Benutzeranleitung / Produktwartung 12000 series des Produzenten Cisco Systems
Zur Seite of 263
show gsr CF-677 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show gsr T o display hardw are information on the Cisco 1 20 00 series Gigabit Switch Rout ers (GSRs), use the show gsr command in EXEC mode.
show gt64010 (7200) CF-678 Cisco IOS Configuration Fundamentals Command Reference July 2008 show gt64010 (7200) T o display all GT64 010 internal re gisters and interrupt status on the Cisco 7200 seri es routers, use the show gt64010 command in EXEC mode.
show gt64010 (7200) CF-679 Cisco IOS Configuration Fundamen tals Command Reference July 2008 internal_spc_decode : 0xA0000000 (b/s 0x000000A0) bus_err_low : 0x00000000 (b/s 0x00000000) bus_err_high : 0x00000000 (b/s 0x00000000) .
show history CF-680 Cisco IOS Configuration Fundamentals Command Reference July 2008 show history T o list the commands you ha ve entered in the current EXEC sessio n, use the show history command in EXEC mode. show history Syntax Descripti on This command has no ar guments or ke ywords.
show history CF-681 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Related Commands Com ma nd De scr ipt io n history size Enables the command history functi on, or changes the command history buf fer size for a parti cular line.
show idb CF-682 Cisco IOS Configuration Fundamentals Command Reference July 2008 show idb T o display information about t he status of interface descript or blocks (IDBs), use the show idb command in pri vileged EXEC mode. show idb Syntax Descripti on This command ha s nor arguments or keywords.
show idprom CF-683 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show idprom T o display the identif ication pr ogrammable read-only memor y (IDPR OM) information for field- replaceable units (FR Us), use the sho w idprom comman d in pri vileged EXEC mode.
show idprom CF-684 Cisco IOS Configuration Fundamentals Command Reference July 2008 The module { slot | slot / subslot [ clei ]} syntax designates either the slot locati on alone of the SIP i n the ch.
show idprom CF-685 Cisco IOS Configuration Fundamen tals Command Reference July 2008 This exampl e show s how to display IDPR OM informat ion for po wer supply 1: Router# show idprom power-supply 1 IDPROM for power-supply #1 (FRU is '110/220v AC power supply, 1360 watt') OEM String = 'Cisco Systems, Inc.
show idprom CF-686 Cisco IOS Configuration Fundamentals Command Reference July 2008 CISCO-STACK-MIB SNMP OID = 22 *** end of power supply block *** End of IDPROM image This exampl e show s how to disp.
show idprom CF-687 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Manufacturing Assembly Deviation = '00' Hardware Revision = 0.
show idprom CF-688 Cisco IOS Configuration Fundamentals Command Reference July 2008 Top Assy. Part Number : 68-2177-01 73/68 Board Revision : 05 73/68 Board Revision : 01 Hardware Revision : 0.
show inventor y CF-689 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show inventory T o display the pr oduct in v entory list ing of all Cisco p roducts installed in the netwo rking de vice, use the show inventor y command in user EXEC or pri vile ged EXEC mode.
show inventor y CF-690 Cisco IOS Configuration Fundamentals Command Reference July 2008 Examples The following is sample outpu t from the show in ventory command witho ut any ke ywords or arguments. This sample output di splays a list of Cisco entit ie s installed in a router that are assigned a PID.
show inventor y CF-691 Cisco IOS Configuration Fundamen tals Command Reference July 2008 For diagnostic p urposes, the show inventor y command can be used with t he raw ke yword to display ev ery RFC 2737 entit y including those withou t a PID, UDI, or othe r physical id entification.
show logging CF-692 Cisco IOS Configuration Fundamentals Command Reference July 2008 show logging T o display the state of syst em logging (syslog) and t he contents of the standar d system logging b uff er , use the show logging command i n pri vileged EXEC mod e.
show logging CF-693 Cisco IOS Configuration Fundamen tals Command Reference July 2008 If debu gging is enabled (using an y debug command) , and the logging b uf fer is conf igured to include le vel 7 ( debugging ) messages, debu g output will be i ncluded in the system log.
show logging CF-694 Cisco IOS Configuration Fundamentals Command Reference July 2008 28 message lines logged, 0 message lines rate-limited, 0 message lines dropped-by-MD, xml disabled, sequence number disabled filtering disabled Logging to 172.25.126.
show logging CF-695 Cisco IOS Configuration Fundamen tals Command Reference July 2008 The follo wing e xample sho ws that syslog messages from the system b uf fer are included, with time stamps. In this e xample, the softw are image does not sup port XML formatting or ESM filterin g of syslog messages.
show logging CF-696 Cisco IOS Configuration Fundamentals Command Reference July 2008 .Jul 11 15:31:34 EDT:%BGP-3-MAXPFXEXCEED:No. of prefix received from 209.165.200.226 (afi 0):16444 exceed limit 375 .Jul 11 15:31:34 EDT:%BGP-5-ADJCHANGE:neighbor 209.
show logging CF-697 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Ta b l e 9 2 describes the logging le v el fi elds sho wn in the display . Related Commands T able 92 s how logging summary Field Descriptions Field Description SLO T Indicates the slot number of the line card.
show logging co unt CF-698 Cisco IOS Configuration Fundamentals Command Reference July 2008 show logging count T o display a summary of the number of times certa in system error messages are occuring, use the show logging command in pri vileged EXEC mode.
show logging count CF-699 Cisco IOS Configuration Fundamen tals Command Reference July 2008 SYS BOOTTIME 6 1 00:00:12 SYS RESTART 5 1 00:00:11 SYS CONFIG_I 5 1 00:00:05 ------------- -----------------.
show logging h istory CF-700 Cisco IOS Configuration Fundamentals Command Reference July 2008 show logging history T o display informatio n about the state of the syslog history tabl e, use the sho w logging history command in pri vile ged EXEC mode. show logging history Syntax Descripti on This command has no ar guments or ke ywords.
show logging history CF-701 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Related Commands messages ignored Number of messages no t stored in the hi story table beca use the sev erity lev el is greater than that specified with the logging history command.
show logging system CF-702 Cisco IOS Configuration Fundamentals Command Reference July 2008 show logging system T o display the System Event Archi ve (SEA ) logging system disk , use the show logging system command in pri vile ged EXEC mode. show logging system [ disk | size ] Syntax Descripti on Defaults This command has no def ault settings.
show logging system CF-703 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Related Commands T able 95 show logging system Field Descr iptions Field Description MOD/SUB Indicates the source of the ev ent message. SEV Indicates the sev erity level of the message.
show logging xml CF-704 Cisco IOS Configuration Fundamentals Command Reference July 2008 show logging xml T o display the state of syst em message logging in an XML format, and to display the contents of th e XML syslog buf fer , use the show log ging xml command in pri vile ged EXEC mode.
show logging xml CF-705 Cisco IOS Configuration Fundamen tals Command Reference July 2008 <logging-exception size="8192 bytes"></logging-exception> <count-and-timestamp-loggin.
show memory CF-706 Cisco IOS Configuration Fundamentals Command Reference July 2008 show memory T o display statistics about memor y when Cisco IOS or Cisco IOS software Modularity i mages are running, use the show memory command in user EXEC or pri vile ged EXEC mode.
show memory CF-707 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Cisco IOS Software Modularity No optional ke ywor ds or argument s are supported for the sho w memory command when a Software Modu larity image is running.
show memory CF-708 Cisco IOS Configuration Fundamentals Command Reference July 2008 The output of the show memory free command contains the same t ypes of information as the show memory output, excep t that only free memory is displayed, and t he information is ordered b y free list.
show memory CF-709 Cisco IOS Configuration Fundamen tals Command Reference July 2008 The follo wing e xample displays details o f a memory block overflo w correction when the excepti on memory ignore .
show memory CF-710 Cisco IOS Configuration Fundamentals Command Reference July 2008 0x76EAC 692 1 692 XDI data 0x77764 408 1 408 Init 0x77776 116 1 116 Init 0x777A2 408 1 408 Init 0x777B2 116 1 116 Init 0xA4600 24 3 72 List 0xD9B5C 52 1 52 SSE Manager .
show memory allocating-proce ss CF-711 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show memory allocating-process T o display statistics on allo cated memory with corresponding allocating processes, use the show memory allocating-process command in user EXEC or pri vile ged EXEC mode.
show memory allocatin g-process CF-712 Cisco IOS Configuration Fundamentals Command Reference July 2008 The follo wing is sample outpu t from the show memory allocating-process totals command: Router#.
show memory allocating-proce ss CF-713 Cisco IOS Configuration Fundamen tals Command Reference July 2008 T able 101 describes th e signif icant f ields sho wn in the display .
show memory de ad CF-714 Cisco IOS Configuration Fundamentals Command Reference July 2008 show memory dead T o display st atistics on me mory alloca ted by processes that hav e terminated, use the show memory dead command in user EXEC or pri vile ged EXEC mode.
show memory dead CF-715 Cisco IOS Configuration Fundamen tals Command Reference July 2008 T able 102 describes th e signif icant f ields sho wn in the display . T able 1 02 show memory dead Field Descr iptions Field Description Head Hexadecimal address of the head of the memory allocation chain.
show memory de bug incremental CF-716 Cisco IOS Configuration Fundamentals Command Reference July 2008 show memory debug incremental T o display informatio n about memory leaks after a starting time has been established, u se the show memory debug incr emental command in priv ileged EXEC mode.
show memory debug incremental CF-717 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Note All memory leak detection commands in v oke n ormal m ode memory leak detect ion, except when the lo w memory option is specif ically in voked b y use of the lo wmem ke yword.
show memory de bug incremental CF-718 Cisco IOS Configuration Fundamentals Command Reference July 2008 Related Commands Com ma nd De scr ipt io n set memory deb ug incremental starti ng-time Sets the current time as t he starting time for incremental an alysis.
show memory debug leaks CF-719 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show memory debug leaks T o display detected memory leaks, use the show memory debug leaks command in pri vile ged EXEC mode.
show memory debu g leaks CF-720 Cisco IOS Configuration Fundamentals Command Reference July 2008 Note All memory leak detection commands in v oke n ormal m ode memory leak detect ion, except when the lo w memory option is specif ically in voked b y use of the lo wmem ke yword.
show memory debug leaks CF-721 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Chunk Elements: Address Size Parent Name I/O memory Address Size Alloc_pc PID Name Chunk Elements: Addr.
show memory debu g leaks CF-722 Cisco IOS Configuration Fundamentals Command Reference July 2008 I/O memory Alloc_pc total leak size Processor memory Alloc_pc total leak size 608D2848 32776 inconclusi.
show memory debug leaks CF-723 Cisco IOS Configuration Fundamen tals Command Reference July 2008 0x605B7E70 0000000032 0000000001 0000000032 Init 0x605B7E98 0000000040 0000000001 0000000040 Init 0x605.
show memory debu g references CF-724 Cisco IOS Configuration Fundamentals Command Reference July 2008 show memory debug references T o display deb ug information on references, use the show memory debug references command in user EXEC or pri vileged EXEC mode.
show memory debug reference s CF-725 Cisco IOS Configuration Fundamen tals Command Reference July 2008 T able 106 describes th e signif icant f ields sho wn in the displays. T able 1 06 show me mory debug r ef er ences Field Descr iptions Field Description Address Hexadeci mal address of the block having the gi ven or dang ling reference.
show memory debu g unused CF-726 Cisco IOS Configuration Fundamentals Command Reference July 2008 show memory debug unused T o display deb ug informati on on leaks that are accessible, but are no longer needed, use the show memory debug unused command in user EXEC or pri vile ged EXEC mode.
show memory debug unused CF-727 Cisco IOS Configuration Fundamen tals Command Reference July 2008 T able 107 describes th e signif icant f ields sho wn in the display . T able 1 07 show memory debu g unused Field Descr iption s Field Description Address H exad ecimal address of the block.
show memory ecc CF-728 Cisco IOS Configuration Fundamentals Command Reference July 2008 show memory ecc T o display single-bit E r ro r C od e C o rr e ct i on ( ECC) error lo gset data, use the show memory ecc command in pri vileg ed EXEC mode. show memory ecc Syntax Descripti on This command has no ar guments or ke ywords.
show memory ecc CF-729 Cisco IOS Configuration Fundamen tals Command Reference July 2008 T able 108 describes th e signif icant fi elds sho wn in the f irst section of the display . Related Commands T able 1 08 show memory ecc Field Desc r iptions Field Description Occured n time(s) Number of single-bit errors that has occurred.
show memory failures alloc CF-730 Cisco IOS Configuration Fundamentals Command Reference July 2008 show memory failures alloc T o display statistics about f ailed memory allocatio n requests, use the show memory failures alloc command in the pri vile ged EXEC mode.
show memory fast CF-731 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show memory fast T o display fa st memory details for the router , use the sho w memory fast command.
show memory fast CF-732 Cisco IOS Configuration Fundamentals Command Reference July 2008 841BE944 0000000504 841BE33C 841BEB64 001 -------- -------- 815A9630 Watched Message Queue 841BEB64 0000001504 .
show memory fast CF-733 Cisco IOS Configuration Fundamen tals Command Reference July 2008 0x819F1DE4 524640 8 BGP (0) update 0x815C4FD4 393480 6 MallocLite 0x815B5FDC 351528 30 TW Buckets 0x819F14DC 3.
show memory fragme nt CF-734 Cisco IOS Configuration Fundamentals Command Reference July 2008 show memory fragment T o display the bloc k details of fragmented free bloc ks and allocated blocks, whi ch is physically just before or after the blocks on the f ree list, use the show memory fragment command in user EXEC or pri vileged EXEC mod e.
show memory fragment CF-735 Cisco IOS Configuration Fundamen tals Command Reference July 2008 0x607CA400 36288 2 pak subblock chunk 0x6255648C 28948 1 CCPROXY_CT 0x6047DD7C 24628 1 atmdx_bfd_cache 0x6.
show memory fragme nt CF-736 Cisco IOS Configuration Fundamentals Command Reference July 2008 The follo wing is sample outpu t from the show memory pr ocessor fragment detail command: Router# show mem.
show memory multibus CF-737 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show memory multibus T o display statistics about mu ltibus memory , including memory-free pool statistics, us e the show memory multibus command in user EXEC or pri vileged EXEC mode.
show memory multibus CF-738 Cisco IOS Configuration Fundamentals Command Reference July 2008 Pre v Ad dress of the preceding block (should match t he address on the preceding line). Next Address of the follo wing block (sh ould match the address on the fo llowi ng line).
show memory pci CF-739 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show memory pci T o display statistics about Peripheral Compon ent Interconnect (PCI) memory , use t he show memory pci command in user EXEC or pri vile ged EXEC mode.
show memory pci CF-740 Cisco IOS Configuration Fundamentals Command Reference July 2008 Pr ev F Address of the preceding free block (if free). Ne xt F Address of the follo wing free block (if free). Alloc PC Address of the program counter that allocated the block.
show memory processor CF-741 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show memory processor T o display stat istics on the router processor memory , use the show memory processor command in user EXEC or pri vileged EXEC mode.
show memory proc essor CF-742 Cisco IOS Configuration Fundamentals Command Reference July 2008 The follo wing is sample outpu t from the show memory pr ocessor fragment command: Router# show memory pr.
show memory processor CF-743 Cisco IOS Configuration Fundamen tals Command Reference July 2008 659CF6B0 0000000024 659CF678 659CF6FC 000 6698FFC8 659CF86C 6078A2CC Init 659CF86C 0000000024 659CF710 65.
show memory proc essor CF-744 Cisco IOS Configuration Fundamentals Command Reference July 2008 Lowest (b) Smallest amount of free memory since last boot (in bytes).
show memory scan CF-745 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show memory scan T o monitor the number and type of parit y (memory) errors on yo ur system, use the show memory scan command in EXEC mode. show memory scan Syntax Descripti on This command has no ar guments or ke ywords.
show memory scan CF-746 Cisco IOS Configuration Fundamentals Command Reference July 2008 Disposit The action tak en in response to th e error: • BlockInUse—An error was de tected in a busy block. • InFieldPre v—An error w as detect ed in the previous field of a block he ader .
show memory statistics history table CF-747 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show memory statistics history table T o display the hi story of memory cons umption, use the show memory statistics hi story table command in user EXEC or pri vileged EXEC mode.
show memory statistics history table CF-748 Cisco IOS Configuration Fundamentals Command Reference July 2008 Time: 10:44:24.342 Used(b): 20701400 Largest(b): 381064952 Free blocks :194 Time: 09:38:53.038 Used(b): 20701400 Largest(b): 381064952 Free blocks :194 Time: 08:33:35.
show memory statistics history table CF-749 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Time: 11:46:25.137 Used(b): 7297744 Largest(b): 59797664 Free blocks :25 Time: 10:44:24.344 Used(b): 7297744 Largest(b): 59797664 Free blocks :25 Time: 09:38:53.
show memory transie nt CF-750 Cisco IOS Configuration Fundamentals Command Reference July 2008 show memory transient T o display statistics about transient memory , use the show memory transient command in user EXEC or pri vileged EXEC mode.
show memory transient CF-751 Cisco IOS Configuration Fundamen tals Command Reference July 2008 NextF Address of the follo wing free block (if free). Alloc PC Address of the system call th at allocated the block.
show microcode CF-752 Cisco IOS Configuration Fundamentals Command Reference July 2008 show microcode T o display microcode image info rmatio n av ailabl e on line cards, use the show microcode command in EXEC mode. show microcode Syntax Descripti on This command has no ar guments or ke ywords.
show microcode CF-753 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Related Commands Com ma nd De scr ip tio n microcode (70 00/7500) Specifies where microcode shou ld be loaded from on Cisco 7500/7000RSP routers.
show mls statistics CF-754 Cisco IOS Configuration Fundamentals Command Reference July 2008 show mls statistics T o display the Multilayer Swit ching (MLS) statistics for the Int ernet Protocol (IP), .
show mls statistics CF-755 Cisco IOS Configuration Fundamen tals Command Reference July 2008 L3 Forwarding Engine Total Packets Bridged : 20273 Total Packets FIB Switched : 7864 Total Packets ACL Rout.
show mls statistics CF-756 Cisco IOS Configuration Fundamentals Command Reference July 2008 Related Commands Com ma nd Des cri pt ion show mls asic display the application-specif ic inte grated circuit (ASIC) ver si on show mls df-table Displays information about the DF table.
show module CF-757 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show module T o display the mod ule status and information , use the show module command in user EXEC or pri vileged EXEC mod e. show module [ mod-num | al l | pro vision | version ] Syntax Descripti on Defaults This command has no defa ult settings.
show module CF-758 Cisco IOS Configuration Fundamentals Command Reference July 2008 Mod Sub-Module Model Serial Hw Status --- --------------------------- --------------- --------------- ------- ------- 5 Policy Feature Card 3 WS-F6K-PFC3 SAD0644031P 0.
show module CF-759 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Module Provision 1 dynamic 2 dynamic 3 dynamic 4 dynamic 5 dynamic 6 dynamic 7 dynamic 8 dynamic 9 dynamic 10 dynam.
show monitor even t-trace CF-760 Cisco IOS Configuration Fundamentals Command Reference July 2008 show monitor event-trace T o display ev ent trace messages for Cisco IO S software subsystem components, use the show monitor event- trace command in pri vileged EXEC mode.
show monitor event-trace CF-761 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Usage Guidelines Use the show monitor e vent-trace command to display trace message information . The trace function is not lock ed while information is b eing displayed to the console, which means th at new trace messages can accumulate in me mory .
show monitor even t-trace CF-762 Cisco IOS Configuration Fundamentals Command Reference July 2008 3d07h: EVENT: Session [172.16.10.2,172.16.10.1,Fa6/0,2], state Fail -> Down (from LC) 3d07h: EVENT: Session [172.
show monitor event-trace CF-763 Cisco IOS Configuration Fundamen tals Command Reference July 2008 In the following e xample, all ev ent trace messages for the Cisco Express Forwar ding component are displayed: Router# show monitor event-trace cef events all 00:00:18.
show monitor even t-trace CF-764 Cisco IOS Configuration Fundamentals Command Reference July 2008 00:00:24.620: Flag 0x7BF6B62C set to yes 00:00:24.620: Flag IPv4 CEF switching enabled set to yes 00:00:24.624: GState CEF enabled 00:00:24.628: SubSys ipv4fib_les init 00:00:24.
show monitor event-trace CF-765 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Related Commands Com ma nd Des cri pt ion monitor ev ent-trace (EXEC) C ontrols e vent trace functions for a specified Cisco IOS software subsystem component.
show monitor permit-list CF-766 Cisco IOS Configuration Fundamentals Command Reference July 2008 show monitor permit-list T o display the permit-li st state and interfaces configured, use the show monito r permit-list command in user EXEC or pri vileged EXEC mode.
show monitor session CF-767 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show monitor session T o display informat ion about the ERSP AN, SP AN and RSP AN sessions, use the show monitor session command in user EXEC mode.
show monitor session CF-768 Cisco IOS Configuration Fundamentals Command Reference July 2008 Usage Guidelines The erspan-destination and erspan-source k eywords are no t supported on Catalyst 6500 series switches that are con figur ed with a Supervisor Engi ne 2.
show monitor session CF-769 Cisco IOS Configuration Fundamen tals Command Reference July 2008 ------------------------------------------------------- Global Egress SPAN Replication Mode Capability: Sl.
show monitor session CF-770 Cisco IOS Configuration Fundamentals Command Reference July 2008 This exampl e show s how to display detailed information about the source ERSP AN sessions only: Router# sh.
show monitor session CF-771 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Operational mode of egress span replication : Centralized Configured mode of egress span replication : Dis.
show msfc CF-772 Cisco IOS Configuration Fundamentals Command Reference July 2008 show msfc T o display Multi layer Switching Featur e Card (MSFC) information, use the show msfc command in user EXEC or pri vileged EXEC mode. show msfc { buff e rs | eeprom | fault | netint | tlb } Syntax Descripti on Defaults This command has no def ault settings.
show msfc CF-773 Cisco IOS Configuration Fundamen tals Command Reference July 2008 RSFC CPU IDPROM: IDPROM image: (FRU is 'Cat6k MSFC 2 daughterboard') IDPROM image block #0: hexadecimal contents of block: 00: AB AB 01 90 13 22 01 00 00 02 60 03 00 EA 43 69 .
show msfc CF-774 Cisco IOS Configuration Fundamentals Command Reference July 2008 pair #6: type=00, count=00 pair #7: type=00, count=00 sram_size = 4096 sensor_thresholds = sensor #0: critical = 75 oC.
show msfc CF-775 Cisco IOS Configuration Fundamen tals Command Reference July 2008 0x1E000000:0x1E1FFFFF 0x01E000000:0x01E1FFFFF CacheMode=2, RW, Valid 0x1E880000:0x1E881FFF 0x01E880000:0x01E881FFF Ca.
show pagp CF-776 Cisco IOS Configuration Fundamentals Command Reference July 2008 show pagp T o display port-ch annel information, use the sh ow pagp command in user EXEC or pri vile ged EXEC mode. show pagp [ gr oup-number ] { counters | inter nal | neighbor | pgr oup } Syntax Descripti on Defaults This command has no def ault settings.
show pagp CF-777 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Channel group: 1024 Fa5/8 0 0 0 0 Router# This example sh ows ho w to display in ternal P AgP information: Router# show pagp 1 internal Flags: S - Device is sending Slow hello.
show parser dump CF-778 Cisco IOS Configuration Fundamentals Command Reference July 2008 show parser dump T o display the CLI syntax o ptions for all command modes or for a specif ied command mode, use the show parser dump command in pri vile ged EXEC mode.
show parser dump CF-779 Cisco IOS Configuration Fundamen tals Command Reference July 2008 redirection to a f ile using the | re d i rec t URL syntax at the end of the command is highly recommended. (See the documentatio n for the show <command> r edir ect command for more i nformation on using this command exte nsion.
show parser dump CF-780 Cisco IOS Configuration Fundamentals Command Reference July 2008 dnis-group DNIS g roup configuration mode exec Exec mode filter Output filter mode filterserver AAA filter serv.
show parser dump CF-781 Cisco IOS Configuration Fundamen tals Command Reference July 2008 sss-subscriber SSS subscriber configuration mode subinterface Subinterface configuration mode subscriber-polic.
show parser dump CF-782 Cisco IOS Configuration Fundamentals Command Reference July 2008 15 type dhcp dest-ipaddr <address> source-ipaddr <address> option <82-82> circuit-id <stri.
show parser dump CF-783 Cisco IOS Configuration Fundamen tals Command Reference July 2008 enable : Enable control packets exchange (default) . . . ! Ctrl-Z used here to interrupt output and return to CLI prompt. Router# config terminal Enter configuration commands, one per line.
show parser macro CF-784 Cisco IOS Configuration Fundamentals Command Reference July 2008 show parser macro T o display the smart port macros, use the show parser macro command in privile ged EXEC mode.
show parser macro CF-785 Cisco IOS Configuration Fundamen tals Command Reference July 2008 switchport mode trunk switchport nonegotiate # Configure qos to trust this interface auto qos voip trust mls qos trust dscp # Ensure fast access to the network when enabling the interface.
show parser statistics CF-786 Cisco IOS Configuration Fundamentals Command Reference July 2008 show parser statistics T o displays statisti cs about the last conf iguration f ile parsed and the status of the Parser Cache feature, use the show parser statistics command in privileg ed EXEC mode.
show parser statistics CF-787 Cisco IOS Configuration Fundamen tals Command Reference July 2008 In the following e xample the show parser statistics command is used to compare the parse-t ime of a larg e conf iguration f ile with the P arser Cache f eature disabled and enable d.
show parser statistics CF-788 Cisco IOS Configuration Fundamentals Command Reference July 2008 These results sho w an impro vement to the lo ad time for the same conf iguration f ile from 1272 milliseconds (ms) to 820 ms when the P arser Cach e feature was enabl ed.
show pci CF-789 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show pci T o display information abou t the peripheral component int erconnect (PCI) hardware registers or bri dge registers for the Cisco 7200 series routers, use the show pci command in EXEC mode.
show pci CF-790 Cisco IOS Configuration Fundamentals Command Reference July 2008 GT64010 External PCI Configuration registers: Vendor / Device ID : 0xAB114601 (b/s 0x014611AB) Status / Command : 0x170.
show pci hardware CF-791 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show pci hardware T o display info rmation about the Host-PCI bridge, use the show pci hardware command in EXEC mode. show pci hardwar e Syntax Descripti on This command has no ar guments or ke ywords.
show pci hard ware CF-792 Cisco IOS Configuration Fundamentals Command Reference July 2008 T able 1 19 show pci hardw ar e Field Descr iptions Field Description Device/V endor ID Identifies the PCI v e ndor and de vice. The v alue 0x401310EE identif ies the device as t he Xilinx -based Host-PCI bridge for the Cisco 2600 router .
show plat form CF-793 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show platform T o display platform information, use the show platf orm command pri vile ged EXEC mode.
show platform CF-794 Cisco IOS Configuration Fundamentals Command Reference July 2008 Command History Usage Guidelines This command is si milar to the show msfc command . Examples This example sho ws ho w to display b uf fer -allocation information : Router# show platform buffers Reg.
show plat form CF-795 Cisco IOS Configuration Fundamen tals Command Reference July 2008 T able 120 describes th e signif icant f ields sho wn in the display .
show platform CF-796 Cisco IOS Configuration Fundamentals Command Reference July 2008 Hardware Revision = 0.701 Manufacturing bits = 0x0 Engineering bits = 0x0 SNMP OID = 9.
show plat form CF-797 Cisco IOS Configuration Fundamen tals Command Reference July 2008 This exampl e show s how to display fault-date in formation: Router# show platform fault Fault History Buffer: s72033_rp Software (s72033_rp-JSV-M), Experimental Version 12.
show platform CF-798 Cisco IOS Configuration Fundamentals Command Reference July 2008 . . 0x58000000:0x59FFFFFF 0x088000000:0x089FFFFFF CacheMode=3, RW, Valid 0x5A000000:0x5BFFFFFF 0x08A000000:0x08BFF.
show platfo rm hardwar e capacity CF-799 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show platform hardware capacity T o display the capacities and uti lizations for the hardware r esources, use the show platf orm hardwar e capacity command in pri vile ged EXEC mode.
show platform hardwar e capacity CF-800 Cisco IOS Configuration Fundamentals Command Reference July 2008 The show platf orm hard ware capacity cpu command d isplays the follo wing inf ormation: • CP.
show platfo rm hardwar e capacity CF-801 Cisco IOS Configuration Fundamen tals Command Reference July 2008 • Module-specif ic switching informat ion, including the fol lowin g information: – Part .
show platform hardwar e capacity CF-802 Cisco IOS Configuration Fundamentals Command Reference July 2008 Bus utilization: current is 100%, peak was 100% at 12:34 12mar45 Fabric utilization: ingress eg.
show platfo rm hardwar e capacity CF-803 Cisco IOS Configuration Fundamen tals Command Reference July 2008 IPv4: 0 reserved none IPv4: 1 Intf FulNAT_INGRESS NAT_EGRESS FM_GUARDIAN IPv4: 2 unused none .
show platform hardwar e capacity CF-804 Cisco IOS Configuration Fundamentals Command Reference July 2008 IPv6 replication mode: ingress Bi-directional PIM Designated Forwarder Table usage: 4 total, 0 .
show platform software filesyst em CF-805 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show platform software filesystem T o display info rmation about f ile systems, use the sho w platf orm software f ilesystem command in pri vileged EXEC or d iagnostic mode.
show platform software filesystem CF-806 Cisco IOS Configuration Fundamentals Command Reference July 2008 Examples The followi ng example d isplays information about the f iles in the boot flash file syst em. It also sho ws the number of b ytes used out of the total a v ailable in the bootflash f ile system.
show platform software filesyst em CF-807 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Related Commands Com ma nd De scr ip tio n show platf orm softwar e mount Displays the m oun.
show platform software memory CF-808 Cisco IOS Configuration Fundamentals Command Reference July 2008 show platform software memory T o display memory infor mation for the specif ied process, use the sho w platform softwar e memory command in pri vile ged EXEC or diagnost ic mode.
show platform software memory CF-809 Cisco IOS Configuration Fundamen tals Command Reference July 2008 cpp-ha-server Displays memory information for the sp ecif ied CPP High A v ailability (HA) Server process.
show platform software memory CF-810 Cisco IOS Configuration Fundamentals Command Reference July 2008 interface-manager slot Displays memory in formation for th e Interface Manager process in the specified slot .
show platform software memory CF-811 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Command Default No default beha vior or v alues. Command Modes Pri vileged EXEC (#) Diagnostic (diag) Command History logger slot Displays memory information for t he logger process in the specif ied slot .
show platform software memory CF-812 Cisco IOS Configuration Fundamentals Command Reference July 2008 Usage Guidelines The specification of the database and brief keyw ords are optional.
show platform software memory CF-813 Cisco IOS Configuration Fundamen tals Command Reference July 2008 T able 123 describes th e signif icant f ields sho wn in the brief ke yword displ ay . T able 123 sho w platf or m soft war e memory br ief Field Desc r iptions Field Description module Name of submodule.
show platform software mount CF-814 Cisco IOS Configuration Fundamentals Command Reference July 2008 show platform software mount T o display the mounted f ile syst ems, both physi cal and virt ual, f.
show platform software mount CF-815 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Users may be requested to e xecute this command to collect information abou t the underlying configuration of the platform softwa re. The RP output can dif fer depending on ho w the rou ter was booted, and whether there are USB de vices inserted.
show platform software mount CF-816 Cisco IOS Configuration Fundamentals Command Reference July 2008 /dev/mtdblock1 484 1564 24% /obfl automount(pid4004) 0 0 - /vol T able 124 describes th e signif icant fi elds sho wn in the SIP slot ( 0 , 1 , or 2 ) displays.
show platform software mount CF-817 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Mount point: automount(pid3199) Type : autofs Location : /misc1 Options : rw,fd=5,pgrp=3199,timeout=60,minproto=2,maxproto=4,indirect T able 125 describes th e signif icant f ields sho wn in the brief ke yword displ ay .
show platform software process list CF-818 Cisco IOS Configuration Fundamentals Command Reference July 2008 show platform software process list T o display a list of the processes running in a gi ve n slot, use the sho w platform softwar e process list command in pri vile ged EXEC or diagnost ic mode.
show platfo rm software pr ocess list CF-819 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Examples The followi ng example d isplays information about running processes for Ci sco .
show platform software process list CF-820 Cisco IOS Configuration Fundamentals Command Reference July 2008 The following example displays informatio n about a specific named process for Cisco ASR 100.
show platfo rm software pr ocess list CF-821 Cisco IOS Configuration Fundamen tals Command Reference July 2008 The follo wing e xample displays process summary informatio n for Cisco ASR 1000 Series S.
show platform software process list CF-822 Cisco IOS Configuration Fundamentals Command Reference July 2008 Slab : 73760 VMmalloc Chunk : 426840 VMmalloc Total : 474856 VMmalloc Used : 47372 Writeback : 0 Swap (kB) Total : 0 Used : 0 Free : 0 Cached : 0 Buffers (kB) : 6144 Load Average 1-Min : 0.
show platfo rm software pr ocess list CF-823 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Inacti ve Memory (in ki lobytes) that has been less recently used. It is more eligible to be reclai med for other purposes. Inact-dirty Memor y (in kiloby tes) that may need to be writt en to persistent store (cache or disk ).
show platform software process list CF-824 Cisco IOS Configuration Fundamentals Command Reference July 2008 VMalloc Chun k Largest contiguous block of available virtual address space (in kilobytes) t hat is free. VMalloc T otal T otal amount of memory (in kilob ytes) of total allocat ed virtual address space.
show platform software tech-suppo rt CF-825 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show platform software tech-support T o display system info rmation or create a technical .
show platform software tech-su pport CF-826 Cisco IOS Configuration Fundamentals Command Reference July 2008 Command History Usage Guidelines If the f ile ke yword is specif ied, the specif ication of the bootflash: or harddisk: keyword and filename is requi red.
show power CF-827 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show power T o display informati on about the po wer status, use the sho w power command in user EXEC or pri vileged EXEC mode .
show power CF-828 Cisco IOS Configuration Fundamentals Command Reference July 2008 Usage Guidelines The interface-nu mber argument designat es the module and port number . V alid v alues for interface-nu mber depe nd on the specified inte rface type and the ch assis and module that are used.
show power CF-829 Cisco IOS Configuration Fundamen tals Command Reference July 2008 3 WS-X6516-GBIC 118.02 2.81 118.02 2.81 on on 5 WS-C6500-SFM 117.18 2.79 117.18 2.79 on on 7 WS-X6516A-GBIC 214.20 5.10 - - on off (insuff cooling capacity) 8 WS-X6516-GE-TX 178.
show power CF-830 Cisco IOS Configuration Fundamentals Command Reference July 2008 FastEthernet9/1 auto on 6300 Cisco 6500 IP Phone FastEthernet9/2 auto on 6300 Cisco 6500 IP Phone .
show proces ses CF-831 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show processes T o display info rmation about the acti v e Cisco IOS processes or the Cisco IOS Software Modularity POSIX-style processes, use the show processes command in privile ged EXEC mode.
show processes CF-832 Cisco IOS Configuration Fundamentals Command Reference July 2008 CPU utilization for five seconds: 21%/0%; one minute: 2%; five minutes: 2% PID QTy PC Runtime (ms) Invoked uSecs .
show proces ses CF-833 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Note Because platforms have a 4- to 8-millisecond clock resolution , run times are considered reliable only after a large n umber of in v ocations or a reaso nable, measured run time.
show processes CF-834 Cisco IOS Configuration Fundamentals Command Reference July 2008 Age: 662314 msec, Runtime: 3841 msec State: Running, Priority: Normal T able 131 describes th e field s sho wn in the display .
show proces ses CF-835 Cisco IOS Configuration Fundamen tals Command Reference July 2008 1 4 11 Receive 1 0 (128K) 1.848 procnto-cisco 1 5 63 Receive 1 0 (128K) 0.000 procnto-cisco 1 6 63 Receive 1 0 (128K) 0.000 procnto-cisco 12290 1 10 Receive 1 12288(128K) 0.
show processes CF-836 Cisco IOS Configuration Fundamentals Command Reference July 2008 12330 2 10 Receive 1 36864(128K) 0.004 cdp2.iosproc 12330 3 10 Receive 1 36864(128K) 0.024 cdp2.iosproc 12330 4 11 Nanosleep 36864(128K) 0.000 cdp2.iosproc 12330 5 10 Reply 1 36864(128K) 0.
show processes cpu CF-837 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show processes cpu T o display detai led CPU utilization statistics (C PU use per process) when Cisco IOS or Cisco IOS Software Modularit y images are running, use the show processes cpu command in pri vileged EXEC mode.
show processes c pu CF-838 Cisco IOS Configuration Fundamentals Command Reference July 2008 Maximum usage is measured and reco rded every second; a verage usage is calculated on period s of more than one second.
show processes cpu CF-839 Cisco IOS Configuration Fundamen tals Command Reference July 2008 90 80 * * * * * * * * 70 * * ***** * ** ***** *** **** ****** * ******* * * 60 #***##*##*#***#####*#*###****.
show processes c pu CF-840 Cisco IOS Configuration Fundamentals Command Reference July 2008 Note Because platforms have a 4- to 8-millisecond clock resolut ion, run times are considered reliable on ly after se veral in v ocations or a reason able, measured run time.
show processes cpu CF-841 Cisco IOS Configuration Fundamen tals Command Reference July 2008 The follo wing is partial samp le output from the show processes cpu command w ith the detailed ke yword when a Software M odularity image i s running: Router# show processes cpu detailed Total CPU utilization for 5 seconds: 99.
show processes c pu CF-842 Cisco IOS Configuration Fundamentals Command Reference July 2008 21 0.0% 0.0% 0.0% 10 Receive 0.004 22 0.0% 0.0% 0.0% 10 Receive 0.000 PID/TID 5Sec 1Min 5Min Process Prio STATE CPU 8215 0.0% 0.0% 0.0% kosh.proc 0.044 1 0.0% 0.
show processes cpu CF-843 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Related Commands T able 135 show pr ocesses cpu detailed (Softw ar e Modular ity) Field Descr iptions Field Description T otal CPU utilizati on for f iv e seconds T otal CPU utilization for the last 5 seconds.
show processes inter rupt mask buffer CF-844 Cisco IOS Configuration Fundamentals Command Reference July 2008 show processes interrupt mask buffer T o display informatio n in the interrupt mask b uf fer , use the show processes interrupt mask buffer command in pri vile ged EXEC mode.
show processes interrupt mask buffer CF-845 Cisco IOS Configuration Fundamen tals Command Reference July 2008 scheduler interrupt mask time Conf igures the maximum amount of time a p rocess can run with interrupts masked.
show processes inte rrupt mask detail CF-846 Cisco IOS Configuration Fundamentals Command Reference July 2008 show processes interrupt mask detail T o display informatio n about interrupt masking, use the show processes interrupt mask detail command in pri vile ged EXEC mode.
show processes interrupt mask detail CF-847 Cisco IOS Configuration Fundamen tals Command Reference July 2008 scheduler interrupt mask size Conf igures the maximum number of entrie s that can exist in th e interrupt ma s k bu ffe r. scheduler interrupt mask time Conf igures the maximum amount of time a p rocess can run with interrupts masked.
show processes memo ry CF-848 Cisco IOS Configuration Fundamentals Command Reference July 2008 show processes memory T o sho w the amount of memory used b y each system process in Cisco IOS or Cisco IOS Softw are Modularity i mages, use the show processes memory command in pri vi leged EXEC mode.
show processes memory CF-849 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Cisco IOS Software Modularity The system memory follo wed by a one-line summary of memory informatio n about each Software Modularity process is displayed. Command Modes Pri vileged Exec (#) Com man d Hi sto ry Release Modification 10.
show processes memo ry CF-850 Cisco IOS Configuration Fundamentals Command Reference July 2008 Usage Guidelines The show processes memory command (and sho w processes memory sorted command) disp lays a summary of total, used, and free memory , followed b y a list of proc esses and their memory impact.
show processes memory CF-851 Cisco IOS Configuration Fundamen tals Command Reference July 2008 • sho w processes memory Command for Releases Prio r to 12.3(11)T , 12.2(28)S, and 12 .0(30)S • sho w processes memory Command fo r Cisco IOS Softw are Modularity show processes memory Command for Releases Prior to 12.
show processes memo ry CF-852 Cisco IOS Configuration Fundamentals Command Reference July 2008 The follo wing is sample output f rom the show processes memory command when the sorted k eyword is used. In this case, the output is sorted by the “Holding” column, f rom lar gest to smallest.
show processes memory CF-853 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Processor memory holding = 3884 bytes pc = 0x60790654, size = 3044, count = 1 pc = 0x6076DBC4, size = 652, count = 1 pc = 0x6076FF18, size = 188, count = 1 I/O memory holding = 0 bytes show processes memory Command for Releases Prior to 12.
show processes memo ry CF-854 Cisco IOS Configuration Fundamentals Command Reference July 2008 Total: 50,994,868 , Used: 6220092, Free: 44774776 PID TTY Allocated Freed Holding Getbufs Retbufs Process 0 0 6796228 627336 5325956 0 0 *Init* 0 0 200 29792 200 0 0 *Sched* 0 0 192 744 0 349000 0 *Dead* 1 0 0 0 12896 0 0 Chunk Manager .
show processes memory CF-855 Cisco IOS Configuration Fundamen tals Command Reference July 2008 T able 137 describes th e signif icant f ields sho wn in the display . The follo wing is sample outpu t from the show processes memory comman d with deta ils about th e memory of the process named cdp2.
show processes memo ry CF-856 Cisco IOS Configuration Fundamentals Command Reference July 2008 0x74175060 160 1 T able 138 describes th e signif icant f ields sho wn in the display that are dif ferent f rom T able 137 on page 855 .
show processes memory CF-857 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Address Size 0x0806FFF0 0x00000010 0x080714A8 0x00000058 0x08073E18 0x00000098 0x08073FE8 0x00000018 0x08.
show protocols CF-858 Cisco IOS Configuration Fundamentals Command Reference July 2008 show protocols T o display the conf igured pr otocols, use the show protocols comman d in EXEC mode. This command sho ws the global and in terface-specif ic status of any conf igured Le v el 3 protocol; for example, IP , DECnet, IPX, AppleT alk, and so on.
show region CF-859 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show region T o display v alid memory r egions (memory mapp ing) in use on your system, use the show r egion command in Pri vile ged EXEC mode. show re gion [ address he x-addr ess ] Syntax Descripti on Defaults All memory regions are displayed.
show region CF-860 Cisco IOS Configuration Fundamentals Command Reference July 2008 If the address reported b y the b us error does not fall wit hin the ranges displayed in the sho w region output, this means that the router wa s trying to access an address that is not valid.
show registry CF-861 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show registry T o display the functi on registry information when Cisco I OS or Cisco IOS Software Modularity images are running, use the show registry com mand in user EXEC or pri vile ged EXEC mode.
show registry CF-862 Cisco IOS Configuration Fundamentals Command Reference July 2008 Command History Examples Example output v aries between Cisco IOS softw are images and Cisco IOS Sof tware Modularity softw are images.
show registry CF-863 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Cisco IOS Software Modularity The follo wing is partial samp le output from the show r egistr y command when runn.
show relo ad CF-864 Cisco IOS Configuration Fundamentals Command Reference July 2008 show reload T o display the reload stat us on the router , use the show reload command in EXEC mode. show reload Syntax Descripti on This command has no ar guments or ke ywords.
show rom-monitor CF-865 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show rom-monitor T o sho w both the ReadOnly and the Upgrade R OM monitor (R OMMON) image vers ions in additio.
show rom-monitor CF-866 Cisco IOS Configuration Fundamentals Command Reference July 2008 Usage Guidelines Use the show rom-monitor command when you are in Cisco IO S software.
show rom-monitor slot CF-867 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show rom-monitor slot T o display the R O M monitor (R OMMON) s t at u s, use the sho w rom-monitor command in user EXEC or pri vileged EXEC mode.
show rom-monitor slot CF-868 Cisco IOS Configuration Fundamentals Command Reference July 2008 Related Commands Com ma nd De scr ipt io n upgrade rom-monitor Sets the e xecution preference on a R OMMON.
show running-config CF-869 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show running-config T o display the conten ts of the current running conf iguration file or t he configurat.
show running- config CF-870 Cisco IOS Configuration Fundamentals Command Reference July 2008 Command Default The default syntax, sh ow running-conf ig , displays the contents of the running configurati on fi le, except commands conf igured with default p arameters.
show running-config CF-871 Cisco IOS Configuration Fundamen tals Command Reference July 2008 • The show running-conf ig command does not display t his v alue.
show running- config CF-872 Cisco IOS Configuration Fundamentals Command Reference July 2008 The follo wing e xample sho ws ho w to set line numbers in th e command output and th en use the output mod.
show running-config CF-873 Cisco IOS Configuration Fundamen tals Command Reference July 2008 mls flow ip destination mls flow ipx destination cns event-service server ! spanning-tree portfast bpdu-guard spanning-tree uplinkfast spanning-tree vlan 200 forward-time 21 port-channel load-balance sdip ! ! ! shutdown ! ! .
show running- config CF-874 Cisco IOS Configuration Fundamentals Command Reference July 2008 show policy-map Displays the configuration of all classes for a specif ied service policy map or all classes for all e xisting polic y maps, and displays A TM overhead accounting information, if configured.
show running-config map-class CF-875 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show running-config map-class T o display only map-class co nfigu ration information fro m the running conf iguration f ile, use the show running-conf ig map-class command in pri vileged EXEC mode.
show running- config map-class CF-876 Cisco IOS Configuration Fundamentals Command Reference July 2008 Building configuration... Current configuration: ! map-class frame-relay cir60 frame-relay bc 160.
show running-config map-class CF-877 Cisco IOS Configuration Fundamen tals Command Reference July 2008 map-class frame-relay Specifies a map class to define QoS v alues for a Frame Relay VC. more system:running-confi g Displays contents of th e currently run ning confi guration f ile (equi v alent to the show running-conf ig co mmand.
show running- config partition CF-878 Cisco IOS Configuration Fundamentals Command Reference July 2008 show running-config partition T o display the list of commands t hat make up the current run ning.
show running-config partition CF-879 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Command Default None Command Modes Pri vileged EXEC (#) Command History Usage Guidelines When the.
show running- config partition CF-880 Cisco IOS Configuration Fundamentals Command Reference July 2008 In the follo wing e xample, only the main conf iguration p artition associated with the interface configuration is queried, and onl y the conf iguration commands associ ated with FastEthernet interface 0/1 are displayed.
show scp CF-881 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show scp T o display Switch- Module Conf iguration Protocol (SCP) informati on, use the show scp in pri vile ged EXEC mode on th e Switch Processor .
show scp CF-882 Cisco IOS Configuration Fundamentals Command Reference July 2008 6 2 Supervisor Engine 720 (Hot) WS-SUP720-3BXL SAL09148P59 Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 1 0013.
show slot CF-883 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show slot T o display information about the PCMCIA flash memory cards f ile system, use the sho w slot command in user EXEC or pri vileged EXEC mode.
show slot CF-884 Cisco IOS Configuration Fundamentals Command Reference July 2008 Note In some cases the show slot comm and will no t display the file systems, use show slot0 : or show slot1: . Examples The followi ng example d isplays information about slot 0.
show slot CF-885 Cisco IOS Configuration Fundamen tals Command Reference July 2008 The follo wing e xample sho w the flash detailed directory . Router# show slot detailed PCMCIA Slot0 flash directory: File Length Name/status addr fcksum ccksum 1 11081464 c3660-bin-mz.
show slot0: CF-886 Cisco IOS Configuration Fundamentals Command Reference July 2008 show slot0: T o display info rmation about the PCMCIA flash memo ry card’ s file system located in slot 0, use the show slot0: command in user EXEC or pri vileged EXEC mode.
show slot0: CF-887 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Router# show version . . 20480K bytes of Flash PCMCIA card at slot 1 (Sector size 128K). Note In some cases the show slot comm and will no t display the file systems, use show slot0 : or show slot1: .
show slot0: CF-888 Cisco IOS Configuration Fundamentals Command Reference July 2008 PCMCIA Slot0 flash directory: File Length Name/status addr fcksum ccksum 1 11081464 c3660-bin-mz.
show slot1: CF-889 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show slot1: T o display informat ion about the PCMCIA flash memo ry card’ s file system located in slot 1 , use the show slot1: command in user EXEC or pri vileged EXEC mode.
show slot1: CF-890 Cisco IOS Configuration Fundamentals Command Reference July 2008 Note In some cases the show slot command will not di splay the f ile systems. Use show slot0: or show slot1: . Examples The following example displays information about slot 0 using the slot0: command form.
show slot1: CF-891 Cisco IOS Configuration Fundamen tals Command Reference July 2008 File Length Name/status addr fcksum ccksum 1 11081464 c3660-bin-mz.
show stacks CF-892 Cisco IOS Configuration Fundamentals Command Reference July 2008 show stacks T o monitor the stack usage of proce sses and interrupt routi nes, use the show stacks command in EXEC mode. show stacks Syntax Descripti on This command has no ar guments or ke ywords.
show stacks CF-893 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Related Commands Com ma nd De scr ipt io n show pr ocesses Displays informat ion about the acti ve processes.
show startup-config CF-894 Cisco IOS Configuration Fundamentals Command Reference July 2008 show startup-config The more nvram:startup-config command has been replaced by the show startup-config command. See the description of the more command in the “Cisco IOS File System Comman ds” chapter for more inform ation.
show subsys CF-895 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show subsys T o display the subsyst em information, use the show subsys command i n pri vileged EXEC mod e.
show subsys CF-896 Cisco IOS Configuration Fundamentals Command Reference July 2008 Following is sample output from the show subsys command that includes the license class: Router# show subsys Name Class Version license_mgmt_local Management 1.000.001 license_admin_local Management 1.
show sup-bootflash CF-897 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show sup-bootflash T o display informat ion about the sup-bootflash file system, use the sho w sup-bootflash command in pri vileged EXEC mod e.
show sup-bootflash CF-898 Cisco IOS Configuration Fundamentals Command Reference July 2008 Length = 1000000 Sector Size = 40000 Programming Algorithm = 19 Erased State = FFFFFFFF File System Offset = .
show sup-bootflash CF-899 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Bad Sector Map Offset = 3FFF8 Length = 8 Squeeze Log Offset = F80000 Length = 40000 Squeeze Buffer Offset = .
show system jumbomtu CF-900 Cisco IOS Configuration Fundamentals Command Reference July 2008 show system jumbomtu T o display the global maxi mum transmission unit (MTU) setti ng, use the show system jumbomtu command in pri vile ged EXEC mode. show system jumbomtu Syntax Descripti on This command has no ar guments or ke ywords.
show tech-support CF-901 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show tech-support T o display general inf ormation about the router when it repo rts a problem, use the show tech-support command in pri vileged EXEC mo de.
show tech-s upport CF-902 Cisco IOS Configuration Fundamentals Command Reference July 2008 Com man d Hi sto ry Release Modification 11.2 This command wa s introduced. 11.3(7), 11.2(16) The ou tput for this command was e xpanded to sho w additional inf ormation for boot , bootflash , context , and traff ic for all enab led protocol s.
show tech-support CF-903 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Usage Guidelines T o interrupt and terminate the sho w tech-support output, simultaneously press and release the CTRL , AL T , and 6 keys.
show tech-s upport CF-904 Cisco IOS Configuration Fundamentals Command Reference July 2008 • show en vironment • sho w fabric channel-counters • show f ile systems • show interfaces • show i.
show tech-support CF-905 Cisco IOS Configuration Fundamen tals Command Reference July 2008 If you enter the ipmulticast ke yword, the o utput displays, b ut is not limited to, these show commands: •.
show tech-s upport CF-906 Cisco IOS Configuration Fundamentals Command Reference July 2008 show contr ollers tech-support Displays general information about a VIP card for problem reporting. show decnet traff ic Displays the DECnet traf fic stati stics (including datagrams sent, recei ved, and forwarded).
show usb contr ollers CF-907 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show usb controllers T o display USB host controller in formation, use the show usb contr ollers command in pri vile ged EXEC mode.
show usb contr ollers CF-908 Cisco IOS Configuration Fundamentals Command Reference July 2008 Interrupt Enable:0x196 Chip ID:0x3630 Buffer Status:0x0 Direct Address Length:0x80A00 ATL Buffer Size:0x60.
show usb device CF-909 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show usb device T o display USB d evice inf ormation, use the show usb de vice command in pri vile ged EXEC mode.
show usb devic e CF-910 Cisco IOS Configuration Fundamentals Command Reference July 2008 Configuration: Number:1 Number of Interfaces:1 Description: Attributes:None Max Power:140 mA Interface: Number:.
show usb device CF-911 Cisco IOS Configuration Fundamen tals Command Reference July 2008 T able 143 describes th e signif icant f ields sho wn in the display . T able 143 show usb device Field Descr iptions Field Description De vice handle Internal memory handle allocated to t he devi ce.
show usb driver CF-912 Cisco IOS Configuration Fundamentals Command Reference July 2008 show usb driver T o display informati on about re gistered USB class dri v ers and vendor -specif ic dri vers, use t he show usb driver co mmand in pri vileg ed EXEC mode.
show usb driver CF-913 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Subclass Code:0x6249BD58 Protocol:0x2 Interface Class Code:0x5DC0 Interface Subclass Code:0x5 Interface Protoco.
show usb po rt CF-914 Cisco IOS Configuration Fundamentals Command Reference July 2008 show usb port T o sisplay USB root hu b port informatio n , use the sho w usb port command in pri vile ged EXEC mode.
show usb tree CF-915 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show usb tree T o display informati on about the port st ate and all attached de vices, use the show usb tree command in pri vileged EXEC mod e. show usb tree Syntax Descripti on This command has no ar guments or ke ywords.
show usbtoken CF-916 Cisco IOS Configuration Fundamentals Command Reference July 2008 show usbtoken T o display informati on about the USB eT oken (such as the eT oken ID), use the show usbtoken command in pri vileg ed EXEC mode.
show usbtoken CF-917 Cisco IOS Configuration Fundamen tals Command Reference July 2008 T oken de vice name A unique name deriv ed by the to ken dri ver .
show ver sion CF-918 Cisco IOS Configuration Fundamentals Command Reference July 2008 show version T o display informatio n about the currently loaded so ft ware along with hardware and de vice infor mation, use the sh ow ver sio n command in user EXEC, pri vileged EXEC, or di agnostic mode.
show version CF-919 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Usage Guidelines This command display s information about the Cisco IOS softw are ver sion currently r unning on a.
show ver sion CF-920 Cisco IOS Configuration Fundamentals Command Reference July 2008 < router-name > uptime is < w > weeks, < d > days, < h > hours, < m > minutes System.
show version CF-921 Cisco IOS Configuration Fundamen tals Command Reference July 2008 2 FastEthernet interfaces 4 Serial interfaces DRAM configuration is 64 bits wide with parity disabled. 125K bytes of NVRAM. 16384K bytes of processor board System flash (Read/Write) Flash card inserted.
show ver sion CF-922 Cisco IOS Configuration Fundamentals Command Reference July 2008 Router# For information about PCI buses and bandw idth calculat ion, go to http://www .cisco.com/uni vercd/cc/ td/doc/product/cor e/7206/port_adp/conf ig/387 5in.htm#wp1057192.
show version CF-923 Cisco IOS Configuration Fundamen tals Command Reference July 2008 device uptime i s ... For ex am pl e: C3660-1 uptime is 1 w eek, 3 days, 6 hours, 41 minutes The amount of time th e system has be en up and running.
show ver sion CF-924 Cisco IOS Configuration Fundamentals Command Reference July 2008 Cisco platform ( pr ocesso r-type ) processor (re vision pr ocessor -r e vision-id ) with fr ee - DRAM-memory K/ pac ket-memory K b ytes of memory .
show version CF-925 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Catalyst 6500 Series Switches and Cisco 76 00 Series Routers This example shows ho w to display the configuration .
show ver sion CF-926 Cisco IOS Configuration Fundamentals Command Reference July 2008 Configuration register is 0x2102 Router# T able 147 describes th e fields that are shown in the e xample. The output of the show ve rsion EXEC command can provide certain messages, such as bus error messages.
show version CF-927 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Wed 02-Feb-00 16:49 by ccai Image text-base:0x60008900, data-base:0x61192000 ROM:System Bootstrap, Version 12.
show ver sion CF-928 Cisco IOS Configuration Fundamentals Command Reference July 2008 Cisco uBR10012 Router The follo wing e xample sho ws sample output fro m the sho w version command on a Cisco uBR10012 uni versal broadban d router running Cisco IOS Release 12.
show version CF-929 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Cisco ASR 1000 Series Routers In the follo wing example, the show version installed command is entered on a Cisco ASR 1000 Series Router in diagnostic mode.
show ver sion CF-930 Cisco IOS Configuration Fundamentals Command Reference July 2008 File SHA1 checksum: 7f7f87f2c198c38e7b58214478c5b28ee3c7b567 Package: rpcontrol, version: v122_33_xn_asr_rls0_throttle, status: inactive File: bootflash:asr1000rp1-rpcontrol.
show version CF-931 Cisco IOS Configuration Fundamen tals Command Reference July 2008 File: bootflash:asr1000rp1-sipspa.v122_33_xn_asr_rls0_throttle.pkg, on: CC1/2 Built: 2007-11-11_17.
show ver sion CF-932 Cisco IOS Configuration Fundamentals Command Reference July 2008 File SHA1 checksum: 7f7f87f2c198c38e7b58214478c5b28ee3c7b567 Package: rpcontrol, version: v122_33_xn_asr_rls0_throttle, status: inactive File: bootflash:asr1000rp1-rpcontrol.
show version CF-933 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Package: rpios-advipservicesk9, version: unknown, status: active File: unknown, on: CC0/1 Built: 2007-11-11_17.16, by: mcpre File SHA1 checksum: unknown Package: rpios-advipservicesk9, version: unknown, status: active File: unknown, on: CC0/2 Built: 2007-11-11_17.
show ver sion CF-934 Cisco IOS Configuration Fundamentals Command Reference July 2008 File SHA1 checksum: unknown Router# In the follo wing example, t he show version runn ing command is entered to vie w which su b-packages are activ e on which hardware elements on the router .
show version CF-935 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Package: sipspa, version: v122_33_xn_asr_rls0_throttle, status: active File: bootflash:asr1000rp1-sipspa.v122_33_xn_asr_rls0_throttle.pkg, on: CC1/0 Built: 2007-11-11_17.
show warm-re boot CF-936 Cisco IOS Configuration Fundamentals Command Reference July 2008 show warm-reboot T o display the stat istics for attempted w arm reboots, use the sho w warm-reboot command in pri vileg ed EXEC mode. show warm-r eboot Syntax Descripti on This command has no ar guments or ke ywords.
show whoami CF-937 Cisco IOS Configuration Fundamen tals Command Reference July 2008 show whoami T o display informatio n about the terminal line of the cu rrent user , including host name, line n umber , line speed, and location, use the show whoami command in EXEC mode.
showmon CF-938 Cisco IOS Configuration Fundamentals Command Reference July 2008 showmon T o sho w both the ReadOnly and the Upgrade R OMmon image versions when you are i n R OMmon mode, as well as which R OMmon i mage is running on the Cisco 720 0 VXR or Cisco 7301 router , use the showmon command in R OM monitor mode.
showmon CF-939 Cisco IOS Configuration Fundamen tals Command Reference July 2008 Related Commands Com ma nd De scr ipt io n rommon-pr ef Selects a ReadOnly or Upgrade R OMmon image to be booted on the ne xt reload of a Cisco 7200 VXR or Cisco 73 01 when you are in R OMmon.
Ein wichtiger Punkt beim Kauf des Geräts Cisco Systems 12000 series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cisco Systems 12000 series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cisco Systems 12000 series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cisco Systems 12000 series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cisco Systems 12000 series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cisco Systems 12000 series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cisco Systems 12000 series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cisco Systems 12000 series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cisco Systems 12000 series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
