Benutzeranleitung / Produktwartung P710 des Produzenten Compaq
Zur Seite of 29
User’ s Guide Compaq P710 Color Monitor Compaq P910 Color Monito r Compaq P1210 C olor Monitor.
- 1 - ENGLISH Trademark 1. INTRODUCTION Features ............................................................ 1 Internal Preset Memory Capability ................... 3 Power Management Function .......................... 3 D D C ......................
- 2 - ENGLISH 1 INTR ODUCTION Congratulations on your purchase of the high resolution color monitor. We designed this monitor to provide you with years of reliable trouble-free operation. This guide tells you how to connect, adjust and care for your monitor.
- 3 - ENGLISH DDC Internal Preset Memory Capability To minimize adjustment needs, the factory has preset popular display standards into the monitor, as shown in Table 1. If any of these display standards are detected by the microprocessor, the picture size and position are automatically adjusted.
- 4 - ENGLISH Location Considerations When setting up and using the monitor, keep the following in mind: • For optimum viewing, avoid placing the monitor against a bright background or where sunlight or other light sources may reflect on the display area of the monitor.
- 5 - ENGLISH 5 10 10 90 90 90 90 Connect the color monitor and computer with the necessary cords and cables. See Section 3. INSTALLATION AND CONNECTION Turn on the computer. Turn on the color monitor. Set the controls. See Section 4. OSD(On Screen Display) FUNCTIONS If a problem appears.
- 1 - ENGLISH D-sub Control Names (17" & 19" Models) See figures below for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. 1. POWER SWITCH: A push-on / push-off switch for AC power.
- 2 - ENGLISH SIGNAL-A SIGNAL-B 1 2 3 / Control Names (22" Model) See figures below for the location of the user controls, indicator and connectors.
- 1 - ENGLISH 17" and 19" Models On the back of the monitor two kinds of plug-in connections are provided: AC power connector for the AC input, DB9- 15P connector for video signal input. AC Power Connection One end of the AC power cord is connected to the AC power connector on the back of the monitor.
- 2 - ENGLISH SIGNAL-A 1 2 SIGNAL-A SIGNAL-B 1 2 3 SIGNAL-B 3 The computer is required to have Windows ® 98 or later installed and USB functions. Scanner Camera REAR Upstream Port Downstream Ports 22.
- 3 - ENGLISH Installation of USB Function The following procedure permits your computer to recog- nize or "enumerate"(A USB term) the USB HUB. 1. Power on the display monitor and then the computer. 2. Start "Enumeration" from the Windows ® Desktop.
- 1 - ENGLISH 4 OSD (On Screen Display) FUNCTIONS The monitor has an OSD(On Screen Display) function. The following procedure shows how to adjust the screen using the OSD function. (1) Turn on the monitor. (2) Press button to display the OSD screen. (3) Select the group icon on Main Menu by pressing .
- 2 - ENGLISH CONTRAST Adjusts the contrast le v el. X X X BRIGHT Adjusts the black le vel of the screen X X X COLOR NO Select the desired color from Color 1, Color 2, and Color 3 presets. X R-GAIN Adjusts the red-color balances for the selected color .
- 3 - ENGLISH To restore to factory preset level. To decrease the contrast. To increase the contrast. To decrease the bright- ness. To increase the brightness. To decrease the color temperature of the color mode selected by "COLOR NO". To narrow the width of the image on the screen.
- 4 - ENGLISH To decrease the level of the moire-clear wave. To adjust the purity condition on the top-left corner. To eliminate an excessive green or white-back ground that may occur when both Sync-On-Green and external sync signals are applied to the monitor.
- 5 - ENGLISH CONTRAST Adjusts the contrast level. X X BRIGHT Adjusts the black level of the screen X X COLOR TEMPERA TURE Adjusts the color temperature of the image on the screen. X X HORIZ-SIZE Adjusts the horizontal size of the image on the screen.
- 6 - ENGLISH 19" Model HORIZ-SIZE HORIZ-PHASE VERT-SIZE VERT-POSITION PINCUSHION KEYSTONE TOP-PIN BOTTOM-PIN PIN-BALANCE KEY-BALANCE ROTATION GEOMETRY RESET Group Icon Press the Minus Button Item Item Icon Press the Plus Button To decrease the contrast.
- 7 - ENGLISH HORIZ-STATIC VERT-STATIC MOIRE CANCEL LEVEL CORNER PURITY(TL) CORNER PURITY(TR) CORNER PURITY(BL) CORNER PURITY(BR) CLAMP PULSE POSITION VIDEO LEVEL DEGAUSS POWER-SAVE CONTROL LOCK OSD POSITION DIAGNOSIS LANGUAGE To select 1.0V of video input.
- 8 - ENGLISH Adjustment Items 17" Model Items Function X: Available A B C *Moire is a series of wavy patterns caused by the interference between the aperture grille of the CRT and the raster generated by the video card. Adjust the level to the minimum value at which moire is no longer observed.
- 9 - ENGLISH 17" Model CONTRAST BRIGHT COLOR TEMPERATURE HORIZ-SIZE HORIZ-PHASE VERT-SIZE VERT-POSITION PINCUSHION KEYSTONE TOP-PIN BOTTOM-PIN PIN-BALANCE KEY-BALANCE ROTATION GEOMETRY RESET MOI.
- 1 - ENGLISH Display is dark or too bright PROBLEM ITEMS TO CHECK Before calling your 1-800-OK-COMPAQ for service, please check that the items below are properly connected or set. In case of using a non-standard signal, please check the pin assignments and the signal timing of your computer with the specification outlined in Section 6.
PROBLEM ITEMS TO CHECK LOCATION • • • Black vertical lines are visible on the screen. Thin vertical black lines on one or both sides of the screen.
- 1 - ENGLISH Si ze 55cm/22"(51cm/20" Diagonal Viewable Image) Mask type Aperture grille Gun In-line Deflection angle 9 0 ° CRT Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0.
- 2 - ENGLISH Si ze 50cm/19"(46cm/18" Diagonal Viewable Image) Mask type Aperture grille Gun In-line Deflection angle 9 0 ° CRT Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0. 24mm Face Plate Anti-glare, Anti-reflection and Anti-static film Focusing method Dynamic Beam Forming (DBF) Video 0.
- 3 - ENGLISH Si ze 45cm/17"(41cm/16" Diagonal Viewable Image) Mask type Aperture grille Gun In-line Deflection angle 9 0 ° CRT Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0. 25mm Face Plate Anti-glare, Anti-reflection and Anti-static film Focusing method Dynamic Beam Forming (DBF) Video 0.
(Female) DB9-15P MOUNTED ON THE REAR PANEL PIN ASSIGNMENTS D DC ................... DISPLAY DATA CHANNEL SDA ................... SERIAL DATA SCL .................... SERIAL CLOCK N C ..................... NO-CONNECTION D DC ............... DISPLAY DATA CHANNEL SDA .
Regulatory Compliance N o ti ce s Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
216028-001.
Ein wichtiger Punkt beim Kauf des Geräts Compaq P710 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Compaq P710 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Compaq P710 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Compaq P710 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Compaq P710 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Compaq P710 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Compaq P710 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Compaq P710. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Compaq P710 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
