Benutzeranleitung / Produktwartung 16700B des Produzenten Agilent Technologies
Zur Seite of 150
Agilent T echnologies 16700B-Series Logic Analysis Systems Installation Guide Publication nu mber 16700- 97023 Novembe r 2002 For S afet y info rmati on a nd Regu lato ry inf ormat ion, see th e pag es beh ind t he inde x.
2 Installation at a Glance 16700 B Over view Additi onal Conn ection s 16700B Mainframe Power Cable If o rder ed: Keyb oard Trai ning Board & Kit & Mouse Mon ito r Mon ito r C abl e Monit or P.
3 16702 B Over view Additional Co nnections 16702B Power Cable Training Board Keyboard Mainframe & Mou se & Kit Prin ter & Ordera ble: Monitor Monitor Ca ble Monitor Power Cable Cable 1670.
4.
Contents 5 Installation at a Glance 1 General I nformation 9 To l ocate informa tion on u sing t he log ic anal yzer 10 To l ocate specif icatio ns and cha racter istic s 11 To cr eate a back up file .
6 Contents Software Require ments 46 16517/18A Logic Analy zer (2-card m odule) 4 7 16517/18A Logic Analy zer (3-card m odule) 4 8 16517/18A Logic Analy zer (4-card m odule) 4 9 16517/18A Logic Analy .
Contents 7 Measurement Modules 71 16533/34 A Oscillosco pe Modul e (single or multi-ca rd module s) 72 5 Installing Pat tern Generator Measurement Modules 87 Software Require ments 88 16522A Patt ern .
8 Contents 100-pin D ifferential P robe (E5379 A for analyz ers with 90- pin pod connectors ) 107 38-pin Si ngle-ended Probe (E5 380A for a nalyzers wit h 90-pin p od connectors ) 108 Half-chan nel Ad.
9 1 General Infor mation.
10 Chapter 1: General Informati on T o locat e inform ation on using the logi c analyz er T o locate information on using the logic analyzer G o to o n - li n e h el p f o r i n f o r m a t i o n o n u s i n g y o ur l og i c a n a l yz e r.
11 Chapter 1: General In formation T o locate specificatio ns and characteristics T o locate speci fications and chara cteristics The sp ecifi catio ns and charac teris tics fo r you r instr umen t and m easurem ent modu le are in the on-li ne He lp. 1 Select Help i n the upper rig ht corner of the screen and the n select On Main Sy stem.
12 Chapter 1: General Informati on T o locate specifications an d characteristics 3 Under Interface Reference, select Specifications and Characteristics.
13 Chapter 1: General In formation T o create a backup file of your sy stem setting s and licen se passwords T o create a backup file of your system settings and license passwords By savi ng your sy s.
14 Chapter 1: General Informati on T o create a backup file o f your sy stem se ttings and license passwor ds 4 Select Flexible D isk or a Mo unted Directory and then select OK.
15 Chapter 1: General In formation T o reload sy stem settings an d license passwor ds T o reload system setting s and license passwor ds 1 Insert the flexible disk or set u p a mounted dire ctory . 2 Select the T ools icon from the menu bar . 3 Go to the Admin tab and select Load.
16 Chapter 1: General Informati on T o reload sy stem settings an d license p asswords 4 Select Flexible D isk or Mo unted Directory and select OK. If an it e m is not val id , or wa s no t in it i al ly sa ve d to the fi le , th e se le c ti o n wi ll be gray ed out in the interf ace.
17 2 Connecting and C onfiguring Hardware.
18 Chapt er 2: Connect ing and Co nfig uring Har dware T o conn ect th e mous e, key boar d, and m onit or T o connect the m ouse, keyboard, a nd monitor The 1670 0B must have the sy stem mouse a nd keyboard connected fo r the sy st em to b oot up proper ly .
19 Chapt er 2: C onnec ting an d Co nfiguri ng Ha rdware T o configure a monitor for the 16700B 4 Allo w a min imum of 5 cm spa cing betw een ins trume nts for pro per cooling.
20 Chapt er 2: Connect ing and Co nfig uring Har dware T o configure a monitor fo r the 16700B 3 Immediately p ress the T AB k ey . Press once per second for approximately 3 0 seconds . The monitor dis play w ill ch ange on th e scree n ever y few s econds as the sy stem cyc les t hrough the mo nitor resolu tion choices.
21 Chapt er 2: C onnec ting an d Co nfiguri ng Ha rdware T o configure an optional monitor for the 16702B T o configure an optional monitor for the 1 6702B The inte rnal LCD displ ay is pre-conf igured fo r 800 x 600 at the factory .
22 Chapt er 2: Connect ing and Co nfig uring Har dware T o change monitors (16700B or 16702B ) 4 P r e s s E N T E R w h e n y o u s e e a c l e a r i m a g e t o s e l e c t y o u r m o n i t o r c h o i c e and type ‘ Y” to confirm .
23 Chapt er 2: C onnec ting an d Co nfiguri ng Ha rdware T o connec t to LAN 2 Go to the Help menu and select On Main Sy stem. 3 In the Help window select Sy stem Administration and then select Configuring the Network. Follo w the instructions on configuri ng the netw ork.
24 Chapt er 2: Connect ing and Co nfig uring Har dware T o connect a print er T o connect a printer 1 Connect the print er ca ble to the bac k of your 16700B or 16702B . 2 Select the T ools icon from the menu bar . 3 Go to the Admin. tab and select Printers.
25 Chapt er 2: C onnec ting an d Co nfiguri ng Ha rdware T o co nne ct a p rint er 4 If you are connecting a local printer , select Local, select your pri nter type, select OK, and then Close. 5 If you are connecting a n etwork printer , select Network, enter the printer name, server add ress, select t ype, select OK, and t hen Close.
26 Chapt er 2: Connect ing and Co nfig uring Har dware T o connect an external data drive (option 008) T o connect an external data drive (option 008 ) 1 Power up the data d rive. 2 Set the addre ss. a Unlock the dat a drive carrier . W ait until the drive stops spin ning and a “u” is di splayed as sho wn.
27 Chapt er 2: C onnec ting an d Co nfiguri ng Ha rdware T o conne ct an exte rnal data d rive (option 008) c Set the external data drive address to 3 or 4 using the alignment tool supplie d with the drive. T he rotating swi tch is located inside the carrier .
28 Chapt er 2: Connect ing and Co nfig uring Har dware T o connect an external data drive (option 008) 4 Connect the data drive to the SCSI-II port. 5 Power up the data drive, then the monitor , and then the sy stem (16700 B or 167 02B) . 6 Mount the disk.
29 Chapt er 2: C onnec ting an d Co nfiguri ng Ha rdware T o conne ct an exte rnal data d rive (option 008) b Go to the Adm in. tab and selec t Mount External Disk .
30 Chapt er 2: Connect ing and Co nfig uring Har dware T o disconnect an external data drive (option 008) T o disconnect an external data drive (option 008 ) It i s imp ort ant t hat you u nmou nt the d isk befo re tu rni ng t he s y stem o ff. 1 Select the T ools icon from the menu bar .
31 Chapt er 2: C onnec ting an d Co nfiguri ng Ha rdware T o connect a remo vable boot drive (option 009) 3 T urn the power off on the sy stem, then the monitor , and then the data drive. T o connect a rem ovable boot drive (option 009) 1 Power up the bo ot drive.
32 Chapt er 2: Connect ing and Co nfig uring Har dware T o connect a removable boot drive (option 009) b Remove the boo t drive fro m the carrier . c Set the external boot drive addr ess to 6 using the alignment tool supplied with the dr ive. The ro tating switch is lo cated inside the carrier .
33 Chapt er 2: C onnec ting an d Co nfiguri ng Ha rdware T o connect a remo vable boot drive (option 009) 3 Power down the boot drive. 4 Connect the boot drive to the SCSI- II port. 5 Power up the bo ot drive, t hen the mon itor , and then the sy stem.
34 Chapt er 2: Connect ing and Co nfig uring Har dware T o disconnect a re movable b oot drive (op tion 009) T o disconnect a rem ovable boot drive (option 009) T urn the pow er off on th e sy stem, then the moni tor , and then t he boot dri ve.
35 Chapt er 2: C onnec ting an d Co nfiguri ng Ha rdware T o install software 2 Select the Software Install tab and then se lect Install. 3 Select the media type and select App ly .
36 Chapt er 2: Connect ing and Co nfig uring Har dware T o i nstall software 4 T o l oad Sy st em Software, highlight it and select Install. 5 T o load Additional T ools or Processor Suppo rt Software: a Double click to display the available p ackages.
37 Chapt er 2: C onnec ting an d Co nfiguri ng Ha rdware T o conn ect a 1670 1B expande r frame T o connect a 167 01B expander frame 1 Install your measurement modules in t he 16701B expander frame.
38 Chapt er 2: Connect ing and Co nfig uring Har dware T o connect multiple fra mes T o connect multiple frames As many as eight 16 700B’s and/or 1670 2B’s w ith expander frames ma y be connected togeth er . T o conne ct multi ple frame s you need to order 167 00B option #012 and/or 167 02B option #0 12.
39 Chapt er 2: C onnec ting an d Co nfiguri ng Ha rdware T o connect mult iple frames 7 Slide the bottom cover toward the r ear of the instrument and away .
40 Chapt er 2: Connect ing and Co nfig uring Har dware T o connect multiple fra mes 9 Insert the Multifr ame Module with the cable attached. 16700e24.c d r.
41 Chapt er 2: C onnec ting an d Co nfiguri ng Ha rdware T o connect mult iple frames 10 Connect the Mul tiframe Module cable to the connector on the bottom side of the I nterface Board, insert the screws and r eassemble the frame. 11 Connect main frame and e xpander frame s together .
42 Chapt er 2: Connect ing and Co nfig uring Har dware T o install, remove, or replac e measuremen t modules T o install, remove, or replace measu rement modules CAUTION: Electrostat ic disch arge can dam age e lectronic componen ts. Use grounde d wrist stra ps and m ats w hen p erform ing a ny ser vice to meas ureme nt modu les.
43 Chapt er 2: C onnec ting an d Co nfiguri ng Ha rdware T o install, remove, or replac e measuremen t modules 4 If you are inserting mor e than one modul e, the tighteni ng order is bottom modul e to top modul e. A single -module configur ation can be installed i n any available slo t.
44 Chapt er 2: Connect ing and Co nfig uring Har dware T o install, remove, or replac e measuremen t modules.
45 3 Installi ng Log ic Analy zer Measurement Modules.
46 Chapt er 3: Ins tallin g Logi c Analyz er Me asurem ent Mod ules Softw are Re quirem ents Software Requi rements The fo llow ing tab le gi ves yo u the softw are ve rsion requir ed i n your 1670 0A/B or 16702A/B mainframe for use with logic analyzer measurement modules.
47 Chapt er 3: Ins tall ing Logi c Analy zer Me asurem ent M odule s 16517/18A Logic Ana lyzer (2-card module) 16517/18A Logic Analyzer (2-c ard module) The 16517A is the maste r card and the 16518A is the expa nder card. Connect the ca rds t ogeth er i n one of t he tw o way s shown be low .
48 Chapt er 3: Ins tallin g Logi c Analyz er Me asurem ent Mod ules 16517/18A Logic Analyzer (3-car d module) 16517/18A Logic Analyzer (3-c ard module) The 1651 7A is the master card and the 1 6518A card s are expand er cards. Connec t the cards toget her in o ne of the three w ay s shown below .
49 Chapt er 3: Ins tall ing Logi c Analy zer Me asurem ent M odule s 16517/18A Logic Ana lyzer (4-card module) 16517/18A Logic Analyzer (4-c ard module) The 1651 7A is the master card and the 1 6518A card s are expand er cards. Connec t the cards toge ther in one of the two w ay s s hown b elow .
50 Chapt er 3: Ins tallin g Logi c Analyz er Me asurem ent Mod ules 16517/18A Logic Analyzer (5-car d module) 16517/18A Logic Analyzer (5-c ard module) The 1651 7A is the master card and the 1 6518A card s are expand er cards. Connect t he cards tog ether as shown b elow .
51 Chapt er 3: Ins tall ing Logi c Analy zer Me asurem ent M odule s 16557D Logic Ana lyzer (2-card module) 16557D Logic Analyzer (2-car d module) Use tw o 2 x 25 ca bles a nd two 2 x 10 ca bles t o co nnect the cards as sh own.
52 Chapt er 3: Ins tallin g Logi c Analyz er Me asurem ent Mod ules 16557D Logic Analyzer (3-card modu le) 16557D Logic Analyzer (3-car d module) Use two 2 x 25 cables and three 2 x 10 cables to connect the card s as shown.
53 Chapt er 3: Ins tall ing Logi c Analy zer Me asurem ent M odule s 16557D Logic Ana lyzer (3-card module) 16557D Logic Analyzer (3-car d module) Use two 2 x 25 cables and four 2 x 10 cables t o connect th e cards as shown.
54 Chapt er 3: Ins tallin g Logi c Analyz er Me asurem ent Mod ules 16557D Logic Analyzer (5-card modu le) 16557D Logic Analyzer (5-car d module) Use two 2 x 25 cables and five 2 x 10 cable s to connect t he cards as shown .
55 Chapt er 3: Ins tall ing Logi c Analy zer Me asurem ent M odule s 16710/11/12A Logic Ana lyzer (1-card module) 16710/11/ 12A Logic Analyzer ( 1-card module ) A singl e 16710/11/12A logic analy zer module will have the 2 x 40 cable conne cted in t he sin gle-ca rd c onfi gurati on.
56 Chapt er 3: Ins tallin g Logi c Analyz er Me asurem ent Mod ules 16710/11/12A Logic Analyzer (2-card module) 16710/11/ 12A Logic Analyzer ( 2-card module ) Connect t wo modules a s shown using two 2 x 25 cables and two 2 x 40 cables.
57 Chapt er 3: Ins tall ing Logi c Analy zer Me asurem ent M odule s 16715/16/17A, 16718/19A, 16740/41/42A, 16750/51/52A/B Logic Analyzer (1-card module) 16715/16/ 17A, 16718/ 19A, 16740/ 41/42A, 167 .
58 Chapt er 3: Ins tallin g Logi c Analyz er Me asurem ent Mod ules 16715/16/17A, 16718/19A, 16740/41/42A, 16750/51/52A/B Logic Analyzer (2-card module) 16715/16/ 17A, 16718/ 19A, 16740/ 41/42A, 167 50/51/52A/ B Logic A nalyzer (2- card module) Use two 2 x 1 0 cabl es and two 2 x 40 ca bles (i n the acces sory p ouch) to con nect the modu les.
59 Chapt er 3: Ins tall ing Logi c Analy zer Me asurem ent M odule s 16715/16/17A, 16718/19A, 16740/41/42A, 16750/51/52A/B Logic Analyzer (3-card module) 16715/16/ 17A, 16718/ 19A, 16740/ 41/42A, 167 50/51/52A/ B Logic A nalyzer (3- card module) Use th ree 2 x 10 cables and four 2 x 4 0 cabl es (in the access ory p ouch) t o con nect the modu les.
60 Chapt er 3: Ins tallin g Logi c Analyz er Me asurem ent Mod ules 16715/16/17A, 16718/19A, 16740/41/42A, 16750/51/52A/B Logic Analyzer (4-card module) 16715/16/ 17A, 16718/ 19A, 16740/ 41/42A, 167 50/51/52A/ B Logic A nalyzer (4- card module) Use four 2 x 10 ca bles and si x 2 x 40 cab les ( in the acce ssory p ouch ) to con nect the modu les.
61 Chapt er 3: Ins tall ing Logi c Analy zer Me asurem ent M odule s 16715/16/17A, 16718/19A, 16740/41/42A, 16750/51/52A/B Logic Analyzer (5-card module) 16715/16/ 17A, 16718/ 19A, 16740/ 41/42A, 167 .
62 Chapt er 3: Ins tallin g Logi c Analyz er Me asurem ent Mod ules 16753/54/55/56A Logic Analyzer (1-card module) 16753/54/ 55/56A Logic Analy zer (1-card m odule) Each card shi pped stan d-al one h as th e 2 x 1 5 cable conn ected in the s ingl e- card m odul e conf igura tion.
63 Chapt er 3: Ins tall ing Logi c Analy zer Me asurem ent M odule s 16753/54/55/56A Logic Ana lyzer (2-card module) 16753/54/ 55/56A Logic Analy zer (2-card m odule) Use two 2 x 15 cables and two 2 x 50 cables (in the accessory pouch) to con nect the modu les.
64 Chapt er 3: Ins tallin g Logi c Analyz er Me asurem ent Mod ules 16753/54/55/56A Logic Analyzer (3-card module) 16753/54/ 55/56A Logic Analy zer (3-card m odule) Use th ree 2 x 15 cables and four 2 x 5 0 cabl es (in the access ory pouch) t o con nect the modu les.
65 Chapt er 3: Ins tall ing Logi c Analy zer Me asurem ent M odule s 16753/54/55/56A Logic Ana lyzer (4-card module) 16753/54/ 55/56A Logic Analy zer (4-card m odule) Use four 2 x 15 ca ble s and si x 2 x 50 cab les (i n the access ory p ouch) to con nect the modu les.
66 Chapt er 3: Ins tallin g Logi c Analyz er Me asurem ent Mod ules 16753/54/55/56A Logic Analyzer (5-card module) 16753/54/ 55/56A Logic Analy zer (5-card m odule) Use five 2 x 15 cable s and eight 2.
67 Chapt er 3: Ins tall ing Logi c Analy zer Me asurem ent M odule s 16760A Logic Ana lyzer (1-card module) 16760A Logic Analyzer (1-card modul e) A single 16760 A logic analyzer module w ill have the 2 x 10 cable connected in the si ngle-card configur ation.
68 Chapt er 3: Ins tallin g Logi c Analyz er Me asurem ent Mod ules 16760A Logic Analyzer (3-card modu le) 16760A Logic Analyzer (3-card module) Use th ree 2 x 10 cables and four 2 x 4 0 cabl es (in the access ory pouch) t o con nect the modu les.
69 Chapt er 3: Ins tall ing Logi c Analy zer Me asurem ent M odule s 16760A Logic Ana lyzer (4-card module) 16760A Logic Analyzer (4-card modul e) Use four 2 x 10 ca ble s and si x 2 x 40 cab les (i n the access ory p ouch) to con nect the modu les.
70 Chapt er 3: Ins tallin g Logi c Analyz er Me asurem ent Mod ules 16760A Logic Analyzer (5-card modu le) 16760A Logic Analyzer (5-card module) Use five 2 x 10 cable s and eight 2 x 40 cab les ( in th e ac cesso ry po uch) to con nect the modu les.
71 4 Installi ng Oscillosco pe Measurement Modules.
72 Chapter 4: I nstalli ng Oscil loscop e Measurem ent Modul es 16533/34A Oscilloscope Mo dule (single or multi-c ard modules) 16533/34A Oscillosc ope Module ( single or mul ti-card modules) The Agilent T echnol ogies 16533A/34A oscilloscope module functions as either a mast er ca rd or exp ande r car d.
73 Chapter 4: I nstalli ng Oscill oscope Mea surement Modules 16533/34A Oscilloscope Module (single or multi-card modules) NOTE: If you calibrate a module wit hout unprote cting the memory , the new calibr atio n se ttings wi ll not be saved w hen t he sy stem is shut down.
74 Chapter 4: I nstalli ng Oscil loscop e Measurem ent Modul es 16533/34A Oscilloscope Mo dule (single or multi-c ard modules) 4 Power up the m onitor (if applicable) and then the sy stem. 5 For more accurate calibration, allow the sy stem 30 minutes to warm up.
75 Chapter 4: I nstalli ng Oscill oscope Mea surement Modules 16533/34A Oscilloscope Module (single or multi-card modules) Step 2 Perform ope rational accuracy ca libratio n 1 Connect the B NC T ee and the (equal length ) 5 0-ohm BNC cables to the module.
76 Chapter 4: I nstalli ng Oscil loscop e Measurem ent Modul es 16533/34A Oscilloscope Mo dule (single or multi-c ard modules) 3 In the Calibr ation window , select Default Factors.
77 Chapter 4: I nstalli ng Oscill oscope Mea surement Modules 16533/34A Oscilloscope Module (single or multi-card modules) A s o p e r a t i o n al ac c u r a c y ca l i b r a t i o n ru n s , me s s a g es ap p e a r in t h e m e s s ag e bo x on screen.
78 Chapter 4: I nstalli ng Oscil loscop e Measurem ent Modul es 16533/34A Oscilloscope Mo dule (single or multi-c ard modules) Step 3 Calibr ate a si ngle car d for external trigger skew 1 Connect a 9-inch 50-ohm BNC cable to one side of the BNC tee adapter .
79 Chapter 4: I nstalli ng Oscill oscope Mea surement Modules 16533/34A Oscilloscope Module (single or multi-card modules) 3 Select the R un icon and the instrument wi ll remind you to co nnect the cables. Select OK and wait f or the trigger skew cal ibration to complete.
80 Chapter 4: I nstalli ng Oscil loscop e Measurem ent Modul es 16533/34A Oscilloscope Mo dule (single or multi-c ard modules) 7 In the Logic Analy sis Sy stem window select File, then select Exit and OK to close the session . 8 In the Sessi on Manager windo w select Shutdown.
81 Chapter 4: I nstalli ng Oscill oscope Mea surement Modules 16533/34A Oscilloscope Module (single or multi-card modules) 10 If you are only calibrating o ne card set the PROTECTED/ UNPROTEC TED switch b ack to PROTECT ED. 11 For multi-card m odules, leave the switch set to UNPROTECTED and continue to Step 4 to perform r econfigur ation.
82 Chapter 4: I nstalli ng Oscil loscop e Measurem ent Modul es 16533/34A Oscilloscope Mo dule (single or multi-c ard modules) b Rep eat f or al l car ds in the modu le . Up to 4 ca rds may be co nfig ured on a single time base and trigger in a 16700 A, 16700B, 16 702A, or 16702B main frame 2 Reapply power to the 16700-ser ies mainf rame.
83 Chapter 4: I nstalli ng Oscill oscope Mea surement Modules 16533/34A Oscilloscope Module (single or multi-card modules) b Select the Proce dure field and then select Ext T rig Skew . c Select Run and the instr ument will r emind you to connect the cables.
84 Chapter 4: I nstalli ng Oscil loscop e Measurem ent Modul es 16533/34A Oscilloscope Mo dule (single or multi-c ard modules) d Select the Channels fi eld, select two channels to d eskew , select Run, and follo w the instruction s on the disp lay . e Repeat the channel ske w procedure until all channel combinations have been de skewed.
85 Chapter 4: I nstalli ng Oscill oscope Mea surement Modules 16533/34A Oscilloscope Module (single or multi-card modules) 7 In the Logic Analy sis Sy stem window select File, then select Exit and OK to close the session . 8 In the Sessi on Manager windo w select Shutdown.
86.
87 5 Installing Pattern G enerator Measurement Modules.
88 Chapter 5: Installin g Pattern Generator Mea surement Modules Softw are Re quirem ents Software Requi rements The fo llow ing tab le gi ves yo u the softw are ve rsion requir ed i n your 1670 0A/B or 16702A/B mainfram e f or use with pa ttern ge nerator measure ment modules.
89 Chapt er 5: In stalli ng Pat tern Ge nera tor Meas urem ent Mo dule s 16522A Pattern Generator (2-card module) 16522A Pa ttern Generator (2-card modul e) Use tw o 2 x 10 c ables to conn ect t he mod ule s as s hown .
90 Chapter 5: Installin g Pattern Generator Mea surement Modules 16522A Pattern Generator (4-card modu le) 16522A Pa ttern Generator (4-card modul e) NOTE: T urn off t he ma infr ame po wer be fore removi ng, repl acing, or insta lling modu les fol lowin g the proced ures o n pa ge 42.
91 Chapt er 5: In stalli ng Pat tern Ge nera tor Meas urem ent Mo dule s 16522A Pattern Generator (5-card module) 16522A Pa ttern Generator (5-card modul e) NOTE: T urn off t he main fram e pow er befo re re movi ng, re plac ing, or in stal ling modu les fol lowin g the proced ures on p age 4 2.
92 Chapter 5: Installin g Pattern Generator Mea surement Modules 16720A Pattern Generator (1-card modu le) 16720A Pa ttern Generator (1-card modul e) Each card shi pped stan d-al one h as th e 2 x 1 0 cable conn ected in the s ingl e- card modul e conf igura tion.
93 Chapt er 5: In stalli ng Pat tern Ge nera tor Meas urem ent Mo dule s 16720A Pattern Generator (3-card module) 16720A Pa ttern Generator (3-card modul e) Use th ree 2 x 10 c ables to co nnect the modul es. NOTE: T urn off t he main fram e pow er befo re re movi ng, re plac ing, or in stal ling modu les fol lowin g the proced ures on p age 4 2.
94 Chapter 5: Installin g Pattern Generator Mea surement Modules 16720A Pattern Generator (4-card modu le) 16720A Pa ttern Generator (4-card modul e) NOTE: T urn off t he ma infr ame po wer be fore removi ng, repl acing, or insta lling modu les fol lowin g the proced ures o n pa ge 42.
95 Chapt er 5: In stalli ng Pat tern Ge nera tor Meas urem ent Mo dule s 16720A Pattern Generator (5-card module) 16720A Pa ttern Generator (5-card modul e) NOTE: T urn off t he main fram e pow er befo re re movi ng, re plac ing, or in stal ling modu les fol lowin g the proced ures on p age 4 2.
96.
97 6 Connecting Accessories.
98 Chapte r 6: Conne cting Acce ssori es For More Information The f ollow ing s ect ions g ive yo u an o verv iew o f Agil ent T echn ologie s pro bes and tim e cor relatio n fix ture. More info rmation on p robin g opt ions ca n b e fou nd in a doc ument tit led Probing Solutions for Logic Analy sis Sy stems which you can download from www .
99 Chapte r 6: Connec ting Ac cessories Gene ral -purp ose pr obi ng General-purpos e probing NOTE: For all Agilent logic analyze rs except 16517A, 16518A, 16760A , and 16753/54/55/5 6A. Genera l-pu rpos e pro bing requir es c onnect ing probe leads to i ndi vidua l s ignal lines.
100 Chapte r 6: Conne cting Acce ssori es General -purpo se probing Connecting probe leads to the target. The s ignal and gro und le ads can b e conn ected dire ctly to the targ et sy stem. This requi res i nstall ing 0. 63 mm (0.025 inch) square pins, or round pins with a diameter between 0.
101 Chapte r 6: Connec ting Ac cessories Isolation adapter (Part number 01650-63203) Isolation adapter (Part nu mber 01 650-632 03) NOTE: For all Agilent logic analyze rs except 16517A, 16518A, 16760A , and 16753/54/55/5 6A.
102 Chapte r 6: Conne cting Acce ssori es Direct c onnec tion Direct connec tion NOTE: For all Agilent logic analyze rs except 16517A, 16518A, 16760A , and 16753/54/55/5 6A.
103 Chapte r 6: Connec ting Ac cessories 38-pin Low-voltage Probe (E5339A with tip isolation netwo rk) 38-pin Low-voltage P robe (E5339A with tip isolation network) NOTE: For all Agilent logic analyze rs except 16517A, 16518A, 16760A , and 16753/54/55/5 6A.
104 Chapte r 6: Conne cting Acce ssori es 38-pin Single-e nded Probe (E5346A for analyzers with 40-pin pod connectors) 38-pin Single-ended Probe (E5346A for an alyze rs with 40-pin pod connect ors) NOTE: For all Agilent logic analyze rs except 16517A, 16518A, 16760A , and 16753/54/55/5 6A.
105 Chapte r 6: Connec ting Ac cessories 38-pin Adapter Cable (E5351A no tip netwo rk) 38-pin Adapter C able ( E5351A no tip network) NOTE: For all Agilent logic analyze rs except 16517A, 16518A, 16760A , and 16753/54/55/5 6A.
106 Chapte r 6: Conne cting Acce ssori es 100-pin Single-e nded Probe (E5378A for analyzers with 90-pin pod connectors) 100-pin Single-ended Probe ( E5378 A for analyzer s with 90-pin pod connect ors) NOTE: For use with Agilent logic anal yzer modules 167 60A, 16753A, 16754 A, 16755A, and 167 56A.
107 Chapte r 6: Connec ting Ac cessories 100-pin Differ ential Probe (E 5379A for a nalyzers with 90-pin pod connec tors) 100-pin Diff erenti al Prob e (E53 79A for analy zers with 90 -pin pod connect ors) NOTE: For use with Agilent logic anal yzer modules 16760A , 16753A, 1675 4A, 16755A, and 167 56A.
108 Chapte r 6: Conne cting Acce ssori es 38-pin Single-e nded Probe (E5380A for analyzers with 90-pin pod connectors) 38-pin Single-ended Probe (E5380A for an alyze rs with 90-pin pod connect ors) NOTE: For use with Agilent logic anal yzer modules 167 60A, 16753A, 16754 A, 16755A, and 167 56A.
109 Chapte r 6: Connec ting Ac cessories Half-channel Adapter (E5386A) Half-channel Adapter (E 5386A ) NOTE: For use wit h Agil ent 16 760A lo gic an alyzers.
110 Chapte r 6: Conne cting Acce ssori es Single-ended Flying Lead Probe Set (E5382A) Single-ende d Flying Lead Probe Se t (E5382A) NOTE: For use with Agilent logic anal yzer modules 167 60A, 16753A, 16754 A, 16755A, and 167 56A.
111 Chapte r 6: Connec ting Ac cessories Soft T ouch Probes (E5387A and E5390A for a nalyzers with 90-pin po d connec tors) Soft T ouch Probes (E5387 A and E5390A for analyzer s with 90-pin pod connect ors) NOTE: For use with Agilent logic anal yzer modules 16760A , 16753A, 1675 4A, 16755A, and 167 56A.
112 Chapte r 6: Conne cting Acce ssori es Soft T ouch Probes (E5387A and E5390A for analyzers with 90-pin pod connectors) T ime Correlation Fixture (E5 850A) The Agi lent E5850A time correl ation fixtur e allows you to make ti me- correlated measureme nts betwee n a 16700 logi c analyzer and an Agilent 548XX seri es I nfini ium o scil losco pe.
113 7 T r oublesh ooting.
114 Chapter 7: T roubl eshooti ng T o run self-test s T o run se lf-tests 1 Select the T ools icon from the menu bar . 2 Select the Admin tab, select Self- T est, and r ead the text box befo re selecting Y es. 3 In the Self T est window select the Sy stem tab, select the Master or Expander Frame tab, and then select the module you want to test.
115 Chapter 7: T roubl eshootin g T o execute disaster rec overy proce dures T o execute disaster recovery procedure s CAUTION: Re ad this sect ion c aref ully befor e you at tempt t o rei nst all t he ope ratin g sy st em fro m the CD -ROM us ing thi s procedur e.
116 Chapter 7: T roubl eshooti ng T o execute disaster rec overy proce dures CD-ROM dr ive. T he dis play w ill th en show t he bo ot devi ces: Path Number Device Path Device Type ------------ ------------ ------------------ P0 SESCSI.6.0 IBM DNES-309170W P1 SESCSI.
Index 117 Numeri cs 16517/18A logic an alyzer module , 47 , 48 , 49 , 50 16522A pattern generator module , 88 , 89 , 90 , 91 16533/34A oscil loscope modul e , 72 (calibration) , 72 (multi card) , 81 (.
118 Index 16557D (5-card) , 54 16710/11/12A (1-card) , 55 16710/11/12A (2-card) , 56 16715/16/17A (1-card) , 57 16715/16/17A (2-card) , 58 16715/16/17A (3-card) , 59 16715/16/17A (4-card) , 60 16715/1.
Index 119 R recovering , 115 reinstalla tion , 11 5 removable boot drive connecting , 31 disconnecting , 34 removing measurement modules , 42 replacing measurement modules , 42 restoring , 115 run sel.
120.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manufa cture r’ s Na me: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definitions: Installation cate gory (overvoltage category ) I: Signal level, special equipme nt or parts of equi pment , telecomm unicat ion, elec tronic et c., with smaller tr ansien t overvo ltages than in stallat ion (ove rvoltage category) II.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manu facture r ’ s Name: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definitions: Installation cate gory (overvoltage category ) I: Signal level, special equipme nt or parts of equi pment , telecomm unicat ion, elec tronic et c., with smaller tr ansien t overvo ltages than in stallat ion (ove rvoltage category) II.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manu facture r ’ s Name: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definitions: Installation cate gory (overvoltage category ) I: Signal level, special equipme nt or parts of equi pment , telecomm unicat ion, elec tronic et c., with smaller tr ansien t overvo ltages than in stallat ion (ove rvoltage category) II.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manu facture r ’ s Name: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definitions: Installation cate gory (overvoltage category ) I: Signal level, special equipme nt or parts of equi pment , telecomm unicat ion, elec tronic et c., with smaller tr ansien t overvo ltages than in stallat ion (ove rvoltage category) II.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manu facture r ’ s Name: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definitions: Installation cate gory (overvoltage category ) I: Signal level, special equipme nt or parts of equi pment , telecomm unicat ion, elec tronic et c., with smaller tr ansien t overvo ltages than in stallat ion (ove rvoltage category) II.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manu facture r ’ s Name: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definitions: Installation cate gory (overvoltage category ) I: Signal level, special equipme nt or parts of equi pment , telecomm unicat ion, elec tronic et c., with smaller tr ansien t overvo ltages than in stallat ion (ove rvoltage category) II.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manu facture r ’ s Name: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definitions: Installation cate gory (overvoltage category ) I: Signal level, special equipme nt or parts of equi pment , telecomm unicat ion, elec tronic et c., with smaller tr ansien t overvo ltages than in stallat ion (ove rvoltage category) II.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manu facture r ’ s Name: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definitions: Installation cate gory (overvoltage category ) I: Signal level, special equipme nt or parts of equi pment , telecomm unicat ion, elec tronic et c., with smaller tr ansien t overvo ltages than in stallat ion (ove rvoltage category) II.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manu facture r ’ s Name: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definitions: Installation cate gory (overvoltage category ) I: Signal level, special equipme nt or parts of equi pment , telecomm unicat ion, elec tronic et c., with smaller tr ansien t overvo ltages than in stallat ion (ove rvoltage category) II.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manu facture r ’ s Name: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definitions: Installation cate gory (overvoltage category ) I: Signal level, special equipme nt or parts of equi pment , telecomm unicat ion, elec tronic et c., with smaller tr ansien t overvo ltages than in stallat ion (ove rvoltage category) II.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manu facture r ’ s Name: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definitions: Installation cate gory (overvoltage category ) I: Signal level, special equipme nt or parts of equi pment , telecomm unicat ion, elec tronic et c., with smaller tr ansien t overvo ltages than in stallat ion (ove rvoltage category) II.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manu facture r ’ s Name: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definitions: Installation cate gory (overvoltage category ) I: Signal level, special equipme nt or parts of equi pment , telecomm unicat ion, elec tronic et c., with smaller tr ansien t overvo ltages than in stallat ion (ove rvoltage category) II.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manu facture r ’ s Name: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definit ions : Instal latio n catego ry (ove rvoltag e cate gory) I: Sign al lev el, spec ial equi pment or parts of equipme nt, t eleco mmunicat ion, electr onic etc., with smalle r tra nsient overv oltage s th an insta llation (overvol tage ca tegory ) II.
DECLARA TION O F CONFORMITY Accord ing to ISO/I EC Guide 22 an d CEN/CENEL EC EN 45014 Manu facture r ’ s Name: Manu facture r ’ s Addre ss: Agil ent Tech nologi es, Inc.
Produc t Regul ations Definitions: Installation cate gory (overvoltage category ) I: Signal level, special equipme nt or parts of equi pment , telecomm unicat ion, elec tronic et c., with smaller tr ansien t overvo ltages than in stallat ion (ove rvoltage category) II.
Agilent T echn ologies Inc. P .O. Box 2197 1900 Gard en of the Gods Road Colo rado Spr ings, CO 8 0901-21 97, U.S.A. Safety Notices This apparat us has bee n designed and tested in acc or- dance with IEC Public ation 1010, Safe ty Requ ir emen ts for Me a- suring A pparatus, a nd has been supplied in a safe condition.
Notices © Agilent Technologies, Inc. 2002 No part of thi s manual may be reprodu ced in a ny form or by any mea ns (includin g electroni c storage an d retrieval or transla- tion in to a fore ign lang uage) without pri or agreement and written consent fr om Agilent Technolo gies, Inc.
Ein wichtiger Punkt beim Kauf des Geräts Agilent Technologies 16700B (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Agilent Technologies 16700B noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Agilent Technologies 16700B - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Agilent Technologies 16700B reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Agilent Technologies 16700B erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Agilent Technologies 16700B besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Agilent Technologies 16700B verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Agilent Technologies 16700B. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Agilent Technologies 16700B gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
