Benutzeranleitung / Produktwartung DVG-1402S des Produzenten D-Link
Zur Seite of 59
D-Link DVG-1402S 2Voice + 4SW VoIP Router Manual Building Networks for People Version B.1.
Contents Package Cont ents ........................................................................................................... 3 Introduc tion ....................................................................................................
2 Home > VoIP > Manage Features > Reject In coming Ca ll........................................ 31 Home > VoIP > Manage Features > Block Out going Ca ll ......................................... 32 Home > DHCP ...................
3 Package Contents • D-Link DVG-1402S Router • Power Adapter - AC 12V, 1.2A • Manual and Warranty on CD • Quick Installation Guide • Ethernet Cable (All the Ether net port s on DVG-1402S are.
4 Introduction The D-Link DVG-1402S High-Speed VoI P Rout er Links traditional telephony net wo rks to IP networks with conventional telephony devices such a s anal og phones or fax machines. It can reduce long distance p hone cha rg es and delive r toll-quality voice communication over the I P network.
5 Rear Panel Connections Phone Connections Connect to your phones using standard phone cabling. All Ethernet Ports (WAN and LAN) are auto MDI/MDIX, meaning you can use either a straight-through or a crossover Ethernet cable. Auto MDI/MDIX LAN Ports Connect the Ethernet cable from computers on your LAN to these ports.
6 Front Panel LEDs Power LED A solid light indicates a valid connection to the power supply. Status LED A blinking LED indicates the DVG-1402S is functioning properly. WAN LED An active LED indicates a link has been established. A blinking LED indicates activity on the WAN port.
7 Features • 1 NWay 10/100BASE-TX Fast Ethernet port for WAN-connection • 4 NWay 10/100BASE-TX Fast Ethernet port for LAN-connection • 2 Foreign Exchange Subscriber (FXS) POTS ports (RJ-11 Jacks) • Voice Activity Detection (VAD) /Comfort Noise Generation (CNG) • Silence suppression to reduce bandwidt h consumption.
8 Installation For a typical setup at hom e, please do the followi ng: 1. You will need broadband In ternet access (a Cable or DSL-subscriber line into your home or office) 2. Consult with your Cable or DSL pro vider for proper installati on of the modem 3.
9 Using the Configuration Wizard Whenever you want to configure your network or the DVG-1402S, you can access the Config uration Menu by opening the web-bro w ser and typing in the IP Address of the DVG-1402S. The DVG-1402S default IP Address is shown to the right: • Open the web browser • Type in the IP Address of the Router (http://192.
10 Home > WAN Dynamic Choose Dynamic IP Address to obtain IP Address information automatically from your ISP. This option shoul d be selected if your ISP has not supplied you with an IP address. T his option is commonly used for Cable modem service s.
11 MAC address on the Broadband Route r. You can use the “Clone MAC Address” button to copy the MAC address of the Ethernet Card installed by your ISP and repla ce the WAN MAC address with the MAC address of the rout er. It is not recom mended that you change the default MAC add re ss unless required by your ISP.
12 Home > WAN > Static IP Address Static IP Address Choose Static IP Address if a ll WAN IP information is provided to you by your ISP. You will nee d to enter in the IP addre ss, subnet mask, gateway address, and DNS address(es) provided to you by your ISP.
13 Input the primary DNS (Domain Name Server) IP addre ss provided by your ISP This is an optional DNS Address entry to be used if the primary DNS Fails. Upstream Bandwidth The upstream bandwidth can be set for the type of packets that the will be sent.
14 Home > WAN > PPPoE PPPoE Choose this option if your ISP uses PPPoE. (Most DSL users will select this option. ) Password Enter The PPPoE user name provided to you by your ISP. Retype Password Retype the password entered in the previous field. Service Name Enter the Service Name provided by your ISP (optional).
15 provided by your ISP T h i s i s a n optional DNS Address entry to be used if the primary DNS fails. The upstream bandwidth can be set to suit the type of packets that the connection will be se nding. The bandwidth can be maximized for voice packets and limited for data that requires less throughput.
16 Home > LAN LAN is short for Local Area Network. This is co nsidered your intern al network. These are the IP settings of the LAN interface fo r the DVG-1402S and may be referred to as Private settings. You may change the LAN IP addre ss if needed.
17 Home > VoIP All of the screens necessary to setup and conf igure the route r to ha ndle VoIP traffic are accessed from the screen shown b elo w. To access any of the individual configur ation screens, click on the co rrespondin g radio-button and that screen will appea r.
18 Home > VoIP > Server Confi guration The Router can be configured to handle voice signals over the Internet Protocol (Voice over IP − VoIP). The screen show n to the right, along with those .
19 Server FQDN Use this drop-down menu to Enable or Disable the Server Fully Qualified Domain Name (FQDN) function. This is disabled when the SIP URL domain na me is differe nt from the SIP proxy server domain name.
20 Home > VoIP > Provisioning Provisioning Function Use this drop-down m enu to Enable or Disable th e Provisioning Function on the router. Server URL Enter the URL of the Provisioning Server in this field. Proxy Address Enter the IP address of the Proxy Server in this field.
21.
22 Home > VoIP > STUN Configuration STUN is useful if you need to use the DV G-1402 S behind a modem or router that provides the conne ction to your ISP and then to the Intern et and does not support symetric NAT. You will need acce ss to a ST UN server on the Internet a nd its IP address to use STUN o n the DVG-140 2S.
23 Home > VoIP > User Agent Same Phone Number Use this field to Enable or Disable the use of the same telephone number for the User Agent as for the Serv er Agent. Index Use this field to assign line 1 or line 2 telephone sockets (on the back of the router) to the information entered in the Use r Agent.
24 Home > VoIP > Peer to Peer Phone Number The telephone number assigned to this entry . User IP Address Enter the IP address of the remote peer in this field. Port Enter the UDP port number the rem ote peer will use to make the connection in this field .
25 Home > VoIP > Telephony Index Use this field to assign line 1 or line 2 telephone sockets (on the back of the router) to the information entered in the Use r Agent.
26 Home > VoIP > Speed Dial Index A number used to identify the cu rrent speed dial tabl e entry. Dial Code A numerical code that will corre spond to the phone numbe r entered in the field below. You will dial this number, and the router will dial the co rresponding telephone number.
27 Home > VoIP > Misc. Instead of adding additional lines to handl e different telephone numbers, distin ctive rings can be set to allow more than one telephone number to reach the sam e line. Calls coming in on different numbe rs on the same line can b e identif ied by their distinctive ring pattern.
28 Home > VoIP > Misc. > Ring Cadence Duration This field is used to limit the amount of times that the ring pattern will repeat itself. For example, if a ring pattern is set for 16 seconds a.
29 Home > VoIP > Misc. > Ring Default Rule Use this pull-down menu to select a Rin g Cad ence for the Ring Default Rule. The 8 different Ring Cadences can be configured on the Ring Cadence window. The Ring Default Rule is set for inbound callers that are not defined by the Ring Rule.
30 Home > VoIP > Misc. > Ring Rule From Use the From field to select either VoIP or PSTN. Port Use the Port field to select either Port 1 or Port 2. You can also choose both ports 1 and 2. Use this pull-down menu to select a Rin g Cad ence for the Ring Rule.
31 Home > VoIP > Manage Feat ures > Reject Incoming Call You can configure the router to reje ct in co ming calls from particular telephone nu mbers by entering the telephone number in the screen sho wn below. Name Enter a nam e to identify the current entry.
32 Home > VoIP > Manage F eatures > Block O utgoi ng Call You can configure the router to reje ct ou tgoing calls from parti cular telephone nu mbers by entering the telephone number in the screen sho wn below. Name Enter a nam e to identify the current entry.
33 Home > DHCP The next step is to set a range of IP addresse s that you wish to allot to the dev ices on your LAN by entering a S tarting IP Address and an Ending IP Address . This may be in a range from 2 to 254 (192.168.1.2 – 192. 16 8.1.254).
34 as HTTP or FTP. First, the user m ust enabl e the Static DHCP function by clicking the correspondin g Enabled radio button. Next the user must enter the host name and the IP address for that computer by entering the last numbers into the space provided in the IP Address field.
35 Home > Proxy DNS State Use this drop down menu to enable or disable the Proxy DNS. Proxy DNS IP Address Enter the IP Address of the Proxy DNS..
36 Advanced > Virtual Server To view the following window, cli ck o n the Advanced tab at the top of the window a nd then click the Virtual Serv er button to the left.
37 These external services may be modified by clicking i t s co rresponding edit ico n, or they may be deleted by clicking the correspo nding d elete icon. Though there are seve n fields available to configure the Virtual Server, in most cases, only the IP address of the Virtual Server will be needed for implementation.
38 Advanced > Filters Packet filtering is a basic security measure that shoul d be used on any network that is exposed to a security risk. A packet filter system examine s data packets and scrutini zes them in order to control network acce ss.
39 passed through the Router from either si de of the gateway. T he rules are created and controlled by the network a dmini strator and can be p re cisely defined . These rule s are used to block access to the LAN from outside the network and/or to deny acce ss to the WAN from within the network.
40 Protocol The protocol associated with this IP filter. The user may choo se between TCP , UDP or Both . IP Address An IP address or range of IP addresses that will be denied access to the Internet. Subnet Mask The subnet mask that corresp ond s to the IP address above.
41 Advanced > Firewall Pass or Block Select the action you want the f ilter to take when it finds a packet that meets the criteria entered below. Protocol The protocol associated with this IP filter. The user may choo se between TCP , UDP or Both .
42 Advanced > Routi ng > RIP Configuration LAN RIPv1 Select RIPv1 or RIPv2 for use by the router on your LAN. LAN RIPv2 Select RIPv1 or RIPv2 for use by the router on your LAN. WAN RIPv1 Select RIPv1 or RIPv2 for use by the router on the WAN. WAN RIPv2 Select RIPv1 or RIPv2 for use by the router on the WAN.
43 Advanced > Routi ng > Static Rout e IP Address Enter the IP Address of the sub net or device where packet s are to be routed. Subnet Mask Enter the subnet mask co rresp onding to the IP address entered above . Gateway Enter the IP address of the gatew ay used for packets that are to be routed to the IP address entered above.
44 Advanced > NAT > NAT C onfiguration NAT Interface IP Address This field displays the current IP address of the LAN side of the router. All IP address that are translated by the router will be in the same range as this IP address. NAT Interface Netmask This field displays the subnet mask corresponding to the IP address displ ayed above .
45 Advanced > NAT > Dynamic NAT Index This is an index number used to identify this NAT table entry . Global IP Start/End Enter the range of IP addresses that will be assigned to your Internet account by your ISP . Local IP Start/End Enter the range of IP addresses that you will assign to PCs on your LAN .
46 Advanced > NAT > Static NAT Index This is an index number that will be used to identify this NAT table entry . Local IP Address Enter the IP address of the PC on your LAN . Global IP Address Enter the IP address assi gned to your Internet account by your ISP .
47 Tools > Admin Web Port Number The port number used to access the Broadband Router. The default port number for web manageme nt is 80. WAN Access Control WAN access control allows remote management via the DI-6 24 to be configured from the Internet by a web bro wser.
48 Tools > System Backup Click Backup to backup the configuration file to your local hard drive. To restore the configu ration file click on Browse to search the local hard drive and locate the configuration file to be used for the configuration restorati on.
49 Tools > Firmware You can update both the software and firm wa re of the Router. Please check the D-Link Support site fo r firmware updates at http://support.dlink.com . You can download firmware upgrades to your hard drive fro m the D-Link suppo rt site.
50 Tools > SNMP Use SNMP to configure system features fo r proper operation, perfo rmance monitorin g, and detection of potential problems in the Router or n etwo r k. The SNMP IP Management Address is the address of the PC running the SNMP software from the DVG-1402S device.
51 Tools > Time The system time is the time used by the DVG-1402S for scheduling services. You can manually set the time, connect to a NTP (network time protocol) server or synchronize the time on the router with your PC. If an NTP server is set, you will only need to set the time zone (in the set up wizard).
52 Status > Device Info WAN IP Address : WAN/Public IP Address Subnet Mask : WAN/Public Subnet Mask Default Gateway : WAN/Public Gateway IP Address LAN LAN MAC Address : MAC address of the DVG-1402.
53 Status > Stats The Broadband Router ke eps a running log of events and activities occurring on the Router. If the device is rebooted, the logs ar e automatically cleared. You may save the l og fil es u nde r Lo g Se tti ngs . The screen above displa ys the Traffic Statistics.
54 Status > Diagnostics The Diagnostics window allows users to test the functionality of the router by executing a ping test. Enter the IP address of the Ping Target and then click Test .
55 Help The Help tab will give basic information referring to various screens locted in the Router. To view a specific section, click on its h yperlinked name.
56 Technical Specifications Standards IEEE 802.3 IEEE 802.3u VPN Pass Through/ Multi-Sessions PPTP L2TP I PSec Device Management Web-Based- Internet Explorer v6 or later; Netsc.
57 Technical Specifications LEDs: Power WAN LAN (10/100) Phone Status Physical Dimensions: L = 7.56 inches (192mm) W = 4.65 inches (118mm) H = 1.22 inches (31 mm) Power Input: Ext. Power Supply DC 12V, 1.5A Weight: 10.
58 Technical Support You can find software updates an d user docu mentation on the D-Link website. D-Link provides free technical supp ort for customers within the Unit ed States and within Canada for the duration of t he warra nty period o n this product.
Ein wichtiger Punkt beim Kauf des Geräts D-Link DVG-1402S (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie D-Link DVG-1402S noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für D-Link DVG-1402S - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von D-Link DVG-1402S reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über D-Link DVG-1402S erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon D-Link DVG-1402S besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von D-Link DVG-1402S verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit D-Link DVG-1402S. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei D-Link DVG-1402S gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
