Benutzeranleitung / Produktwartung CEN-UPS1250 des Produzenten Crestron electronic
Zur Seite of 40
Crestron CEN-UPS1250 Uninterruptible Power Supply Operations & Installation Guide.
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, pr oduct names and tradem arks are the proper ty of their respective owners.
Crestron CEN-UPS1250 Uninterruptible Power Supply Safety Information Read this manual Read all of the safety and operati ng instru ctions before inst alling and operating thi s device. Keep this manual Retain this manual and all of the safety in formation that came with this device.
Uninterruptible Power Supply Crestron CEN-UPS1250 Other Grounding This device provides a grounding lug on the rear panel for grounding the device to an external transient volt age surge suppression (TVSS) device. Ensure these ground connections are made in accordance with the instructions provided with the TVSS device.
Crestron CEN-UPS1250 Uninterruptible Power Supply Contents Safety Info rmation ............................................................................................................. ......... i Uninterruptible Power Supply: CEN-UPS1250 1 Introduc tion .
.
Crestron CEN-UPS1250 Uninterruptible Power Supply Uninterruptible Power Supply: CEN-UPS1250 Introduction Features and Functions • UPS and power conditioning – Engineered by APC ® • 2-Series con.
Uninterruptible Power Supply Crestron CEN-UPS1250 if excessive line noise or dist ortion is detected, ensuring opt imum performance of sensitive video and audio equipment dur ing momentary power glitches. When running on battery backup, the CEN-UPS1250 can power a rack ful l of equipment for several minutes wit hout interruption.
Crestron CEN-UPS1250 Uninterruptible Power Supply RoomView ® and Control System Integration Monitoring and operati on of the CEN-UPS1250 extends beyond i ts front panel, providing direct com municati on with Crestron’s Room View Rem ote Asset Management Soft ware as well as with Ethernet enable d 2-Series control system s.
Uninterruptible Power Supply Crestron CEN-UPS1250 CEN-UPS1250 Specifications (Continued) SPECIFICATION DETAILS Battery Internal Battery (4) 12 Volt, 9 Ah maintenance free sealed lead acid w/suspended electroly te, Crestron model CEN-UPS1250-BTP included Backup Runtime ~12 minutes @ half load (625 W), ~2.
Crestron CEN-UPS1250 Uninterruptible Power Supply Physical Description This section provides inform ation on the connecti ons, controls and indicators available on your C EN-UPS1250. CEN-UPS1250 Front View CEN-UPS1250 Rear View Operations & Installation Guide – DOC.
Uninterruptible Power Supply Crestron CEN-UPS1250 CEN-UPS1250 Overall Dimensions (Front and Top Views) 17.02 in (43.22 cm) 19.73 in (50.10 cm) 19.11 in (48.53 cm) 5.54 in (14.06 cm) 1 2 3 4 56 7 9 10 11 12 13 8 6 • Uninterruptible Power Supply: CEN-UPS1250 Operations & Installa tion Guide – DOC.
Crestron CEN-UPS1250 Uninterruptible Power Supply CEN-UPS1250 Overall Dime nsions (Rear View) 16 17 18 19 14 15 20 21 22 23 24 25 26 27 Connectors, Controls & Indicators # CONNECTORS, CONTROLS & INDICATORS DESCRIPTION 1 ON LINE LED (1 green) Indicates a working connection to the control system.
Uninterruptible Power Supply Crestron CEN-UPS1250 Connectors, Controls & Indicators (Continued) # CONNECTORS, CONTROLS & INDICATORS DESCRIPTION 13 FILTERING LED (1 green) Indicates the EMI and RFI noise reduction circuit is active.
Crestron CEN-UPS1250 Uninterruptible Power Supply Connectors, Controls & Indicators (Continued) # CONNECTORS, CONTROLS & INDICATORS DESCRIPTION 21 TELC O IN – (1) 4-pin RJ-11 female; Dual line telephone connection. OUT – (2) 4-pin RJ-11 female; Protected dual line telephone/modem device connection.
Uninterruptible Power Supply Crestron CEN-UPS1250 Industry Compliance This unit has been manufactured to comply with the following Stand ards for Safety in the United States, Ca nada and Mexico. NOTE: This device complies with part 15 o f the FCC rules.
Crestron CEN-UPS1250 Uninterruptible Power Supply Setup Ethernet Unlike other Crestron network devices, t he CEN-UPS1250 does not use Cresnet for comm unications between the device and the control system. The CE N-UPS1250 requires the use of a high-speed Ethernet connection for cont rol system comm unications.
Uninterruptible Power Supply Crestron CEN-UPS1250 by firml y grasping both sides of the unit in the middle. Fai lure to comply may result in personal injury and/or dam age to the equipm ent. WARNING: The CEN-UPS1250 should not be lift ed or moved using t he two handles on the front panel.
Crestron CEN-UPS1250 Uninterruptible Power Supply NOTE: Reliable earthing of rack-m ounted equipm ent should be m aintained. Particular atte ntion should be given to supply connections other t han direct connections to the branch circuit (e.g. use of power st rips).
Uninterruptible Power Supply Crestron CEN-UPS1250 Attaching Cleats and Rack Mount Ears Screws (6) #10-32 X ½" (2020254) Screws (4) #8-32 X 3/8" (2020252) Screws (8) #10-24 X 3/8" (2020.
Crestron CEN-UPS1250 Uninterruptible Power Supply Inserting and Connecting the Battery The CEN-UPS1250 is shipped with the i nternal battery pack di sconnected.
Uninterruptible Power Supply Crestron CEN-UPS1250 When making connections to t he CEN-UPS1250, consider that the included AC cable cannot be extended. Hardware Connections for the CEN-UPS1250 INPUT 12.
Crestron CEN-UPS1250 Uninterruptible Power Supply Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be vi ewed in the Online Help section of the Crestron website .
Uninterruptible Power Supply Crestron CEN-UPS1250 Locating the CEN-UPS1250 in the Device Library • The system tree of the control system displays the device in the appropri ate slot with a default IP ID as shown in the following illustratio n.
Crestron CEN-UPS1250 Uninterruptible Power Supply “CEN-UPS1250 Device Settings” Window • The ID code specified in the SIMPL Windows program m ust ma tch the IP ID of each unit.
Uninterruptible Power Supply Crestron CEN-UPS1250 Uploading and Upgrading Crestron recomme nds using the latest pr ogramm ing software and that each device contains the latest firmware to take advantage of the m ost recently released features. However, before attempting to upload or upgrade it is necessary to establish comm unication.
Crestron CEN-UPS1250 Uninterruptible Power Supply • Enter the IP address, IP mask and defaul t router of the CEN-UPS1250 via the Crestron Toolbox ( Functions | Ethernet Addressing ); otherwise enable DHCP. • Confirm Ethernet connections between CEN-UPS1250 and PC.
Uninterruptible Power Supply Crestron CEN-UPS1250 Operation Performing the System Test Before connecting equipm ent to the CEN-UPS1250, ensure the uni t is functional by connecting the AC power cord provided wit h the unit to the AC power connector on the rear panel and then to an AC outlet.
Crestron CEN-UPS1250 Uninterruptible Power Supply “SELFTEST IS ON…; ON-LINE SELFTEST” Screen SELFTEST IS ON… ON-LINE SELFTEST The “SELFTEST IS ON; ON-BATTERY SELFTEST” screen indicates the.
Uninterruptible Power Supply Crestron CEN-UPS1250 Status and Informational Screens The following paragraphs describe the various status and inform ational screens that are available with the CDN-UPS1250. These are accessed by using the STATUS button on the front panel.
Crestron CEN-UPS1250 Uninterruptible Power Supply connected to the un it. Loads of less than 5 % of rates load (63 W atts) will be displayed as <5%.
Uninterruptible Power Supply Crestron CEN-UPS1250 “BANK3 (ANALOG):ON; BANK4 (HI AMP):ON” Screen BANK3 (ANALOG):ON BANK4 (HI AMP):ON The model num ber and serial number screen di splays inform ation about your CEN-UPS1250. “MODEL #; S/N” Screen MODEL#:CEN-UPS 1250 S/N:PB0707130791 The “ENV.
Crestron CEN-UPS1250 Uninterruptible Power Supply 10. Battery Replacement Date 11. Do Quick Selftest 12. Do Runti me Calc ulation 13. Display Beep Test 14. Screen Saver On/Off 15. Reset To Default AUDIBLE ALARM setting – When the alarm is set to ON, it indicates an abnormal condition with the power or uni t.
Uninterruptible Power Supply Crestron CEN-UPS1250 “DISPLAY DIMMER” Screen DISPLAY DIMMER:HIGH PRESS TO CHANGE LED DIMMER setti ng – This screen lets you set a bri ghtness level of HIGH, LOW or OFF for the front panel LED indicators. Press t he up/down arrow buttons to set the brightness level of the LEDs.
Crestron CEN-UPS1250 Uninterruptible Power Supply “OUTLET DELAY2” Screen OUTLET DELAY2:5SEC PRESS TO CHANGE LOWBATWARNING setting – This screen lets y ou set the unit to sound an alarm and illum.
Uninterruptible Power Supply Crestron CEN-UPS1250 “DO RUNTIME CAL” Screen DO RUNTIME CAL:NO PRESS TO CHANGE DISPLAY-BEEP TEST setting – This function allows you to force the un it to perform display and beep tests. Sim ply press either the up or down arrow butt on.
Crestron CEN-UPS1250 Uninterruptible Power Supply Problem Solving Troubleshooting The following table provides correct ive action for possible troubl e situations. If further assistance is required, please contact a Crestron customer service representative.
Uninterruptible Power Supply Crestron CEN-UPS1250 Reference Documents The latest version of all documents m entioned withi n the guide can be obtained from the Crestron website ( www.crestron.com/manuals ). This link will provide a list of product manuals arranged in alphabetical order by model num ber.
Crestron CEN-UPS1250 Uninterruptible Power Supply Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise m ay be returned for credit, exchange or service without prior authori zation from CRESTR ON. To obtain warranty service for CR ESTRON products, contact an authorized CRESTRON dealer.
Crestron Electronics, Inc. Operations & Installation Guide – DOC. 6635A 15 Volvo Drive Rockleigh, NJ 07647 (2019504) Tel: 888.CRESTRON 01.08 Fax: 201.
Ein wichtiger Punkt beim Kauf des Geräts Crestron electronic CEN-UPS1250 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Crestron electronic CEN-UPS1250 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Crestron electronic CEN-UPS1250 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Crestron electronic CEN-UPS1250 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Crestron electronic CEN-UPS1250 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Crestron electronic CEN-UPS1250 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Crestron electronic CEN-UPS1250 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Crestron electronic CEN-UPS1250. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Crestron electronic CEN-UPS1250 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
