configurable fixed lengths.
Symbologies 5-66 Magellan ® 1400i Standard 2 of 5 — continued Standard 2 of 5 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) repr esent- ing the length in decimal notation.
Standard 2 of 5 Product Reference Guide 5-67 Standard 2 of 5 — continued Standard 2 of 5 Stitching Enables/disables stitching for S tandard 2 of 5 bar codes.
Symbologies 5-68 Magellan ® 1400i Standard 2 of 5 — continued Minimum Reads This feature specifies the minimum number of consecutive times a S tandard 2 of 5 label must be decoded before it is accepted as a good re ad.
PDF417 Product Reference Guide 5-69 PDF417 The following options apply to the PDF417 symbology . Disable/Enable PDF417 When this feature is disabled, the scanner will not read PDF417 bar codes. PDF417 Minimum Reads This feature specifies the minimum number of consecutive times a PDF417 label must be decoded before it is accepted as a good read.
Symbologies 5-70 Magellan ® 1400i PDF417 — continued Length Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
PDF417 Product Reference Guide 5-71 PDF417 — continued PDF417 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) represent- ing the length in decimal notation.
Symbologies 5-72 Magellan ® 1400i Micro PDF417 The following options apply to the Micro PDF417 symbology . Disable/Enable Micro PDF417 When this feature is disabled, the scanner will not read M icro PDF417 bar codes.
Micro PDF417 Product Reference Guide 5-73 Micro PDF417 — continued Micro PDF 128 Emulation S pecifies which Label I.D. to use for Micro PDF labels when Code 128 or EAN128 emulation is active. •I f Micro PDF 128 Emulation is disabled, and AIM ID is enabled, and the scanner is perform- ing EAN128 or Code 128 emulation; the MicroPDF AIM I.
Symbologies 5-74 Magellan ® 1400i Micro PDF417 — continued Micro PDF417 Minimum Reads This feature specifies the minimum number of consecutive times a M icro PDF417 label must be decoded before it is accepted as a good read.
Micro PDF417 Product Reference Guide 5-75 Micro PDF417 — continued Length Control Fixed Length Decoding— Wh en fixe d l en gt h d eco di ng is en abl ed , t he sc ann er wi ll de cod e a bar code if the label length matches one of the configurable fixed lengths.
Symbologies 5-76 Magellan ® 1400i Micro PDF417 — continued Micro PDF417 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) repr esent- ing the length in decimal notation.
Product Reference Guide A-1 Chapter A Product Specifications Optical and Read Performance Parameters Scanner Dimensions Parameter S pecification Scan V olume 80 cubic inches Scan P atter n 100 lines S.
A-2 Magellan ® 1400i Physical Properties Electrical Parameters Environmental Parameters Other Parameters Parameter S pecification Dimensions (Scanner only): 66mm x 82mm x 154mm ( 2.6” x 3.23” x 6”) Dimensions (Scanner w/ Stand): 97mmx 82mm x 181mm (3.
Product Reference Guide B-1 Chapter B Cable Pinouts Standard Cable Pinouts (Primary Interface Cables) RS-232 IBM Port 5B/9B/17 1 2C T S 3 4R T S 5R X D 6T X D 7 8 VCC IN 9G N D 10 1 2 3 4D A T A - 5 6.
Cable Pinouts B-2 Magellan ® 1400i IBM USB USB & USB Keyboard Wand Emulation Keyboard Wedge 1 2 3 4D - 5 6D + 7 8V I N 9G N D 10 1 2 3 4D - 5 6D + 7 8V B U S _ V I N 9G N D 10 1 2 3 W AND~ 4 5 6 .
Product Reference Guide C-1 Chapter C Alpha-Numeric Pad A B C D E F.
C-2 Magellan ® 1400i Alpha-Numeric Pad 1 2 3 0 9 8 7 6 5 4.
Product Reference Guide D-1 Appendix D Default Settings Standard Feature Defaults The table immediately below lists the default settings for the standar d RS-232 interface. Feature Std. RS-232 Setting Interface-Specific Exceptions Pag e # Double Read Timeout 0.
D-2 Magellan ® 1400i Obey/Ignore Host Commands Obey Host Commands 3-7 Host T ransmission Buff ers Buffers=2 IBM: Buffers=1 Wincor/Nixdorf: Buffers=1 3-8 Baud Rate 9600 Baud 3-9 Data Bits 8 Data Bits .
Standard Feature Defaults Product Reference Guide D-3 IBM T ransmit Labels in Code 39 F or mat —I B M : D i s a b l e 3-25 W and Emulation: Bar/Space P olarity — W and Emulation: Bar/ Space = High.
D-4 Magellan ® 1400i Label ID Label ID P osition: Before Bar Code Data IBM: Disable K eyboard Wedge: Disable 4-5 UPC-A Label ID A 4-6 UPC-A w/P2 Addon Label ID A 4-6 UPC-A w/P5 Addon Label ID A 4-6 U.
Standard Feature Defaults Product Reference Guide D-5 GTIN w/P5 addon Label ID G5 4-8 GTIN w/C128 addon Label ID G6 4-9 RSS-14 Label ID R4 Wincor/Nixdorf: ‘E’ 4-9 RSS Expanded Label ID RX Wincor/N.
D-6 Magellan ® 1400i In-store Minimum Reads 1 5-4 Disable/Enab le UPC-E Enable 5-5 Check Digit T ransmission Send Check Digit 5-5 Number System Digit Exclude Sys- tem Number 5-6 Expand to UPC-E to UP.
Standard Feature Defaults Product Reference Guide D-7 Optional 5-Digit Addons Disable 5-16 Optional Code 128 Add-ons Disable 5-16 Disable/Enab le RSS-14 Disable 5-17 RSS-14 UCC/EAN 128 Emulation Disab.
D-8 Magellan ® 1400i Code 39 Minimum Reads 1 5-32 Disable/Enab le Phar- macode 39 Disable 5-33 Phar macode 39 Star t/ Stop Characters Don’t T ransmit 5-33 Phar macode 39 Check Char acter T ransmit .
Standard Feature Defaults Product Reference Guide D-9 Disable/Enab le Coda- bar Disable 5-46 Codabar Check Char- acter V erification Disable 5-46 Codabar Check Char- acter T ransmit Enable 5-47 Codaba.
D-10 Magellan ® 1400i Number of Check Characters 1 Check Character 5-58 MSI/Plessey Length Control Va r i a b l e Length 5-65 MSI/Plessey Length 1 4 5-60 MSI/Plessey Length 2 16 5-60 MSI/Plessey Stit.
Product Reference Guide E-1 Appendix E Keyboard Function Key Mappings Keyboard Model Cross Reference Ta b l e E - 1 summarizes the keyboard models, their defined protocol, scancode set, and some unique features. The remaining tables in this chapter pro vide the function key maps associated with each of the scancode sets.
E-2 Magellan ® 1400i Table E-2. Scanset 1 Function Key Map Table E-3. Scanset 2 Function Key Map ASCII (hex) ASCII code Key Scancode 00 NUL AL T right Make E0h 38h 01 SOH AL T right Break E0h B8h 02 .
Keyboard Model Cross Reference Product Reference Guide E-3 Table E-4 . Scanset 3, 102-Key Function Key Map 18 CAN F3 04h 19 EM F4 0Ch 1A SUB F5 03h 1B ESC ESC 76h 1C FS F7 83h 1D GS F8 0Ah 1E RS F9 01.
E-4 Magellan ® 1400i Table E-5. Scanset 3 122-Key Function Key Map ASCII (hex) ASCII code Key Scancode 00 NUL AL T Right Make 39h 01 SOH AL T Right Break F0h 39h 02 STX AL T left Make 19h 03 ETX AL T.
Keyboard Model Cross Reference Product Reference Guide E-5 Table E-6. Japanese DOS Function Key Map ASCII value ASCII code Ke y Scancode 00h NUL AL T right Make 31h 01h SOH AL T right Break B1h 02h ST.
E-6 Magellan ® 1400i Table E-7. NEC 9801-Key Function Key Map ASCII value ASCII code Key Scancode 00h NUL un used n/a 01h SOH CR 1Ch 02h STX CAPS LOCK ON (make) 71h 03h ETX CAPS LOCK OFF (break) F1h .
Product Reference Guide F-1 Chapter F Host Commands Accepting RS-232 Commands The scanner responds to the following RS-232 commands: If one of the abov e commands is received, the scanner will perform the steps indicated for the command. Host commands for other interfaces are also available.
F-2 Magellan ® 1400i NOTES.
Product Reference Guide G-1 Chapter G Sample Symbols 0 1234567890 1234567890 Code 128 9 780330 290951 BC321 123456-9$ 123456 UPC-A Code 128 Code 39 Code 93 Interleav ed 2 of 5 EAN-13 Code 2 of 5 A1357.
G-2 Magellan ® 1400i Sample Symbols (01)00123456789012 RSS-14 0100123456789050 RSS Expanded.
ASCII Char t ASCII Char . Hex No . ASCII Char . Hex No . ASCII Char . Hex No . ASCII Char . Hex No . NUL SOH STX ETX EO T ENQ ACK BEL BS HT LF VT FF CR SO SI DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN EM SUB.
A ustralia Datalogic Scanning Pty Ltd Nor th Ryde, A ustralia T elephone: [61] (2) 9870 3200 F ax: [61] (2) 9878 8688 France and Benelux Datalogic Scanning Sarl LES ULIS Cede x, F rance T elephone: [33].
Ein wichtiger Punkt beim Kauf des Geräts Datalogic Scanning 1400I (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Datalogic Scanning 1400I noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Datalogic Scanning 1400I - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Datalogic Scanning 1400I reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Datalogic Scanning 1400I erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Datalogic Scanning 1400I besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Datalogic Scanning 1400I verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Datalogic Scanning 1400I. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Datalogic Scanning 1400I gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
