Benutzeranleitung / Produktwartung 1010 Series des Produzenten Cisco Systems
Zur Seite of 30
Corporate Headquarters: Copyright © 20 03 Cisco Systems, Inc. All rights reserved. Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Regulatory Compliance and Safety Information.
2 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation • Related Documentation, page 26 • Obtaining Documentation, page 27 .
3 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Rack-Mounting the System A rack-mount kit and cable guides come with the system. The kit is not suitable for racks with obstructions (such as a power strip) that could impair access to system components.
4 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Figur e 1 Catalyst 8540 Chassis Standard Equipment Rac k Dimensions 79100 17.
5 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Figur e 2 Catalyst 851 0 and LightStr eam 1 0 1 0 Chassis Standard Equipment Rac k Dimensions • Ensure that the weight of the chassis does not make the rack unstable.
6 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Figure 3 shows the number of people needed to lift the system by weight.
7 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Using Redundant Power If your system includes an optional redundant (second) power supply , connect each of the two power supplies to dif ferent input po wer sources.
8 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Disconnecting Power Follo w these guidelines when disconnecting power: • Locate the emergenc y power-of f switch for the room before working with the system.
9 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance • Direct the f low of cooling air through the chassis •.
10 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance T able 2 lists the NEBS and ETSI specif ications that the Catalyst 8500 MSR, Catalyst 8500 CSR, and LightSteam 1010 series switches are designed to meet.
11 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance CS-03 Certification The T1 IMA interface module is CS-03 certif ied. See T able 4 for CS-03 approv al details for the equipment.
12 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance JATE The T1 IMA interface module meets the requirements of the Japan Appro v als Institute for T elecommunications Equipment (J A TE).
13 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance EMC Environmental Conditions in the European Union This eq.
14 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance Canada Class A Warning Warning This Class A digital apparatus complies with Canadian ICES-003. Cet appareil num è rique de la classe A est conforme á la norme NMB-003 du Canada.
15 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance Class A Notice for Hungary Korean Class A Warning Warning This equipment is a class A product and should be used and installed properly according to the Hungarian EMC Class A requirements (MSZEN55022).
16 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Translated Safety Warnings This section includes translations in multiple languages of the warnings that may appear in the Catalyst 8500 MSR, Catalyst 8500 CSR, and LightSteam 1010 series switch product documents.
17 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr . Sie bef inden sich in einer Situation, die zu V erletzungen führen kann.
18 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings V arning! VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du bef inner dig i en situation som kan leda till personskada.
19 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Backplane Voltage Warning Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when servicing.
20 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Ground Conductor Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor .
21 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Restricted Area Warning Warning This unit is intended for installation in restricted access areas.
22 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Qualified Personnel Warning Avvertenza Questa unità deve essere installata in un'area ad accesso limitato.
23 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Warning Definition V arning Denna utrustning ska endast installeras och bytas ut av utbildad och kvalificerad personal.
24 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Warnung Dieses Warnsymbol bedeutet Gefahr . Sie bef inden sich in einer Situation, die zu einer Körperverletzung führen könnte.
25 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Disconnect Device Warning Laser Radiation Warning Warning A readily accessible two-poled disconnect device must be incorporated in the fixed wiring.
26 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Related Documentation Related Documentation The follo wing sections describe the documentation av ailable for the Catalyst 8510 and the LightStream 1010 A TM switch.
27 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Obtaining Documentation This document should be used in conjunction with the documents lis.
28 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Obtaining Technical Assistance Documentation CD-ROM Cisco documentation and additional literature are av ailable in a Cisco Documentation CD-R OM package, which may hav e shipped with your product.
29 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Obtaining Technical Assistance Cisco TAC Website The Cisco T AC website ( http://www .cisco.com/tac ) provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies.
30 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Obtaining Additional Publications and Information Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is a vailable from v arious online and printed sources.
Ein wichtiger Punkt beim Kauf des Geräts Cisco Systems 1010 Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cisco Systems 1010 Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cisco Systems 1010 Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cisco Systems 1010 Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cisco Systems 1010 Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cisco Systems 1010 Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cisco Systems 1010 Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cisco Systems 1010 Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cisco Systems 1010 Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
