Benutzeranleitung / Produktwartung UCS-SPR-C220-V1 des Produzenten Cisco
Zur Seite of 134
Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco U CS C220 M3 S er v e.
THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN TH IS MANUAL A RE SUBJECT TO CHAN GE WITHOUT N OTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDA TIONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
iii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 CONTENTS Preface vii Related Documentation vii Organization vii Audience viii Documentation Feedback viii Conventi ons viii Obtain.
Contents iv Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 CHAPTER 3 Maintaining the Server 3-1 Server Monitoring and Ma nagement Tools 3-1 Cisco Integrated Manageme nt Interface (C.
Contents v Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Replacing a Cisco Flexible Flash Card 3-40 Overview of the Pre-Installed Cisco Flexible Flash Card 3-40 Enabling a Cisco Fl.
Contents vi Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Enabling the Embedded RAID Controller in the BIOS C-10 Disabling the Embedded RAID Controller in the BIOS C-11 Launching t.
vii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface This preface describes the audi ence, organi zation, and conventions o f the Cisco UCS C220 Server Installation an d Service Guide . It al so provides information about h ow to obtain related docum entation.
viii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Audience This guide is for experien ced network administra tors who configu re and maintain Cisco servers. Documentation Feedback T o provide technical feedback on this document, or to report an error or omissi on, please send your comments to ucs-docfeedback@external.
ix Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface V aroitus TÄRKEITÄ TURVALLISUUSOHJEIT A Tämä varoitusmerkki merkitsee vaaraa.
x Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo.
xi Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo.
xii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface.
xiii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Obtaining Documentation and Submitting a Service Request For information on obtai ning documentation, using the Cisco Bug.
xiv Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface.
CH A P T E R 1-1 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 1 Overview This chapter provi des an overview of the Cisco U CS C220 server features. External Features Overview , page 1-1 Summary of Server Feat ures, page 1-3 External Features Overview The figures in this chapter show an overview of external server features.
1-2 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 1 Overvi ew Figure 1-1 shows the front pa nel features of the SFF driv es version of the server .
1-3 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 1 Overview Figure 1-3 shows the rear panel features of the server (identical for both versions of the server) . Figur e 1 -3 Rear P anel Featur e s Summary of Server Features Ta b l e 1-1 lists the features of the server .
1-4 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 1 Overvi ew Network and management I/O The server provides thes e rear-panel connectors: • One 1-Gb Ethernet dedicated management port • T wo 1-Gb Base-T Ethernet ports • One RS-232 serial port (RJ-45 connector) • One 15-pin V GA 4 connector • Tw o U S B 5 2.
1-5 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 1 Overview 6. SAS = serial attached SCSI 7. SATA = serial advanced technology attach ment.
1-6 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 1 Overvi ew.
CH A P T E R 2-1 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 2 Installing the Server This chapter d escribes how to install the server, and it includes the fo llowing sectio ns: .
2-2 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Unpacking and Inspecting the Server Unpacking and Inspecting the Server Caution When handling internal server co mponents, wear an ESD strap and handl e modules by the carrier edges only .
2-3 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Preparing for Serv er Installation Preparing for Server Installation This section prov ides informa.
2-4 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Preparing for Server Installation When you are installing a server , use the foll owing guidelines: • Plan your site configuratio n and prepare t he site before ins talling the serve r .
2-5 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack Installing the Server In a Rack This section describes how to install the server in a rack.
2-6 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack Step 2 Install the slide rails onto the rack: a. Position a slide-rail assembly inside th e two left-side r ack posts (see Figure 2-3 ).
2-7 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack b. Push the server into t he slide rails until it st ops at the internal st ops.
2-8 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack Figur e 2-5 Attac hing the Cable Management Ar m (Rear of Server Shown) Step 6 Continue with the “Initial Serv er Setup” section on page 2-9 .
2-9 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup Initial Server Setup This section includes the following topics: • Connectin.
2-10 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup Step 3 Set NIC mode, NIC redund ancy , and choose whether to enable DHCP or set static network setti ngs: a. Press the Po w er button to boot the server .
2-11 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup Note If you chose to enable DHCP , the dynamically assigned IP a nd MAC ad dresses are displayed on the console screen durin g bootup.
2-12 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup NIC Modes and NIC Redundancy Settings This server h as the follo wing NIC mode settings th at you can choose from: • Shared LOM EXT (default)—This is shared LOM extended mode.
2-13 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server System BIOS and CI MC Firmware System BIOS and CIMC Firmware This section includes inf ormation ab.
2-14 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server System BIOS and CIMC Firmware Accessing the System BIOS T o change the BIOS settings for your server , follow these steps. Detailed instructions are also pr inted on the BIOS screens.
2-15 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service He aders and Jump ers Service Headers and Jumpers This section includes the following topi.
2-16 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service Headers a nd Jumpers Using the BIOS Recovery Header J41 Depending on which stage t he BIOS becomes corrupted, you might see dif feren t behavior .
2-17 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service He aders and Jump ers Note During the BIOS update, the CIMC will shut down the server and the screen will be blank for about 10 minutes. Do n ot unplug the power cords during this update.
2-18 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service Headers a nd Jumpers Procedure 2: Use Recovery Jumper and recovery.cap File See Figure 2-6 for the location of the J41 header . Step 1 Download the BIOS update package an d extract it to a tem porary loca tion.
2-19 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service He aders and Jump ers Using the Clear CMOS Header J37 See Figure 2-6 for the location of this header . Y ou can jump er this header to clear the server’ s CMOS settings in the case of a system hang.
2-20 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service Headers a nd Jumpers.
CH A P T E R 3-1 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 3 Maintaining the Server This chapter describes how to diagnose server system problems using LEDs.
3-2 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Status LEDs an d Buttons Status LEDs and Buttons This section describes the location and meaning.
3-3 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Status LEDs and Button s System status • Green—The server is running in normal operating condition. • Green, blinking—The server is performi ng system initialization and memory check.
3-4 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Status LEDs an d Buttons Rear Panel LEDs and Buttons Figure 3-2 shows the rear panel LEDs and buttons.
3-5 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Status LEDs and Button s 1-Gb Ethernet de dicated management link status • Off—No l ink is present. • Green—Link is active. • Green, blinking—T raffic is present on the active link.
3-6 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Status LEDs an d Buttons Internal Diagnostic LEDs The server has internal fault LEDs for fan modules and DIMMs. An LED lig hts amber to indi cate a failed component.
3-7 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Preparing for Server Compone nt Installation Preparing for Server Component Installation This sect.
3-8 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Preparing for Server Co mponent Installation Removing and Replacing the Server Top Cover T o remove or replace the top co ver of the server , follow these steps: Ti p Y ou do not have to remove the cover to replace hard drives o r power supplies.
3-9 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Preparing for Server Compone nt Installation Replaceable Component Locations This section shows the lo cations of the componen ts that are discussed in this ch apter .
3-10 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Preparing for Server Co mponent Installation Serial Number Location The serial number for th e server is printed on a label on the to p of the server , near the front.
3-11 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Installing or Replacing Server Components War ni ng Bl.
3-12 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing Hard Drives or Solid State Drives This sec.
3-13 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Drive Replacement Procedure T o replace or install a h.
3-14 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing a Drive Backplane Note The Small Form Factor (eight-d rive) and Lar ge Form Factor (four -drive) backplanes and their corresponding chassi s drive bays are factory-config urab le options.
3-15 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-9 Replacing the Dr ive Bac kplane 1 Captive .
3-16 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing Fan Modules The five fan modules in the server are numbered as follows when you ar e facing the front of the server (also see Figure 3-1 1 ).
3-17 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-1 1 Replacing F an Modules 1 Rubber dampenin.
3-18 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing DIMMs This section includes the following .
3-19 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-12 DIMM Slots and CPUs DIMM Population Rules Observe the following g uidelines when installing or rep lacing DIMMs: • Each CPU supports fou r memory channels.
3-20 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components • Although 1600 MH z DIMMs can be run in Power Saving Mode (1.
3-21 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Memory Mirroring When memory mirroring is en abled, the memory subs ystem simultaneo usly writes i dentical data to two channels.
3-22 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components c. Remove the top cover as described in “Removing and Replacing the Serv er T op Cover” sectio n on page 3-8 .
3-23 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing CPUs and Heatsinks This section contains the.
3-24 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components CPU Replacement Procedure Caution CPUs and thei r motherboard s ockets are frag ile and must be handled with care to avoid damaging p ins during installation.
3-25 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-13 CPU Heatsink and Sock et Step 2 Remove a protective cap or an old CPU from the socke t (if present): • If you are remo ving an old CPU, skip to Step 3 .
3-26 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components d. Press the top button on the tool to release the ol d CPU on an anti-static surface. Figur e 3-15 Removing or Inser ting a CPU Step 4 Insert the new CPU into the Pick- and-Place tool: a.
3-27 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-16 CPU and Pick-and-Place T ool on P edestal Step 5 Install a new CPU: a. Set the Pick-and-Place tool with CPU over the empty C PU socket on the motherboard.
3-28 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components c. Apply thermal grease from an included syringe to the top of the CPU.
3-29 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Additional CPU-Related Parts To Order With RMA Replace.
3-30 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing the Motherboard RTC Battery War ni ng There is danger of explosion if the battery is replaced i ncorrectly .
3-31 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-18 Replacing the Motherboard R TC Bat tery Replacing a Mezzanine Card The server has a dedicated socket on the mother board for a mezzanine-styl e RAID controller card.
3-32 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components e. Loosen the singl e captive thum bscrew that secures the mezzanine card to the motherboard standoff. f.
3-33 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a PCIe Riser The server contains two t oolless PCIe risers for horizontal installation of PCIe cards.
3-34 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Figur e 3-21 Replacing the PCIe Riser 1 Chassis alig.
3-35 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a PCIe Card Caution Cisco supports all PCIe cards qualified and sold by Ci sco. PCIe cards not qual ified or sold by Cisco are the responsibil ity of the customer .
3-36 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing a PCIe Card Note If you are i nstalling a Ci sco UCS V irtual Interf ace Card, ther e are prereq uisite consid erations.
3-37 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents g. Replace the server in the rack , replace cables, and then power on the server by pressing the Power button.
3-38 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components RAID Controller Card Cable Routing If the PCIe card .
3-39 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Resolving Insufficient 16-Bit I/O Space The system has only 64 KB of legacy 16-bit I/O resour ces available.
3-40 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing a Cisco Flexible Flash Card This section i.
3-41 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Enabling a Cisco Flexible Flash Virtual Drive Each of the VDs on the pr e-installed Cisco Flexible Fl ash card can be separately enabled or hidden from the host.
3-42 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components T o permanently set the boot ord er fo r an HV VD, use the following steps: Step 1 Boot the server and watch for the pro mpt to press F2 to open the BIOS Setup ut ility .
3-43 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Cisco Flexible Flash Card Replacement Procedure T o install or replace a Cisco Flexib le Flash card, follow these steps: Step 1 Remove the Cisco Flexible Flash car d that you are replacing.
3-44 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Step 2 Install a Cisco Flexible Flash card: Note T o be usable for Cisco Flexible Flash, an SD card must be at least 16 GB in size.
3-45 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing the LSI RAID Battery Backup Unit or SuperCap Power Module This server supports installation of one RAID battery backup unit (BBU) or on e SuperCap Power Module (SCPM).
3-46 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Figur e 3-24 RAID Bac kup Unit Mounting Location 1 R.
3-47 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Installing a Trusted Platform Module The trusted p latform mo dule (TPM) is a sm all circu it board that attaches to a motherboard socket.
3-48 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Step 4 V erify that the TPM is now enabled. a. W atch during bootup for the F2 promp t, and then press F2 to enter BIOS setup.
3-49 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Step 1 V erify that a TPM is now installed and enab led in the server: a.
3-50 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing a SCU Upgrade ROM Module T o remove and replace a module, use the f ollowing procedure. Step 1 Prepare the server for component installation: a.
3-51 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a Software RAID Key Module T o remove and replace a software RAI D key module, use the following procedur e.
3-52 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Replacing Power Supplies The server can have one or two power supplies. When two power sup plies are installed they are redundant as 1+1.
3-53 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-28 Removing and Replacing P ower Supplies Wiring a DC Power Supply War ni ng A readily accessible two-poled d isconnect device must be incorporate d in the fixed wiring.
3-54 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components Use the follo wing procedure to co nnect wires to th.
3-55 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Enabling or Disabling the Internal USB Port The factory default is for all USB ports on the server to be enabled.
3-56 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Server Installing or Replacin g Server Components.
A-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX A Server Specifications This appendix lists t he technical specification s for the server and includ es the following sec.
A-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix A Server Sp ecifications Environmental Specifications Environmental Specifications Ta b l e A-2 lists the environmental speci fications for the server .
A-3 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix A Server Spec ifications Power Spec ifications Power Specifications The po wer specificatio ns for the po wer supply opti.
A-4 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix A Server Sp ecifications Power Specifications 650W AC Power Supply Ta b l e A-4 lists the specifications for each 650 W AC power supply (Cisco par t number UCSC-PSU-650W).
B-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX B Power Cord Specifications This appendix pro vides supp orted pow er cable specif ications. Supported Power Cords and Plugs Each po wer supply has a sep arate po wer cord.
B-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs CAB-9K10A- IT Pow er Cord, 250 V A C 10 A CEI 23-16 Plug Italy 8.2 2.5 Figure B-7 CAB-9K10A- SW Pow er Cord, 250 V A C 10 A MP232 Plug Switzerland 8.
B-3 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs AC Power Cord Illustrations This section includes the A C po wer cord illustrations. See Figure B-1 through Figure B-15 .
B-4 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs Figur e B-4 CAB-9K1 0A -EU Figur e B-5 SFS-250V -1 0A -ID Figur e B-6 SFS-250V -1 0A -IS Connector : VSCC15 Cordset rating: 10A/16 A, 250 V Length: 8 ft 2 in.
B-5 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs Figur e B-7 CAB-9K1 0A -IT Figur e B-8 CAB-9K1 0A -SW Figur e B-9 CAB-9K1 0A -UK Plug: I/ 3 G (CEI 2 3 -16) Connector C15M (EN60 3 20/C15 ) Cordset rating: 10 A, 250 V Length: 8 ft 2 in.
B-6 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs Figur e B-1 0 CAB-AC-250V/13A Figur e B-1 1 CAB-N5K6A -NA Figur e B-12 CAB-9K12A -NA Cordset rating 1 3 A, 250V (6.
B-7 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs Figur e B-13 CAB-C13-CBN, Jumper P ow er Cor d (0.
B-8 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs.
C-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX C RAID Controller Considerations This appendix contain s the follo wing sections: • Supported RAID Cont rollers and Req.
C-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Supported RAID Cont rollers and Required Cab les Supported RAID Controllers and Required .
C-3 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Supported RAID Controlle rs and Required Cables Ta b l e C-2 Cisco UCS C220 M3 Larg e For m Fact or Dr ives RAID Options Controller Style Maximum Driv es SCPM 1 1.
C-4 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Mixing Drive Types in RAID Groups Mixing Drive Types in RAID Groups Ta b l e C-3 lists the technical capabili ties for mixing hard disk dri v e (HDD) and solid stat e dri ve (SSD) types in a RAID group.
C-5 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Factory-Default Option ROM Settings Factory-Default Option ROM Settings Ta b l e C-4 describes the option ROM (OPROM) set tings for card slots that are made a t the factory for various conf igurations.
C-6 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Migration RAID Controller Migration This server supports hardware RA ID (mezzanine and PCIe controller card s) and embedded software RAID.
C-7 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Embedded MegaRAID Controller Note VMware ESX/ESXi or any other virtualized environments are not supported fo r use with the embedded MegaRAID controller .
C-8 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Notes on Supported Embedded MegaRAID Levels The follo wing RAID le v els are supported b y the embedded Mega RAID controller .
C-9 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Installing a SCU Upgrade ROM Modu le For Embedded RAID SAS Support The SCU Upgrade R OM module contains a chip on a small circuit board .
C-10 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Installing a Software RAID Key Module for Embedded RAID 5 Support The software RAID key module cont ains a chip on a small c ircuit bo ard.
C-11 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Disabling the Embedded RAID Controller in the BIOS Caution Data migr ation from SW RAID to HW RAID is not supported and could result in data loss.
C-12 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Downloading the LSI MegaSR Drivers The MegaSR dri vers are included in the C-series driv er ISO for your serv er and OS.
C-13 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Step 4 Start the W indows dri ver install ation using one .
C-14 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Linux Driver Installation This section e xplains the st eps to install the embedded Me gaRAID de vice d riv er in a Red Hat Enterprise Linux installation o r a SuSE Linux Enterprise Serv er installation.
C-15 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Step 5 Open the DOS Command Prompt and na vigate to the director y where ra w write.ex e is located. Step 6 T ype the follo wing co mmand to create the installation disk ette: raw wri te Step 7 Press Enter .
C-16 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Installing the Red Hat Linux Driver For the specif ic supported OS versions, see the Hardware and Software Interoperability Matrix for your server release.
C-17 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Note The noprobe v alues depend on the number of dri v es .
C-18 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller • T o install from lo cal media: Connect an e xternal USB D VD driv e to the serv er and then insert the first RHEL i nstall disc into the dri ve.
C-19 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling RAID Controller Cabling This section includes the following top.
C-20 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling Cisco UCS C220 Server Cabling This section contains the followin.
C-21 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling Mezzanine-Style Card This option can co ntrol up to eight d riv es. The required UCSC-CABLE1 cable kit has tw o mini-SAS cables.
C-22 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling LFF 4-Drive Backplane Cabling The cable connections required for each t ype of controller ar e as follo ws: Embedded RAID This option can co ntrol up to four d riv es.
C-23 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Restoring RAID Configuration Af ter Replacing a RAID Controller Restoring RAID Configuration After Replacing a RAID Controller When you replace a RAID controller, the RAID co nfigu ration that is stored in the controller is lost.
C-24 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations For More Information • LSI SAS2 Integrated RAID Soluti on User Gui de (for LSI SAS 2008) http://www .cisco.com /en/US/docs/un ified_computing/ucs/3rd-party/lsi/ irsas/userguide/LSI_IR_SAS_UG.
D-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX D Installation for Cisco UCS Integration The Cisco UCS integratio n instructions ha ve been mov ed to the integratio n gu.
D-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix D Installati on for Cisco UCS Integration.
Ein wichtiger Punkt beim Kauf des Geräts Cisco UCS-SPR-C220-V1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cisco UCS-SPR-C220-V1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cisco UCS-SPR-C220-V1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cisco UCS-SPR-C220-V1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cisco UCS-SPR-C220-V1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cisco UCS-SPR-C220-V1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cisco UCS-SPR-C220-V1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cisco UCS-SPR-C220-V1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cisco UCS-SPR-C220-V1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
