Benutzeranleitung / Produktwartung LCD1105A des Produzenten Curtis
Zur Seite of 21
LCD Color digital TV receiver LCD1105A Operation Instruction NOTE: THIS UNIT IS NOT MEANT TO BE USED IN A MOVING VEHICLE. ATSC DIGIT AL TUNERS DOES NOT RECEIVE SIGNAL WHEN IN MOTION.
Contents I Precautions II Accessories III Appearance IV Description of Panel Buttons V Remote Controller Directions VI Basic Operation VII TV Menu Operation 6.1. TV/AV Image Quality Adjustment 6.2. Sound Adjustment 6.3. Time Adjustment 6.4. Settings 6.
I Precautions 1. Keep this product away from extremely hot or cold places. The storage temperature ranges from -40 to 60 and the working temperature from -5 to 40 . 2. Do not use this product at damp environment like bathtubs, wash basins, kitchens, washtubs, as well as basements, swimming pools or similar places.
* Open the package and make sure all the items are included. II Accessories 1. Car adapter 2. AC adapter 3. A V conversion cable 4. Remote control 5. AAA type batteries 6.
III Appearance -3- 1. Loudspeaker 2. TFT-LCD Screen 3. Control Panel 4. Remote-control receive window 5. Power indicator Red: Standby Green: Power-on 6.
IV Description of Panel Buttons 1. MENU: Menu button, press to show the main menu. When system enters a multilevel submenu, press to return the previous menu step by step. 2. CH+ : Upward selection/Channel increasing. 3. CH- : Downward selection/Channel decreasing.
V Remote Controller Operation Instruction -5- 1 2 4 8 9 11 12 13 14 15 16 17 18 3 10 AAA AAA 1. CH+/CH- (Program choosing key, up and down direction key): Press CH+ key to increase the channel by degree. Press this key and choose menu upward if it is in the system menu.
-6- 9. MENU: Menu key. When you press this key , the main menu will display. When the system enters a multilevel submenu, press this key and return to previous menu step by step. 10. PRLIST : TV program menu key. When pres sing this key, you will see the entire program list in a program list box.
VI Basic Operation 2. Connection Of External Antenna: Align one end of the attached external antenna cord plug with the external antenna jack, and the other end to connect the external antenna head. AV transforming wire 1. Connection of Power Supply: Align the power supply plug on AC adapter with the jack on the machine rear cover marked with DC.
VII TV Menu Operation -8- 1. There are four options of picture mode, which are Personal, Standard, Dynamic and Soft. 2. Contrast: Adjust the black and white contrast of the image 3. Brightness: Adjust the brightness of the image 4. Color: Adjust the color of the image 5.
1. There are four options of sound mode, which are Personal, Standard, Movie and Music. 2. Bass: Adjust bourdon. 3. Treble: Adjust alt. 4. Balance adjust the balance between left and right sound track. 5. Audio Language can be setup as English, and Spanish.
7.4.1. OSD Language Settings Press Up and Down Key to choose Language, and press Left and Right Key to choose among English, French and Spanish. 7.4.2. Menu State Settings Press UP and Down Key to choose Transparency , and press Left and Right Key to choose Off (menu transparency off) or On (menu transparency on).
-11- 7.4.5. Closed Caption Settings Many TV programs contain closed caption information, and the audience can see the caption in words on the screen. Not all the channels at any time have closed caption code information. Press Up and Down Key to choose Closed Caption and press Left and Right Key to enter the following picture.
UP/DOWN ADJUST "MENU": EXIT AUTO Cable System Start to Scan UP/DOWN ADJUST "MENU": EXIT Antenna CA TV Auto Scan Channel No. Channel Lable UP/DOWN ADJUST "MENU": EXIT Auto Scan Channel Lable Antenna Air Channel No. 4-1 7.5.
UP/DOWN ADJUST "MENU": EXIT AUTO Cable System Start to Scan 7.5.2. In the Start to scan item, press VOL+ to start searching. Auto searching will clear the primary program.
UP/DOWN ADJUST "MENU": EXIT Press VOL+ or VOL- to change current channel number. 7.5.6. Change or Edit Program Name Choose Channel Label and press VOL+ to enter the following picture. Press UP and Down key to alter the characters and numbers in the box to change the program name according to your preference as in the following picture.
VIII T o Receive Clear Image Adjust the length, angle and direction of the telescopic antenna to receive the optimal image. Draw back the antenna beginning from the wide part after using.
IX Before Repair The following phenomenons do not mean that the TV set has fault. Please check it according to the following methods before repair. Phenomenon Reason No image and sound AC adapter or automobile adapter connecting improperly; using unauthorized power; the power switch is on the state of off.
Input ATSC frequency: 54MHz 803MHz NTSC receiving frequency: 55.25MHz 801.25MHz LCD Screen Technical Parameter LCD screen: 11 inch LCD screen scale: 16:9 Resolution: 800(H) RGB 480(V) Response Rate: R.
XI Stand Assemble Instruction Manual -18- Pict.-9 Pict.-10 Pict.-11 Pict.-12 Pict.-13 Pict.-14 Pict.-15 Pict.-8 Pict.-7 Pict.-5 Pict.-6 Pict.-1 Pict.-2 Pict.-3 Pict.-4 Step one: Pick up the stand accessory from the package as Pict.-1. Step two: T ake out the rectangle patch from the stand haead as Pict.
Warning This operation instruction is only intended for reference. No further notice is available to any modification of all information contained therein. Due to continuing improvements, the features and design are subject to change without notice. Warning There is no component that can be repaired in the TV set.
Ein wichtiger Punkt beim Kauf des Geräts Curtis LCD1105A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Curtis LCD1105A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Curtis LCD1105A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Curtis LCD1105A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Curtis LCD1105A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Curtis LCD1105A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Curtis LCD1105A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Curtis LCD1105A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Curtis LCD1105A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
