Benutzeranleitung / Produktwartung 486.245071 des Produzenten Craftsman
Zur Seite of 28
Operator's Manual Model No. 486.245071 ® PRINTED IN U .S.A. FORM NO . 40509 (09/19/07) Sears, Roeb uc k and Co ., Hoffman Estates, IL 60179 U .S.A. www .sears.com/craftsman CA UTION: Bef ore using this product, read this manual and f ollow all Saf ety Rules and Operating Instructions.
2 T ABLE OF CONTENTS MODEL NUMBER: 486.245071 SERIAL NUMBER: __________________ D A TE OF PURCHASE: __________________ The model number and ser ial numbers will be f ound on a decal attached to the Y ard V ac. Y ou should record both the ser ial number and the date of purchase and keep in a saf e place for future ref erence.
3 SAFETY Any pow er equipment can cause injur y if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using po wer equipment. Read and f ollow all instructions in this manual bef ore • attempting to assemble or oper ate this equipment.
4 W ARNING T O A V OID SERIOUS INJUR Y Read Owner’ s Manual and all saf ety labels on machine bef ore star ting and using machine. • Do Not remov e top cover or attempt to empty contents of cart while engine is r unning. • Do Not stand behind car t in exhaust discharge area while engine is running.
5 The Hand W and Attachment, Model 486.24509 provides a 12' x 5" diameter hose to clean around shrubs, patios, windo w wells and other areas not accessible to the tr actor . A CCESSORIES AND A TT A CHMENTS These accessories were av ailable when the unit w as purchased.
6 FULL SIZE HARD W ARE CHART (Cart) REF . QTY . DESCRIPTION A 1 He x Bolt, 5/16-18 x 4" B 5 He x Bolt, 3/8-16 x 3" C 4 Hex Bolt, 3/8-16 x 1" D 4 Hex Bolt, 1/4-20 x 1" E 2 Cotter Pi.
7 FULL SIZE HARD W ARE CHART (Adapter) REF . QTY . DESCRIPTION A 2 He x Bolt, 1/4-20 x 1-1/4" B 2 He x Bolt, 5/16-18 x 1-1/4" C 4 Hex Bolt, 1/4-20 x 3/4" D 2 Carr iage Bolt, 5/16-18 x 3/4" E 3 W asher , 1/4" Standard F 3 Nylock Nut, 5/16-18 G 6 Nyloc k Nut, 1/4-20 REF .
8 CAR T ON CONTENTS REF . QTY . DESCRIPTION 1 1 Car t T ra y 2 1 Cov er 3 1 Engine 4 1 Hose Adapter 5 1 Rope 6 1 F ront T ongue 7 1 Rear T ongue 8 1 Elbow w/ Deector 9 2 Hose Clamp 10 2 Wheel 11 1 Wheel Suppor t 12 1 Hose 13 1 Hitch Plate 14 2 Brace REF .
9 ASSEMBL Y Assemble latch le ver to rear tongue using 5/16" x 4" • he x bolt and 5/16" lock nut. Tighten nut until snug against side of rear tongue . See gure 1A. Attach the spring to the hole in the latch lock le ver • and the hole in the tongue.
10 Secure latch stand brac ket underneath the latch lock • le ver . See gure 5. Assemble the cart tray , car t bed braces and wheel • suppor t together using eight 5/16" truss head bolts and 5/16" nyloc k nuts. Tighten nuts after all bolts are in place.
11 3/8" x 1" HEX BOL T 3/8" x 3" HEX BOL T 3/8" NYLOCK NUT HOSE HANGER ROD Attach the engine mounting plate to the tongues • using two 3/8" x 3" he x bolts in the back holes , two 3/8" x 1" he x bolts in the front holes and four 3/8" nyloc k nuts.
12 TRA CT OR HITCH FRAME (SQU ARE) HITCH PLA TE TRA CT OR HITCH FRAME (T APERED) 1/2" x 1-1/2" HEX BOL T 7/16" FLA T W ASHER 1/2" LOCK NUT AT TA C H MO W -N-V AC HERE FIGURE 13 25" T ARP STRAP HOSE HANGER ROD FIGURE 12 Loop the 25" tar p strap under the hose .
13 BEND CART CO VER SUPPORT R OD ROPE 1/4" x 1-1/4" HEX BOL T 1/4" LOCK NUT FIGURE 16 FIGURE 17 Slide the second low er suppor t rod through outer • edge of the car t cov er . Slide an end of the rope onto the rod end as it approaches each gap in edge.
14 1/4" x 1-1/4" HEX BOL T 1/4" LOCK NUT 1/4" x 3/4" HEX BOL T 1/4" LOCK NUT LO WER R OD (BENT) FIGURE 20 FIGURE 19 Attach the last low er suppor t rod to the • outside of the top angle suppor t using two 1/4" x 3/4" he x bolts and 1/4" lock n uts.
15 SECURE ROPE 2ND LO WER SUPPORT R OD LOCK/UNLOCK LANY ARD • Secure rope around bottom of car t. Use the lanyard to tighten rope until it r mly secures the car t cov er to the car t. See gure 22. • Ensure lany ard is lock ed to keep rope in place .
16 FIGURE 24 Holding the adapter brac ket and the dec k adapter • together , position the deck adapter on the mower deck. Keeping the edge of dec k adapter as close as possible to the offset in t.
17 Assemble the adapter br ack et to the deck using tw o • 5/16" x 1-1/4" he x bolts, 5/16" at washers and 5/16" nyloc k nuts. See gure 26. NO TE: It ma y be necessar y to use e xtra 5/16" at washers to shim under the brac k et next to the dec k surf ace.
18 LA TCH LOCK LEVER Locks the car t bed down to the tongue. Releases to allow cart to be tipped back f or dumping. THRO TTLE CONTROL Controls speed of engine. BOO T Connects the plastic elbow to the f abr ic top , directing discharged material into the car t.
19 HO W T O USE Y OUR V A C SYSTEM HO W T O ST ART Y OUR V A C SYSTEM Check oil and gas in V ac engine. • Attach spark plug wire to spar k plug. • Mov e choke le ver on engine to CHOKE position. • (A warm engine may not require choking.
20 MAINTENANCE Ser vice Dates Check for loose f asteners X Check cov er X Check tire pressure X Check engine oil lev el X Lubr icate X Clean X X Maintain engine per instr uctions below and in engine manual.
21 PROBLEM POSSIBLE CA USE(S) CORRECTIVE A CTION Engine f ails to star t 1. Spar k plug wire disconnected. 1. Connect wire to spar k plug. 2. Safety s witch not contacted. 2. Correctly install hose adapter nozzle. 3. Fuel tank empty , or stale fuel. 3.
22 6 19 28 7 19 20 17 9 6 10 12 27 5 3 2 1 15 18 8 4 21 13 26 23 23 14 16 22 11 25 25 24 23 REP AIR P AR TS LIST FOR 486.245071 MONSTER V A C.
23 REP AIR P AR TS LIST FOR 486.245071 MONSTER V A C REF . NO . P ART NO . QTY . DESCRIPTION 1 48791 1 Car t T ra y 2 43088 4 W asher , 1/4" Std. 3 43012 4 He x Bolt, 1/4-20 x 3/4" 4 24386 1.
24 40 1 17 23 23 14 11 5 8 13 8 13 13 8 27 27 27 27 27 25 25 25 25 31 31 31 12 12 12 34 32 33 34 35 41 36 AD APTER #62468 13 20 21 42 25 25 4 4 37 3 19 18 12 42 18 18 13 25 25 19 19 3 2 42 18 6 16 15 9 8 39 7 43 27 13 29 30 26 28 TO TRA CT OR 24 44 38 39 REP AIR P AR TS FOR MODEL 486.
25 REF . NO . P ART NO . QTY . DESCRIPTION 1 25869 1 T op Suppor t Angle 2 25874 1 F ront Suppor t T ube 3 25876 2 Brace 4 49873 2 Lower Suppor t Rod 5 43840 2 Hex Bolt, 5/16-18 x 1-1/4" 6 49874 1 Car t Co ver 7 1263020127E1 1 Engine, 5.
26 REF . NO . P ART NO . QTY . DESCRIPTION 1 629-0241A 1 Har ness, Wire 2 24634 1 Housing Assembly , Inner 3 24633 1 Housing Assembly , Outer 4 43182 10 Hex Bolt, 5/16-18 x 3/4" 5 40320 4 He x Bo.
27 WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face. Do not operate on slopes greater than 10 degrees. Make turns gradually to prevent tipping or loss of control. Exercise extreme caution when changing direction on slopes.
® Regist ered Tradema rk / TM Trademark / SM Service Mark of Sears Brands , LLC ® Marca Registr ada / TM Mar ca de Fábrica / SM Marca de Serv icio de Sears Br ands, LLC MC Marque de commerce / MD M.
Ein wichtiger Punkt beim Kauf des Geräts Craftsman 486.245071 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Craftsman 486.245071 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Craftsman 486.245071 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Craftsman 486.245071 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Craftsman 486.245071 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Craftsman 486.245071 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Craftsman 486.245071 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Craftsman 486.245071. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Craftsman 486.245071 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
