Benutzeranleitung / Produktwartung CHEROKEE SRT8OWNE des Produzenten Chrysler
Zur Seite of 407
Cherokee SRT8 O W N E R ’ S M A N U A L 2010 Grand.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............
.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 Rollover W arning ....................... 4 䡵 How T o Use This Manual .................. 5 䡵 W arnings And Cautions ................... 7 䡵 V ehicle Identification Number .
INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
control. Failur e to operate this vehicle safely may result in an accident, rollover of the vehicle, and sever e or fatal injury . Drive carefully . Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury . In fact, the U.
6 INTRODUCTION.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 2 ▫ W ireless Ignition Node (WIN) ............ 1 2 ▫ K e y F O B ........................... 1 3 ▫ Removing Key FOB From Ignition ......... 1 3 ▫ Key-In-Ignition Reminder .
▫ Remote Open W indow Feature — If Equipped ........................... 2 1 ▫ Using The Panic Alarm ................. 2 2 ▫ Programming Additional T ransmitters ...... 2 2 ▫ T ransmitter Battery Replacement .......... 2 2 ▫ General Information .
▫ Seat Belts And Pregnant W omen .......... 4 4 ▫ Seat Belt Extender ..................... 4 4 ▫ Supplemental Restraint Systems (SRS) — Airbags ............................ 4 5 ▫ Advanced Front Airbag Featur es .......... 4 7 ▫ Airbag Deployment Sensors And Controls .
A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the Key Fob into the ignition switch with either side up.
Key Fob The Key Fob operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key , which stores in the r ear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the RKE transmitter go dead.
NOTE: • If you try to remove the Key Fob befor e you place the shift lever in P ARK, it may become trapped tempo- rarily in the ignition switch. If this occurs, rotate the key to the right slightly , then remove the Key Fob as described.
Key-In-Ignition Reminder Opening the driver’s door when the Key Fob is in the ignition and the ignition switch position is OFF or ACC, sounds a signal to remind you to r emove the Key Fob. NOTE: The Key-In-Ignition reminder only sounds when the Key Fob is placed in the OFF or ACC ignition position.
NOTE: The Sentry Key 威 Immobilizer system is not compatible with aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security pr otection. All of the Key Fobs provided with your new vehicle have been programmed to the vehicle electr onics.
General Information The Sentry Key 威 system complies with FCC rules Part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interfer ence that may cause undes- ired operation.
V ehicle Security Light (located in the instrument cluster) will flash rapidly for about 16 seconds to signal that the V ehicle Security Alarm is arming.
NOTE: None of the courtesy lights will operate if the dimmer control is in the “defeat” position (extr eme downward position), unless the over head map/reading lights are turned on manually .
Remote Key Unlock, Driver Door/All Doors First Press This feature lets you pr ogram the system to unlock either the driver’s door or all doors, on the first press of the UNLOCK button on the RKE transmitter .
Sound Horn with Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter . This feature can be turned on or off.
Using the Panic Alarm T o turn the Panic Alarm featur e on or off, pr ess and hold the P ANIC button on the RKE transmitter for at least one second and release. When the Panic Alarm is on, the headlights and park lamps will flash, the horn will pulse on and off, and the interior lights will turn on.
2. Remove and replace the battery . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. Reposition the access door panel over the battery opening and snap into place.
1. A weak battery in the RKE transmitter . The expected life of the battery is a minimum of three years. 2. Closeness to a radio transmitter such as a radio station tower , airport transmitter , and some mobile or CB radios.
W ARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Mon- oxide (CO) which is odorless and colorless. Car- bon Monoxide is poisonous and can cause serious injury or death when inhaled. • Keep Remote Keyless Entry (RKE) transmitters away from children.
NOTE: T o avoid unintentional shutdowns, the system will disable the one time press of the REMOTE ST ART button for two seconds after receiving a valid Remote Start request.
W ARNING! (Continued) • When leaving the vehicle, always remove the key from the ignition and lock your vehicle. Do not leave unattended children in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe personal in- juries and death.
The rear doors cannot be opened fr om inside the vehicle until you pull up the lock plungers. Automatic Unlock On Exit Feature — If Equipped If Auto Unlock is enabled, this featur e will unlock all the doors when the driver’s door is opened if the vehicle is stopped and in P ARK or NEUTRAL.
WINDOWS Power Windows The power window controls ar e located on the driver’s door trim panel. There is a single switch on the fr ont passenger door/rear doors which operates the fr ont passenger/rear passenger door windows. The window controls will operate only when the ignition switch is in the ON or ACCESSOR Y position.
Auto-Down Both the driver and front passenger window switches have an “Auto-Down” feature. Pr ess the window switch past the first detent, release, and the window will go down automatically . T o cancel the “Auto-Down” move- ment, operate the switch in either the up or down direction and r elease the switch.
Resetting the Auto Up Feature Should the Auto Up feature stop working, the window probably needs to be r eset. T o reset Auto Up: Pull the window switch up and close the window com- pletely , then pull and hold the switch for one second.
Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
W ARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. Y ou and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • The tailpipes may be hot and you could be seri- ously injured if you come into contact with them.
Once the liftgate flipper glass has been opened, connec- tion to the rear window wiper is interr upted, preventing activation of the rear wiper blade while the flipper glass is open. NOTE: If a malfunction to the liftgate latch should occur , an emergency liftgate latch r elease can be used to open the liftgate.
• Front seat belts incorporate pr etensioners to enhance occupant protection by managing occupant ener gy during an impact event — if equipped If you will be carrying children too small for adult-.
ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seating positions in your vehicle have combination lap/shoulder belts. The belt webbing retractor is de- signed to lock during very sudden stops or collisions.
W ARNING! (Continued) • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
W ARNING! (Continued) • A belt that is worn under your arm is very danger - ous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones.
5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The r etractor will withdraw any slack in the belt. 6. T o release the belt, push the r ed button marked PRESS on the buckle. The belt will automatically retract to its stowed position.
Adjustable Upper Shoulder Belt Anchorage In the front seating positions, the shoulder belt can be adjusted upward or downwar d to position the belt away from your neck. Pr ess the release button to r elease the anchorage, and then move it up or down to the position that serves you best.
W ARNING! • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Re- tractor (ALR) feature or any other seat belt func- tion is not working properly when checked ac- cording to the procedures in the Service Manual.
Seat Belt Pretensioners — If Equipped The seat belts for both front seating positions may be equipped with pretensioning devices that ar e designed to remove slack fr om the seat belt in the event of a collision. These devices improve the performance of the seat belt by assuring that the belt is tight about the occupant early in a collision.
1. T urn the ignition switch to the OFF position, and buckle the driver’s seat belt. 2. T urn the ignition key to the ACC/ON position (do not start the engine), and wait for the Seat Belt Reminder Light to turn off.
W ARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed.
NOTE: These airbags are certified to the new Federal regulations for Advanced Airbags. The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have differ ent rates of inflation based on the severity and type of collision.
Advanced Front Airbag Features The Advanced Front Airbag system has multistage driver and front passenger airbags. This system pr ovides output appropriate to the severity and type of collision as determined by the Occupant Restraint Controller (ORC), which may receive information fr om the impact sensors at the front of the car .
Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped SABIC airbags offer side-impact and vehicle r ollover protection to fr ont and rear seat outboar d occupants in addition to that provided by the body str ucture.
NOTE: • Should a vehicle rollover occur , the pretensioners and/or SABIC airbags on both sides of the vehicle may deploy . • Airbag covers may not be obvious in the interior trim; but they will open during airbag deployment.
Along with seat belts and pretensioners, Advanced Front Airbags work with the knee bolsters to provide impr oved protection for the driver and fr ont passenger .
Do not lean against the door . If your vehicle has side airbags, and deployment occurs, the side airbags will inflate forcefully into the space between you and the door . If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center .
ORC deploys the Advanced Fr ont Airbags, SABIC air- bags — if equipped, and front seat belt pr etensioners — if equipped, as requir ed, depending on severity and type of impact.
The ORC contains a backup power supply system that may deploy the airbags even if the battery loses power or it becomes disconnected prior to deployment. Also, the ORC turns on the Airbag W arning Light in the instrument panel for appr oxi- mately six to eight seconds for a self-check when the ignition is first turned on.
of the way as the bags inflate to their full size. The bags fully inflate in about 50 to 70 milliseconds. This is about half of the time it takes to blink your eyes. The bags then quickly deflate while helping to restrain the driver and front passenger .
Front and Side Impact Sensors In front and side impacts, impact sensors aid the ORC in determining appropriate r esponse to impact events. Ad- ditional sensors in the ORC determine the level of airbag deployment and provide verification.
However , if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately . • As the airbags deflate, you may see some smoke-like particles. The particles are a normal by-pr oduct of the process that generates the non-toxic gas used for airbag inflation.
Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you.
Airbag W arning Light Y ou will want to have the airbags ready to inflate for your protection in a collision. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an authorized dealer service the system immediately .
2. Under certain circumstances, EDR data may not be recor ded (e.g., loss of battery power). In conjunction with other data gathered during a com- plete accident investigation, the electronic data may.
3. Requested by police under a legal warrant. 4. Otherwise required by law . Data parameters that are r ecorded: • Diagnostic trouble code(s) and warning light status for electronically-contr olled .
W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a projectile inside the vehicle. The force required to hold even an infant on your lap can become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured.
W ARNING! (Continued) • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint.
belt tight; however , any seat belt system will loosen with time, so check the belt occasionally and pull it tight if necessary). For the second row center seat belt with the automatic locking retract.
Older Children and Child Restraints Children who weigh mor e than 20 lbs (9 kg), and who are older than one year , can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing dir ection are for childr en who weigh 20 to 40 lbs (9 to 18 kg), and who are older than one year .
LA TCH — Child Seat Anchorage System (Lower Anchors and T ether for CHildren) Y our vehicle’s rear seat is equipped with the child restraint anchorage system called LA TCH.
If you are installing LA TCH-compatible child restraints in adjacent rear seating positions, you can use the LA TCH anchors or the vehicle’s seat belt for the outboard position, but you must use the vehicle’s seat belt at the center position.
In addition, there ar e tether strap anchorages behind each rear seating position located on the back of the seat. Many , but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap.
W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint.
plate into the buckle again. If you still can’t make the child restraint secur e, try a differ ent seating position. T o attach a child restraint tether strap: Route the tether strap over the seatback and attach the hook to the tether anchor located on the back of the seat.
W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. T ransporting Pets Airbags deploying in the front seat could harm your pet.
A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the br eak-in and not inter- preted as an indication of dif ficulty . SAFETY TIPS T ransporting Passengers NEVER TRANSPOR T P ASSENGERS IN THE CARGO AREA.
Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area. If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling contr ols to force outside air into the vehicle.
Airbag W arning Light The light should come on and remain on for six to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not lit during starting, see your authorized dealer . If the light stays on, flickers, or comes on while driving, have the system checked by an autho- rized dealer .
.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 8 0 ▫ Automatic Dimming Mirror .............. 8 0 ▫ Outside Mirrors ...................... 8 1 ▫ Outside Mirrors Folding Featur e .......... 8 1 ▫ Driver’s Automatic Dimming Mirrors — If Equipped .
▫ Head Restraints ...................... 8 7 ▫ Front Heated Seats — If Equipped ......... 8 8 ▫ Rear Heated Seats — If Equipped .......... 9 0 ▫ 60/40 Split Rear Seat ................... 9 1 䡵 Driver Memory Seat — If Equipped .........
▫ Lane Change Assist ................... 1 0 6 ▫ High/Low Beam Switch ............... 1 0 6 ▫ Flash-T o-Pass ....................... 1 0 6 ▫ Headlight T ime Delay ................. 1 0 7 ▫ Interior Lights ...................... 1 0 7 ▫ Front Map/Reading Lights .
▫ Cleaning Parksense 威 .................. 1 2 2 ▫ System Usage Precautions .............. 1 2 2 䡵 Parkview 威 Rear Back Up Camera — If Equipped ............................ 1 2 5 ▫ T urning Parkview 威 On Or Off — W ith Navigation/Multimedia Radio .
▫ W ind Buffeting ...................... 1 3 7 ▫ Sunroof Maintenance ................. 1 3 7 ▫ Ignition Off Operation ................. 1 3 7 ▫ Sunroof Fully Closed .................. 1 3 7 䡵 Electrical Power Outlets ................. 1 3 7 䡵 Power Inverter — If Equipped .
MIRRORS Automatic Dimming Mirror This mirror automatically adjusts for headlight glar e from vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirror . A light next to the button will illuminate to indicate when the dimming feature is activated.
Outside Mirrors T o receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror . W ARNING! V ehicles and other objects seen in the passenger-side convex mirror will look smaller and farther away than they really are.
Power Outside Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror , right mirror or off position. After selecting a mirror , move the knob in the same direction you want the mirr or to move.
Illuminated V anity Mirrors — If Equipped T o access an illuminated vanity mirror , flip down one of the sun visors. Lift the cover to reveal the mirr or . The light will turn on automatically . Uconnect™ Phone — IF EQUIPPED Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details.
W ARNING! (Continued) • Be sure everyone in your vehicle is in a seat and using a seat belt properly . Front Manual Seat Adjustment Move the seat forward or r earward using the adjustment bar . Lift up on the bar located on the front of the seat near the floor .
Manual Lumbar Support Adjustment The manual lumbar support adjustment lever is located on the right side of the driver’s seatback (all models) and on the left side of the passenger’s seatback (if equipped). Moving the lumbar control lever forwar d and rearwar d will increase or decr ease the lumbar support.
W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked.
CAUTION! DO NOT place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’ s path. Head Restraints Head restraints can r educe the risk of injury in the event of a rear impact.
W ARNING! Driving a vehicle with the head restraints removed or improperly adjusted could cause serious injury or death in the event of a collision. The head restraints should always be checked prior to operating the vehicle and never adjusted while the vehicle is in motion.
NOTE: Once a heat setting is selected, heat will be felt within two to five minutes. W ARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, ex- haustion or other physical condition must exercise care when using the seat heater .
Rear Heated Seats — If Equipped On vehicles equipped with rear heated seats, the seats closest to the doors are heated. The contr ols for these seats are located on the r ear of the center console. After turning the ignition ON, you can choose from High, Low or Off heat settings.
NOTE: Once a heat setting is selected, heat will be felt within two to five minutes. W ARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, ex- haustion or other physical condition must exercise care when using the seat heater .
1. Pull the release strap (toward the fr ont of the vehicle) to release. NOTE: Do not fold the rear seat down with the center seat belt buckled. 2. Fold the rear seat completely forward. T o Raise Rear Seat Raise the rear seatback and lock it into place.
W ARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury .
Press the latch and lift the top of the armr est to access the storage bin. DRIVER MEMOR Y SEA T — IF EQUIPPED Once programmed, the memory buttons 1 and 2 on the driver’s door panel can be used to recall the driver’s seat, driver’s outside mirror , adjustable brake and accelerator pedals and radio station preset settings.
Y our vehicle is equipped with two RKE transmitters. One or both RKE transmitters can be linked to either memory position. The memory system can accommodate up to four RKE transmitters, each one linked to either of the two memory positions.
10. Insert the ignition key , and turn the ignition switch to the ON position. 1 1. Select ⬙ Remote Linked to Memory ⬙ in the Electr onic V ehicle Information Center (EVIC) and enter ⬙ Ye s ⬙ .
2. Pr ess and release MEMOR Y button number 1. The system will recall any memory settings stor ed in position 1. W ait for the system to complete the memory recall before continuing to Step 3. 3. Press and release the memory S (SET) button located on the driver’s door .
driving position when the key is placed into the ignition, and turned out of the LOCK position toward the ACC/ON position. The Easy Entry/Exit feature will be automatically dis- abled if the seat is already positioned closer than 0.9 in (23 mm) forward of the r ear stop.
2. Reach under the hood, move safety latch to the left and lift the hood. CAUTION! T o prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. W ARNING! Be sure the hood is fully latched before driving your vehicle.
LIGHTS Multifunction Lever The multifunction lever controls the operation of the headlights, turn signals, headlight beam selection, instru- ment panel light dimming, passing light, interior courtesy/ dome lights and optional fog lights. The multifunction lever is located on the left side of the steering wheel.
Automatic Headlights — If Equipped T urn the end of the multifunction lever to the third detent (AUTO) to activate the Automatic Headlight system. This system performs two functions. W ith the engine running and the multifunction lever in the AUTO posi- tion, the headlights will turn on and off based on the surrounding light levels.
approximately four minutes after the wipers completely stop. Refer to “W indshield W ipers and W ashers” in this section for further information. NOTE: When your headlights come on during the daytime, the instrument panel lights will automatically dim to the lower nighttime intensity .
NOTE: Broken, muddy , or obstructed headlights and taillights of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). Also, dirt, film, and other obstructions (sticker , toll box, etc.) on the windshield or camera lens will cause the system to function improperly .
Rotate the center portion of the lever upward to the last detent to turn on the interior lighting. Battery Saver Feature If the multifunction lever is left in the interior light position, parking ligh.
Fog Lights — If Equipped The fog light switch is located in the multifunction lever . T o activate the fog lights, turn on the park/ turn lights, low beam headlights or the Automatic Headlights and pull out the end of the multifunction lever . A light in the instrument cluster shows when the fog lights are on.
T urn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the fr ont and rear turn signal lights. NOTE: If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb.
Headlight Time Delay This feature delays turning of f the headlights for 30, 60 or 90 seconds after the ignition switch is turned OFF . T o activate the headlight delay , the multifunction lever must be rotated to the “Of f” position after the ignition switch is turned to LOCK/ACC.
Front Map/Reading Lights These lights are mounted in the over head console. Each light can be turned on by pressing the r ecessed area of the lens. T o turn these lights off, press the r ecessed area of the lens a second time. There ar e also reading lights located above the rear doors.
WINDSHIELD WIPERS AND W ASHERS The windshield wiper/washer control lever is located on the right side of the steering column. The front wipers ar e operated by rotating a switch, located on the end of the lever . For information on the rear wiper/washer , refer to “Rear W indow Features” in “Understanding the Features of Y our V ehicle”.
CAUTION! Always remove any buildup of snow that prevents the windshield wiper blades from returning to the “park” position. If the windshield wiper switch is turned off, and the blades cannot return to the “park” position, damage to the wiper motor may occur .
Windshield W asher Operation T o use the washer , pull the lever toward you and hold while spray is desired. If the lever is pulled while in the delay range, the wiper will operate for several wipe cycles after the lever is released, and then r esume the intermittent interval previously selected.
Rain Sensing Wipers — If Equipped This feature senses moistur e on the windshield and automatically activates the wipers for the driver . The feature is especially useful for r oad splash or overspray from the windshield washers of the vehicle ahead.
• T ransmission in NEUTRAL Position — When the ignition is ON, and the transmission is in the NEU- TRAL position, the Rain Sensing system will not operate until the wiper switch is moved, vehicle speed is greater than 5 mph (8 km/h), or the shift lever is moved out of the NEUTRAL position.
W ARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle.
• The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in REVERSE (R) or when the Electronic Speed Contr ol is on.
ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, Electronic Speed Contr ol takes over accelerator operations at speeds greater than 25 mph (40 km/h).
W ARNING! Leaving the Electronic Speed Control System on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the system OFF when you are not using it.
T o decrease speed while the Electronic Speed Contr ol is set, push down and hold the SET DECEL lever . If the lever is continually held in the SET DECEL position, the set speed will continue to decrease until the lever is released. Release the lever when the desir ed speed is reached, and the new set speed will be established.
P ARKSENSE 姞 REAR P ARK ASSIST — IF EQUIPPED ParkSense 威 provides visible and audible indications of the distance between the rear fascia and the detected obstacle when backing up. Refer to the W arning Section and Note Section for limitations of this system and recommendations.
ParkSense 姞 W arning Display The ParkSense 威 warning display , located in the headliner near the flipper glass, provides both visible and audible warnings to indicate the distance between the rear fascia and the detected obstacle.
W ARNING DISPLA Y DIST ANCES DISPLA Y LED OBST ACLE DIST ANCE FROM: LED COLOR AUDIBLE SIGNAL REAR CORNERS REAR CENTER 1st LED 59 in (150 cm) Y ellow Y es, Half Second 2nd LED 51 in (130 cm) Y ellow None 3rd LED 45 in (1 15 cm) Y ellow None 4th LED 31.
When the switch is pressed to disable the system, the instrument cluster will display the “P ARK ASSIST DIS- ABLED” message. Refer to “Electronic V ehicle Informa- tion Center (EVIC)” in “Understanding Y our Instrument Panel” for further information.
• When you turn ParkSense 威 off, the instr ument cluster will display “P ARK ASSIST DISABLED.” Further - more, once you turn ParkSense 威 of f, it remains of f until you turn it on again, even if you cycle the ignition key .
CAUTION! • ParkSense 威 is only a parking aid and it is unable to recognize every obstacle, including small ob- stacles. Parking curbs might be temporarily de- tected or not detected at all. Obstacles located above or below the sensors will not be detected when they are in close proximity .
W ARNING! (Continued) • Before using the ParkSense 威 Rear Park Assist System, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the vehicle when the vehicle is not used for towing.
CAUTION! • T o avoid vehicle damage, ParkV iew 威 should only be used as a parking aid. The ParkV iew 威 camera is unable to view every obstacle or object in your drive path. • T o avoid vehicle damage, the vehicle must be driven slowly when using ParkV iew 威 to be able to stop in time when an obstacle is seen.
T urning ParkView 姞 On or Off — W ithout Navigation/Multimedia Radio 1. Press the “menu” hard key . 2. Select “system setup” soft key . 3. Enable or disable the rear camera feature by selecting “enable rear camera in r everse” soft key .
Press the lens to turn these lights on. Pr ess a second time to turn the lights off. The lights also turn on when a front door or r ear door is opened. The lights will also turn on when the UNLOCK button on the Remote Keyless Entry (RKE) transmitter is pressed.
NOTE: HomeLink 威 is disabled when the V ehicle Secu- rity Alarm is active. W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people, pets or other objects are in the path of the door or gate.
HomeLink 威 for more ef ficient training and accurate transmission of the radio-frequency signal. Y our vehicle should be parked outside of the garage while training. 1. T urn the ignition switch to the ON/RUN position. 2. Place the handheld transmitter 1 to 3 in (3 to 8 cm) from the HomeLink 威 buttons while keeping the EVIC display in view .
NOTE: After training a HomeLink 威 channel, if the garage door does not operate with HomeLink 威 and the garage door opener was manufactured after 1995, the garage door opener may have rolling code. If so, pr oceed to the heading “Programming A Rolling Code System.
7. Return to the vehicle and press the programmed HomeLink 威 button twice (holding the button for two seconds each time). If the device is plugged in and activates, programming is complete. If the device does not activate, press the button a thir d time (for two seconds) to complete the training.
Then proceed with Step 4 under “Pr ogramming HomeLink 威 ” earlier in this section. Using HomeLink 姞 T o operate, press and release the pr ogrammed HomeLink 威 button. Activation will now occur for the trained device (i.e., garage door opener , gate operator , security system, entry door lock, home/office lighting, etc.
• Press the LEARN button on the garage door opener to complete the training for rolling code. • Did you unplug the device for training and remember to plug it back in? If you are having any pr oblems or requir e assistance, please call toll-free 1–800–355–3515 or , on the Internet at www .
POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch.
Opening Sunroof — Express Press the switch r earward and r elease, and the sunroof will open automatically from any position. The sunr oof will open fully , then stop automatically . This is called “Express Open”. During Expr ess Open operation, any movement of the sunroof switch will stop the sunr oof.
NOTE: The sunshade cannot be closed if the sunroof is open. Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
NOTE: • All accessories connected to the “battery” powered outlets should be removed or turned of f when the vehicle is not in use to protect the battery against discharge. • T o ensure proper operation a MOP AR 威 knob and element must be used.
W ARNING! T o avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 V olt outlet. (Continued) W ARNING! (Continued) • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle.
CAUTION! (Continued) • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly .
The power inverter is designed with built-in overload protection. If the power rating of 150 W atts is exceeded, the power inverter will automatically shut down. Once the electrical device has been removed fr om the outlet the inverter should automatically reset.
Press the power inverter switch (located on the upper switch bank) to turn the power on to the outlet. Press the switch again to turn the power off. NOTE: When the power inverter switch is pressed, there will be a delay of appr oximately one second before the inverter status indicator turns ON.
CUPHOLDERS There ar e two cupholders for the front seat passengers located in the center console. The rear passengers have access to two cupholders that pull out from the lower center of the r ear seat.
the cargo light lens surface will turn of f all interior lights. Push on the lens surface a second time to restor e the interior lights to normal operation. Rear Storage Compartment The rear storage compartment is located on the driver’s side behind the second row seat.
W ARNING! In an accident, a loose cargo cover in the vehicle could cause injury . It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compartment. Remove the cover from the vehicle when taken from its mounting.
Cargo Tie-Down Hooks The cargo tie-downs, located on the car go area floor , should be used to safely secure loads when the vehicle is moving. W ARNING! • T o help protect against personal injury , passengers should not be seated in the rear cargo area.
W ARNING! (Continued) • Do not carry loads which exceed the load limits described on the label attached to the left door or left door center pillar . • Always place cargo evenly on the cargo floor . Put heavier objects as low and as far forward as possible.
The cargo load floor is held by spring loaded latches. In order to use the car go load floor , use the following procedur e: NOTE: The cargo load floor latches should not be used as cargo tie-downs. 1. Flip up the pull loop(s) so they are perpendicular (straight up) to the top surface of the tray .
Rotate the switch upward to the “On” position to activate the rear wiper . NOTE: The rear wiper operates in an intermittent mode only . Rotate the switch upward to the “washer” position to activate that rear washer . The washer pump will continue to operate as long as the lever or ring is engaged.
CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window . Do not use abrasive window cleaners on the interior surface of the window . Use a soft cloth and a mild washing solution, wiping parallel to the heating elements.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 1 5 4 䡵 Instrument Cluster .................... 1 5 5 䡵 Instrument Cluster Descriptions ........... 1 5 6 䡵 Electronic V ehicle Information Center (EVIC) .
▫ Operating Instructions — Uconnect™ phone — If Equipped ...................... 1 8 5 ▫ Clock Setting Procedur e — RBZ Radio ..... 1 8 5 ▫ Clock Setting Procedur e — RER/REN Radio ............................. 1 8 7 䡵 Media Center 130 (RES) — AM/FM Stereo Radio W ith CD Player (MP3 AUX Jack) .
䡵 Uconnect™ Multimedia (Satellite Radio) — If Equipped (REN/RER/RBZ/RES Radios Only) . . 215 ▫ System Activation .................... 2 1 5 ▫ Electronic Serial Number/Sirius Identification Number (ESN/SID) ......... 2 1 6 ▫ Selecting Uconnect™ Multimedia (Satellite) Mode .
INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 5 — Upper Switch Bank 9 — Lower Switch Bank 2 — Instrument Cluster 6 — Power Outlet/Cigar Lighter 10 — Climate Controls 3 — Radio 7 — Storage.
INSTRUMENT CLUSTER 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 155.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Speedometer Indicates vehicle speed. 2. Brake W arning Light This light monitors various brake functions, including brake fluid level and parking brake application.
W ARNING! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. Y ou could have an accident. Have the vehicle checked immediately . V ehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electr onic Brake Force Distribution (EBD).
5. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of an onboard diagnostic system called OBD II that monitors engine and automatic transmission con- trol systems. The light will illuminate when the key is in the ON position before engine start.
6. Airbag W arning Light This light turns on and remains on for six to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not on during starting, stays on, or turns on while driving, have the system inspected by an authorized dealer as soon as possible.
10. Oil Pressure W arning Light This light indicates low engine oil pressur e. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle, and shut off the engine as soon as possible. A continuous chime will sound when this light turns on.
reduces fuel ef ficiency and tire tr ead life, and may affect the vehicle’s handling and stopping ability . Please note that the TPMS is not a substitute for proper tire maintenance, and it is the d.
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call an authorized dealer- ship for service if your vehicle overheats. If you decide to look under the hood yourself, see “Main- taining Y our V ehicle”.
W ARNING! If a warning light remains on the system may not be working and you will not have the benefit of ESP or BAS. Under certain driving conditions, where ESP or BAS would be beneficial, you - if you have not adjusted your driving speeds and stopping in or to account for the lack of the feature, may be in acci- dent.
make a recor d of the odometer reading befor e the repair/ service, so that you can be sure that it is pr operly reset, or that the door jamb sticker is accurate if the odometer must be reset at zer o. 19. Shift Lever Indicator The Shift Lever Indicator is self-contained within the instrument cluster .
23. Charging System Light This light shows the status of the electrical charging system. The light should come on when the ignition switch is first turned ON and remain on briefly as a bulb check. If the light stays on or comes on while driving, turn off some of the vehicle’s non-essential electrical devices or increase engine speed (if at idle).
The EVIC consists of the following: • System Status • V ehicle Information W arning Message Displays • Personal Settings (Customer-Pr ogrammable Features) • Compass Display • Outside T emper.
COMP ASS/TEMPERA TURE Button Press and r elease the COMP ASS/ TEMPERA TURE button to display one of eight compass readings and the outside temperatur e.
• HOOD/DOORS OPEN (with graphic) • LIFTGA TE/HOOD OPEN (with graphic) • HOOD/GLASS/DOOR OPEN (with graphic) • HOOD/GLASS/DOORS OPEN (with graphic) • HOOD/GA TE/DOOR OPEN (with graphic) • H.
• MEMOR Y SYSTEM DISABLED — SEA TBEL T BUCK- LED (with graphic) • MEMOR Y SYSTEM DISABLED — VEHICLE NOT IN P ARK • DRIVER 1 MEMOR Y • DRIVER 2 MEMOR Y • ADJ.
• 1/4 Mile (if equipped with Performance Pages) • Instantaneous G-Force (if equipped with Performance Pages) • Peak G-Force (if equipped with Performance Pages) • RKE BA TTERY LOW • VEHICLE .
and average fuel economy , according to the current fuel tank level. DTE cannot be reset thr ough the FUNCTION SELECT button. NOTE: Significant changes in driving style or vehicle loading will greatly af fect the actual drivable distance of the vehicle, regar dless of the DTE displayed value.
• Display Units of Measure In T o make your selection, press and release the FUNC- TION SELECT button until “ENGLISH” or “METRIC” appears. T o Reset The Display Reset will only occur while a resettable function is being displayed. Press and r elease the FUNCTION SELECT button once to clear the resettable function being dis- played.
The Performance Pages include the following features: • 0-60 mph (0-100 km/h) • Braking Distance • 1/8 Mile • 1/4 Mile • Instantaneous G-Force • Peak G-Force T o access, press and release the MENU button until Performance Pages displays in the EVIC.
• T o clear the vehicle’s best 0-60 mph (0-100 km/h) time, press and hold the FUNCTION SELECT button for five seconds. Braking Distance When selected, this screen displays the vehicle’s braking distance and the speed at which the brake pedal was pressed.
1/8 Mile, 1/4 Mile When selected, this screen displays the time it takes the vehicle to travel 1/8 mile (1/4 mile) within 30 seconds and the vehicle’s speed when it reaches 1/8 mile (1/ 4 mile). • The feature will “r eady” when the vehicle is at 0 mph (0 km/h).
Compass Display The compass readings indicate the dir ection the vehicle is facing. Press and r elease the COMP ASS/TEMPERA TURE button to dis- play one of eight compass readings and the outside temperature.
5. Complete one or more 360–degree turns (in an ar ea free fr om large metal or metallic objects) until the “CAL” indicator turns off. The compass will now function normally . Compass V ariance Compass V ariance is the difference between magnetic North and Geographic North.
4. Press and release the FUNCTION SELECT button to change the variance number . Continue until desired number is reached. 5. Press either MENU, SCROLL, or COMP ASS/TEMP button to set the value and exit. Driver-Selectable Surround Sound (DSS) – If Equipped Press and r elease the MENU button until “Surround Sound” displays in the EVIC.
NOTE: The EVIC will not change the Uconnect™ lan- guage selection. Please refer to “Language Selection” in Uconnect™ Phone for details. Auto Door Locks When YES (Y) is selected, all of the doors will lock automatically when the vehicle reaches a speed of 15 mph (24 km/h).
Flash Lamps with Lock When YES (Y) is selected, the fr ont and rear turn signals will flash when the doors are locked or unlocked with the RKE transmitter . This feature may be selected with or without the “Sound Horn with Lock” feature. T o make your selection, press and r elease the FUNCTION SE- LECT button until YES (Y) or NO (N) appears.
Rain Sensing W ipers — If Equipped When YES (Y) is selected, the system will automatically activate the windshield wipers if it senses moisture on the windshield. T o make your selection, press and release the FUNCTION SELECT button until YES (Y) or NO (N) appears.
Key Off Power Delay When this feature is selected, the power window switches, radio, Uconnect™ Phone (if equipped), DVD video system (if equipped), power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned off.
• T ire Pressur e Monitor System (shows the current pr es- sure of all four r oad tires). For additional information, refer to “T ire Pr essure Monitor System” in “Starting And Operating”. NOTE: • T ires heat up during normal driving conditions.
The REN, RER and RBZ radios contain a CD/DVD player , USB port, and a 30-gigabyte hard drive (HDD). Sirius Satellite Radio is optional. The 6.5 in (16.5 cm) touch screen allows for easy menu selection. The RER radio also contains a Global Positioning System (GPS)-based Navigation system.
Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1. T urn on the radio. 2. T ouch the screen wher e the time is displayed. The clock setting menu will appear on the screen.
5. T ouch the screen wher e the word “Save” is displayed. Clock Setting Procedure — RER/REN Radio Uconnect 威 gps — RER Only The GPS receiver used in this system is synchr onized to the time data being transmitted by the GPS satellite. The satellite clock is Greenwich Mean T ime (GMT).
2. T ouch the screen wher e “User Clock” is displayed, the clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” T ouch the screen wher e the words “Daylight Savings” ar e dis- played to change the current setting.
MEDIA CENTER 130 (RES) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display .
SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory . The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corr esponding button number will display .
If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1.
the current selection. Pr essing and holding the SEEK button will allow faster scrolling thr ough the tracks in CD and MP3 modes. TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display .
Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor - mally .
Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
MEDIA CENTER 130 (RES/RSC) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob.
Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display .
Program T ype 16-Digit Character Display Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Persona.
SETUP Button Pressing the SETUP button allows you to select between the following items: • Set Clock — Pressing the SELECT button will allow you to set the clock. Adjust the hours by turning the TUNE/SCROLL control knob. After adjusting the hours, press the TUNE/SCROLL control knob to set the minutes.
Button s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC/AUX Button Pressing the DISC/AUX button will allow you to switch from AM/FM modes to DISC/AUX mode.
CAUTION! (Continued) • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player . Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player .
AM/FM Button Press the button to select either AM or FM mode. SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to pr ovide an interesting change of pace.
• Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead. W ith a maximum number of files, exceeding 20 folders will result in this display .
MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags.
LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob.
TIME Button (Auxiliary Mode) Press this button to change the display to time of day . The time of day will display for five seconds (when the ignition is OFF). Operating Instructions - Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details.
• Connecting an iPod 威 to the AUX port located in the radio faceplate, plays media, but does not use the UCI feature to contr ol the connected device. Connecting The iPod 姞 Use the provided connection cable to connect an iPod 威 to the vehicle’s 16–pin connector port (which is located in the glove compartment on some vehicles).
Once in the UCI (iPod 威 ) mode, iPod 威 audio tracks (if available from iPod 威 ) start playing over the vehicle’s audio system. Play Mode When switched to UCI mode, the iPod 威 automatically starts Play mode.
• While a track is playing, press the INFO button to see the associated metadata (artist, track title, album, etc.) for that track. Pressing the INFO button again jumps to the next screen of data for that track. Once you have seen all screens, the last INFO button pr ess will take you back to the play mode screen on the radio.
• During all List modes, the iPod 威 displays all lists in “wrap-around” mode. So if the track is at the bottom of the list, just turn the wheel backwards (counter-clockwise) to get to the track faster . • In List mode, the radio PRESET buttons are used as shortcuts to the following lists on the iPod 威 .
CAUTION! • Leaving the iPod 威 (or any supported device) any- where in the vehicle in extreme heat or cold can alter the operation or damage the device. Follow the device manufacturer ’ s guidelines. • Placing items on the iPod 威 , or connections to the iPod 威 in the vehicle, can cause damage to the device and/or to the connectors.
information, call the toll-free number 888-539-7474, or visit the Sirius web site at www .sirius.com, or at www- .siriuscanada.ca for Canadian residents. Electronic Serial Number/Sirius Identification Number (ESN/SID) Please have the following information available when calling: 1.
bikes should be placed as far rearwar d as possible, within the loading design of the rack. Do not place items directly on or above the antenna. Reception Quality Satellite reception may be interr upted due to one of the following reasons: • The vehicle is parked in an undergr ound parking structur e or under a physical obstacle.
INFO Button Pressing the INFO button will cycle the display informa- tion between Artist, Song T itle, and Composer (if avail- able). Also, pr essing and holding the INFO button for an additional three seconds will make the radio display the Song T itle all of the time (press and hold again to return to normal display).
SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number . This number is used to activate, deactivate, or change the Sirius subscription.
KICKER 姞 HIGH PERFORMANCE SOUND SYSTEM WITH DRIVER-SELECT ABLE SURROUND (DSS) – IF EQUIPPED Y our vehicle is equipped with a state of the art audio amplifier that provides 5.
Installing The Subwoofer 1. Lower the left rear passenger seat. 2. Align the left outside edge of the subwoofer with the outside edge of the inner cargo tie down hook.
3. Slide the subwoofer toward the front of the vehicle so that the rear edge lines up with the end of the load floor . 4. Connect the electrical connector . 5. Fold the left r ear passenger seat rearwar d into the upright position. The rear tether anchors should engage the hooks located on the back of the subwoofer .
REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system contr ols are located on the r ear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a r ocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system.
The button located in the center of the left-hand control will tune to the next preset station that you have pr o- grammed in the radio preset pushbutton.
NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair , moisture or dew on the disc) oversized, or have protection encoding. T ry a known good disc before considering disc player service.
NOTE: The numbers on the temperature dial r epresent a comfort setting when the Mode knob is set to AUTO, and not the actual air temperature. T urn the mode control (on the right) knob to AUTO, and then turn the blower control (on the left) knob to either LO AUTO or HI AUTO.
The system will automatically control r e- circulation. However , pressing this but- ton will temporarily put the system in “Recirculation” mode. This can be used when outside conditions such as smoke, odors, dust, or high humidity are pr esent. This will cause the LED to illuminate.
Manual Operation This system offers a full complement of manual override features which consist of Blower Pr eferred Automatic, Mode Preferr ed Automatic with Manual Air T emperature Control, and Manual. This means the customer can override the blower , mode, and disable the Automatic T emperature Control completely .
4 UNDERST ANDING YOUR INSTRUMENT P ANEL 229.
NOTE: Regardless of the type of operation, when a temperature knob is set to the full clockwise or full counterclockwise position, the system will deliver full hot or full cold air out of the ducts, respectively .
Bi-Level Air flows both through the outlets located in the instrument panel and those located on the floor . Air flows through the r egisters in the back of the center console, and under the front seats to the r ear seat passengers. These registers can be closed to block airflow .
captured interior air to condense on windows and ham- per visibility . For this reason, the system will not allow “Recirculation” mode to be selected while in the defr ost or defrost/floor modes. Attempting to use Recirculation while in these modes will cause the LED in the button to blink and then turn off.
additional engine cooling may be requir ed. If this situa- tion is encountered, operate the transmission in a lower gear to increase engine RPM, coolant flow and fan speed. When stopped in heavy traffic, it may be necessary to shift into NEUTRAL (N) and press the accelerator slightly for fast idle operation to increase coolant flow and fan speed.
Operating Tips Chart 234 UNDERST ANDING YOUR INSTRUMENT P ANEL.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 3 8 ▫ Normal Starting ..................... 2 3 8 ▫ Extreme Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) ............... 2 3 9 ▫ If Engine Fails T o Start ........
▫ Power Steering Fluid Check ............. 2 4 9 䡵 Parking Brake ........................ 2 5 0 䡵 Anti-Lock Brake System ................. 2 5 2 䡵 Electronic Brake Contr ol System ........... 2 5 5 ▫ Anti-Lock Brake System (ABS) ........... 2 5 5 ▫ T raction Control System (TCS) .
▫ Replacement T ires .................... 2 7 7 䡵 T ire Rotation Recommendations ........... 2 7 8 䡵 T ire Pressur e Monitor System (TPMS) ....... 2 7 9 ▫ Premium System .................... 2 7 9 ▫ General Information .................. 2 8 2 䡵 Fuel Requirements .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! • Never leave children alone in a vehicle.
Extreme Cold Weather (Below ⫺ 20°F or ⫺ 29°C) T o ensure reliable starting at these temperatur es, use of an externally powered electric engine block heater (avail- able from your authorized dealer) is r ecommended.
If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold W eather” proce- dures, it may be flooded. T o clear any excess fuel, push the accelerator pedal all the way to the floor and hold it. Then, turn the ignition switch to the ST AR T position and release it as soon as the starter engages.
W ARNING! It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something.
3. Using a flat blade screwdriver , carefully r emove the shift lock manual override cover which is located on the PRNDL bezel. 4. Press and maintain firm pressur e on the brake pedal. 5. Using the screwdriver , reach into the manual override opening.
W ARNING! It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something.
W ARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should apply the park brake, shift the transmission into P ARK, and remove the key fob from the ignition switch.
NOTE: The Electronic Stability Pr ogram (ESP) and T raction Control (if equipped) should be turned OFF before attempting to r ock the vehicle. Refer to “Electronic Brake Control System” in “Starting and Operating” for further information.
Operation By placing the shift lever in the DRIVE position, the shift lever can be moved from side to side. This allows the driver to engage the AutoStick 威 mode. Moving the shift lever to the right (+) or the left (-) will engage the AutoStick 威 mode.
When in the AutoStick 威 mode, as the engine RPM nears the engine maximum speed, an “UPSHIFT” message will appear in the Electronic V ehicle Information Center (EVIC) portion of your instrument cluster .
• The transmission will automatically shift up when maximum engine speed is reached while AutoStick 威 is engaged. • T ransmission shifting will be more noticeable when AutoStick 威 is engaged. POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces.
CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible.
W ARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to ensure accurate fluid level reading. Do not overfill. Use only manufacturers recommended power steering fluid. If necessary , add fluid to restore to the pr oper indicated level.
NOTE: • When the parking brake is applied vehicle speed is detected, the light will flash and a chime will sound to alert the driver . Fully release the parking brake befor e attempting to move the vehicle. • This light only shows that the parking brake is ap- plied.
W ARNING! (Continued) • Always fully apply the parking brake when leav- ing your vehicle, or it may roll and cause damage or injury . Also be certain to leave the transmission in P ARK. Failure to do so may allow the vehicle to roll and cause damage or injury .
The Anti-Lock Brake System pump motor runs during the self-test at 12 mph (20 km/h) and during an ABS stop. The pump motor makes a low humming noise during operation, which is normal. W ARNING! • Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to an accident.
NOTE: During severe braking conditions, a pulsing sensation may occur and a clicking noise will be heard. This is normal, indicating that the Anti-Lock Brake System is functioning. W ARNING! T o use your brakes and accelerator more safely , follow these tips: • Do not “ride” the brakes by resting your foot on the pedal.
ELECTRONIC BRAKE CONTROL SYSTEM Y our vehicle is equipped with an advanced electronic brake control system that includes Anti-Lock Brake Sys- tem (ABS), T raction Control System (TCS), Brake Assist System (BAS), Electronic Roll Mitigation (ERM), and Electronic Stability Pr ogram (ESP).
stability . A feature of the TCS system functions similar to a limited slip differ ential and controls the wheel spin across a driven axle. If one wheel on a driven axle is spinning faster than the other , the system will apply the brake of the spinning wheel.
Electronic Roll Mitigation (ERM) This system anticipates the potential for wheel lift by monitoring the driver ’s steering wheel input and the speed of the vehicle.
the brake of the appropriate wheel to assist in counter - acting the over/under steer condition. Engine power may also be reduced to help the vehicle maintain the desired path. ESP uses sensors in the vehicle to determine the vehicle path intended by the driver and compares it to the actual path of the vehicle.
The ESP system has two available operating modes. On This is the normal operating mode for ESP . Whenever the vehicle is started, the ESP system will be in this “On” mode. This mode should be used for most driving situations. ESP should only be turned to “Partial Of f” mode for specific reasons as noted below .
Off” mode by pr essing the “ESP OFF” switch. Once the situation requiring ESP to be switched to the “ESP Partial Off” mode is over come, turn ESP back on by momen- tarily pressing the “ESP OFF” switch. This may be done while the vehicle is in motion.
If the “ESP/BAS W arning Light” comes on continuously with the engine running, a mal- function has been detected in either the ESP or the BAS system, or both.
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards.
• T emporary spare tires ar e high-pressur e compact spares designed for temporary emer gency use only . T ires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- tion. Example: T145/80D18 103M. • High flotation tire sizing is based on U.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light truck tir e based on U.
EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can ca.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and r ear door (of a four-door vehicle) r unning from the sill to the r oof.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard te.
3) tire size designed for your vehicle 4) cold tire inflation pr essures for the fr ont, rear , and spare tir es. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]).
5 ST ARTING AND OPERA TING 271.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Run Flat Tires This vehicle is equipped with run flat tir es.
Safety W ARNING! • Improperly inflated tires are dangerous and can cause accidents. • Under inflation increases tire flexing and can result in over-heating and tire failure. • Over inflation reduces a tire’s ability to cushion shock. Objects on the road and chuck holes can cause damage that results in tire failure.
Tire Inflation Pressures The proper cold tir e inflation pressur e is listed on the driver’s side “B” Pillar . The pressur e should be checked and adjusted as well as inspecting for signs of tire wear or visible damage at least once a month. Use a good quality pocket-type gauge to check tire pr essure.
T ire pressur e may increase fr om 2 to 6 psi (13 to 40 kPa) during operation. DO NOT reduce this normal pr essure build up or your tire pr essure will be too low . Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits.
Cuts and punctures in radial tir es are r epairable only in the tread ar ea because of sidewall flexing. Consult your dealer for radial tire r epairs. Tire Spinning When stuck in mud, sand, snow , or ice conditions, do not spin your vehicle’s wheels above 30 mph (48 km/h).
These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tir e should be replaced.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
TIRE PRESSURE MONITOR SYSTEM (TPMS) Premium System The T ire Pressur e Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pr essure readings to the Receiver Module.
NOTE: Y our system can be set to display pressure units in PSI, kPa, or BAR. Should a low tire condition occur on any of the four active road tir e(s), you should stop as soon as possible, and inflate the low tire(s) that is flashing on the graphic display to the vehicle’s recommended cold tir e pressur e.
If the ignition switch is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the “T ire Pressur e Monitoring T elltale Light” will no longer flash, the ⬙ CHECK TPM SYSTEM ⬙ text message will not be present, and a pr essure value will be displayed instead of dashes.
General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed operation.
Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the W orld- wide Fuel Charter , WWFC) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle.
E85 Usage In Non-Flex Fuel V ehicles Non-FFV vehicles are compatible with gasoline contain- ing 10% ethanol (E10). Gasoline with higher ethanol content may void the vehicle’s warranty .
can be used at levels higher than those allowed in the United States. MMT is prohibited in Federal and Califor - nia reformulated gasoline. Materials Added to Fuel All gasoline sold in the United States is requir ed to contain effective deter gent additives.
NOTE: Intentional tampering with the emissions con- trol system can r esult in civil penalties being assessed against you. Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: (Continued) W ARNING! (Continued) • Do not inhale exhaust gases.
ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door , on the driver’s side of the vehicle. If the gas cap is lost or damaged, be sure the r eplacement cap is for use with this vehicle. CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap).
W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regula- tions and will cause the MIL to turn on.
TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer car efully re- view this information to tow your load as efficiently and safely as possible.
Gross Combination W eight Rating (GCWR) The GCWR is the total permissible weight of your vehicle and trailer when weighed in combination. NOTE: The GCWR rating includes a 150 lbs (68 kg) allowance for the presence of a driver . Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and r ear axles.
W eight-Distributing Hitch A weight-distributing system works by applying lever- age through spring (load) bars. They ar e typically used for heavier loads, to distribute trailer tongue weight to the tow vehicle’s front axle and the trailer axle(s).
T railer Hitch Classification The following chart provides the industry standar d for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition.
T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ T ransmission GCWR (Gross Combined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.
Never exceed the maximum tongue weight stamped on your trailer hitch. Consider the following items when computing the weight on the front/r ear axles of the vehicle: • The trailer tongue weight of the trailer . • The weight of any other type of cargo or equipment put in or on your vehicle.
T owing Requirements T o promote proper br eak-in of your new vehicle drive- train components the following guidelines are r ecom- mended: CAUTION! • Do not tow a trailer at all during the first 500 miles (805 km) the new vehicle is driven. The engine, axle or other parts could be damaged.
W ARNING! (Continued) • Safety chains must always be used between your vehicle and trailer . Always connect the chains to the hook retainers of the vehicle hitch. Cross the chains under the trailer tongue and allow enough slack for turning corners. • V ehicles with trailers should not be parked on a grade.
− Check for signs of tire wear or visible tir e damage before towing a trailer . Refer to “T ires – General Information” in “Starting and Operating” for proper inspection procedur e. − When replacing tir es, refer to “T ires – General Infor - mation” in “Starting and Operating” for proper tir e replacement pr ocedures.
W ARNING! • Do not connect trailer brakes to your vehicle’s hydraulic brake lines. It can overload your brake system and cause it to fail. Y ou might not have brakes when you need them and could have an accident. • T owing any trailer will increase your stopping distance.
− When using the speed control, if you experience speed drops gr eater than 10 mph (16 km/h), disengage until you can get back to cruising speed. − Use speed control in flat terrain and with light loads to maximize fuel efficiency .
.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flashers ................ 3 0 2 䡵 If Y our Engine Overheats ................ 3 0 2 䡵 Jacking And T ire Changing ............... 3 0 4 ▫ Run Flat T ires ....................... 3 0 4 䡵 Jump-Starting Procedur es .
HAZARD W ARNING FLASHERS The Hazard W arning flasher switch is located on the switch bank just above the climate controls. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer gency .
CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads HOT (H), pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range.
JACKING AND TIRE CHANGING Run Flat Tires This vehicle is equipped with run flat tir es. Although the tires ar e designed with a “run flat” featur e that allows the vehicle to be driven approximately 50 miles (80 km) at 55 mph (88 km/h). immediate service should be ob- tained.
W ARNING! When temperatures are below the freezing point, electrolyte in a discharged battery may freeze. Do not attempt jump-starting because the battery could rup- ture or explode and cause personal injury . Battery temperature must be brought above freezing point before attempting a jump-start.
W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact.
CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1. Connect the positive (+) end of the jumper cable to the positive (+) post of the discharged vehicle.
8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery . 9. Disconnect the positive (+) end of the jumper cable from the positive (+) post of the dischar ged vehicle. 10. Reinstall the air intake duct.
W ARNING! Stand clear of vehicles when pulling with tow hooks. T ow straps and chains may break, causing serious injury . TOWING A DISABLED VEHICLE The manufacturer r equires towing your vehicle with all four wheels OFF the ground using a flatbed.
.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment – 6.1L .............. 3 1 3 䡵 Onboard Diagnostic System – OBD II ....... 3 1 4 ▫ Loose Fuel Filler Cap Message ........... 3 1 4 䡵 Emissions Inspection And Maintenance Programs ......
▫ Brake System ....................... 3 3 4 ▫ Automatic T ransmission ............... 3 3 5 ▫ Appearance Care And Protection From Corrosion .......................... 3 3 6 䡵 Fuses .............................. 3 4 1 ▫ Interior Fuses .....
ENGINE COMP ARTMENT – 6.1L 1 — Engine Coolant Reservoir 7 — Engine Oil Dipstick 2 — Power Distribution Center 8 — Power Steering Fluid Reservoir 3 — Brake Fluid Reservoir 9 — Engine Oil .
ONBOARD DIAGNOSTIC SYSTEM – OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
gas cap until a ⬙ clicking ⬙ sound is heard. This is an indication that the gas cap is properly tightened. The message will remain displayed until the vehicle diagnostic system can retest the fuel system.
Y our vehicle has a simple ignition key-actuated test, which you can use prior to going to the test station. T o check if your vehicle’s OBD II system is ready , you must do the following: 1. T urn the ignition switch to the ON position, but do not crank or start the engine.
before going to the I/M station. The I/M station can fail your vehicle because the MIL is on with the engine running. REPLACEMENT P ARTS Use of genuine MOP AR 威 parts for normal/scheduled maintenance and repairs is highly r ecommended to en- sure the designed performance.
Besides those maintenance items specified in the fixed maintenance schedule, there ar e other components which may requir e servicing or replacement in the futur e.
check the engine oil level is about five minutes after a fully warmed engine is shut off or befor e starting the engine after it has sat overnight. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level r eadings.
requir ements of Chrysler Material Standard MS-10725 and are appr oved to MB 229.3 or MB 229.5 (will be listed on the back label of the oil container). The manufacturer r ecommends the use of a full synthetic 5W -40 or equivalent engine oil. CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine.
Disposing of Used Engine Oil and Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can pr esent a problem to the environment.
Maintenance-Free Battery Y our vehicle is equipped with a maintenance-free battery . Y ou will never have to add water , nor is periodic main- tenance requir ed. CAUTION! It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post.
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. The external lock cylinders should be lubricated twice a year , preferably in the Fall and Spring.
The fluid reservoir for the windshield washers and the rear window washer is shar ed. The fluid reservoir is located in the engine compartment, be sure to check the fluid level at regular intervals. Fill the r eservoir with windshield washer solvent only (not radiator antifreeze).
inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as requir ed. W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you.
NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system.
Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position.
Cooling System — Drain, Flush and Refill If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner . Follow with a thorough rinsing to remove all deposits and chemicals.
CAUTION! (Continued) • This vehicle has not been designed for use with Propylene Glycol based engine coolant (anti- freeze). Use of Propylene Glycol based engine coolant (antifreeze) is not recommended. Adding Coolant Y our vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals.
NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifr eeze) and will requir e more fr equent engine coolant (antifreeze) changes.
Disposal of Used Engine Coolant Used ethylene glycol based engine coolant (antifreeze) is a regulated substance r equiring proper disposal. Check with your local authorities to determine the disposal rules for your community .
If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant recovery bottle. • Check engine coolant (antifreeze) fr eeze point in the radiator and in the coolant recovery bottle.
Brake System Fluid Level Check — Brake Master Cylinder The fluid level in the master cylinder should be checked whenever the vehicle is serviced, or immediately if the brake system warning light is on. If necessary , add fluid to bring level to the full mark on the side of the reservoir of the brake master cylinder .
W ARNING! (Continued) • T o avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container . Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point.
CAUTION! The fluid level is preset at the factory and does not require adjustment under normal operating condi- tions. If a transmission fluid leak occurs, visit your authorized dealer immediately . Severe damage to the transmission may occur . Y our authorized dealer has the proper tools to accurately adjust the fluid level.
W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using MOP AR 威 Car W ash or a mild car wash soap, and rinse the panels completely with clear water . • If insects, tar , or other similar deposits have accumu- lated on your vehicle, use MOP AR 威 Super Kleen Bug and T ar Remover or equivalent to remove.
• If you detect any stone chips or scratches in the paint, touch them up immediately . The cost of such repairs is considered the r esponsibility of the owner . • If your vehicle is damaged due to an accident or similar cause which destroys the paint and pr otective coating have your vehicle repair ed as soon as possible.
• For tough stains, apply MOP AR 威 T otal Clean or a mild soap solution to a clean, damp cloth and remove the stain. Use a fresh, damp towel to r emove soap residue. • For grease stains, apply MOP AR 威 Multi-Purpose Cleaner or equivalent to a clean, damp cloth and remove the stain.
W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Glass Surfaces All glass surfaces should be cleaned on a regular basis with MOP AR 威 Glass Cleaner or any commercial household-type glass cleaner .
FUSES Interior Fuses The fuse panel is on the lower instrument panel just to the left of the steering column. Cavity Cartridge Fuse Mini- Fuse Description 1 30 Amp Green Audio Amp (B+) 2 15 Amp Blue S.
Cavity Cartridge Fuse Mini- Fuse Description 10 10 Amp Red Final Drive Control Module (FDCM), Heater V entilation/ Air Conditioning (HV AC), Rear Heated Seat Switch, O/H, Heater V entilation/ Air Cond.
Cavity Cartridge Fuse Mini- Fuse Description 21 Spare (Acc De- lay) 22 15 Amp Blue Rear W iper (B+) 24 10 Amp Red Power Distribution Center (PDC) Relays, Powertrain Control Module, A580 (R/S) 25 10 Amp Red Shifter Assy (BTSI), T rans.
Cavity Cartridge Fuse Mini- Fuse Description 2 40 Amp Green HID Headlamps 3 50 Amp Red PTC Heater 2 (Diesel Only) 4 30 Amp Pink Power Outlets 5 50 Amp Red PTC Heater 3 (Diesel Only) 6 30 Amp Pink Cig .
Cavity Cartridge Fuse Mini- Fuse Description 18 40 Amp Green Accessory Delay , Seats 19 40 Amp Green JB Power 20 30 Amp Pink W iper Motor 21 20 Amp Y ellow Fuel Pump 22 20 Amp Y ellow TCM, A/C Clutch .
Cavity Cartridge Fuse Mini- Fuse Description 34 — Spare 35 20 Amp Y ellow T rail-T ow Mod (Ex- port Only) 36 — Spare 37 20 Amp Y ellow Ignition Switch 38 20 Amp Y ellow HID Left 39 20 Amp Y ellow .
Cavity Cartridge Fuse Mini- Fuse Description 8 10 Amp Red Lt Park Lamps 9 10 Amp Red T railer-T ow Park Lamps 10 10 Amp Red Rt Park Lamps 12 20 Amp Y ellow Front Contr ol Module (FCM) Batt #4 13 20 Am.
Cavity Cartridge Fuse Mini- Fuse Description 27 15 Amp Blue Ignition Off Draw (IOD) #1 — Intrusion Module, Satellite V ideo, Steering Con- trol Module 28 20 Amp Y ellow Ignition Off Draw (IOD) #2 .
REPLACEMENT BULBS Interior Lights Bulb T ype Glove Box Lamp ......................... 1 9 4 Grab Handle Lamp ................ L002825W5W Overhead Console Reading Lamps ......... VT4976 Rear Cargo Lamp ....................... 214–2 V isor V anity Lamp .
W ARNING! A transient high tension occurs at the bulb sockets of High Intensity Discharge (HID) headlamps when the headlamp switch is turned ON. It may cause serious electrical shock or electrocution if not serviced prop- erly . See your authorized dealer for service.
CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Front T urn Signal 1. Open the hood. 2. T urn the turn signal bulb one–quarter turn counter- clockwise to remove fr om housing.
CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Front Fog Lamp 1. Reach behind the front fascia from under the vehicle.
3. Squeeze the socket assembly tabs to remove it from the housing. 4. Pull the bulb to remove it from the socket. 5. Replace the bulb, reinstall the socket, and reattach the lamp assembly .
Center High-Mounted Stop Lamp (CHMSL) 1. Remove the two screws securing the CHMSL. 2. T wist the bulb socket to remove fr om the CHMSL housing. 3. Pull the bulb out of the socket.
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 21 Gallons 79 Liters Engine Oil with Filter 6.1 Liter Engine (SAE 5W -40, API Certified) 7 Quarts 6.6 Liters Cooling System * 6.1 Liter Engine (MOP AR 威 Engine Coolant/Antifreeze 5 Y ear/100,000 Mile Formula or equivalent) 14.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hy- brid Organic Additive T echnology) or equivalent.
Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. T ransfer Case MOP AR 威 NV146 T ransfer Case Fluid or equivalent. Usage of other fluid/ lubricants is NOT recommended.
.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 3 6 0 䡵 Maintenance Schedules ................. 3 6 0 ▫ Required Maintenance Intervals .
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions contr ol system.
• Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10,000 km) or 6 months, whichever comes first. Y our authorized dealer will reset the oil change indicator message after completing the scheduled oil change.
At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle. Required Maintenance Intervals Refer to the Maintenance Schedules on the following pages for the requir ed maintenance intervals.
6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Replace the engine air cleaner filter . ❏ Drain the transfer case and refill. ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes.
48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Replace the engine air cleaner filter . ❏ Inspect the brake linings; replace if necessary . ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes.
72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Replace the engine air cleaner filter . ❏ Inspect the brake linings; replace if necessary . ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes.
132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
† This maintenance is recommended by the manufactur er to the owner , but is not requir ed to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 3 7 9 ▫ Prepar e For The Appointment ........... 3 7 9 ▫ Prepar e A List ...................... 3 7 9 ▫ Be Reasonable W ith Requests .
䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 3 8 5 ▫ T readwear ......................... 3 8 5 ▫ T raction Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center .
W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and r emedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer .
These comprehensive Service Manuals pr ovide the information that students and professional technicians need in diagnosing/troubleshooting, pr oblem solving, maintaining, servicing, and repairing Chrysler Gr oup LLC vehicles.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufactur er in each category is shown on the sidewall of the tires on your vehicle.
T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s r esistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10.
ABS (Anti-Lock Brake System) ............ 159,252 Adding Engine Coolant (Antifreeze) .......... 3 3 0 Adding Fuel ........................... 2 8 7 Additives, Fuel ......................... 2 8 5 Adjustable Pedals ........................ 1 1 4 Air Conditioner Maintenance .
Keyless T ransmitter Replacement (RKE) ....... 2 2 Saving Feature (Pr otection) ............... 1 0 4 Belts, Seat ............................ 36,72 Body Mechanism Lubrication ............... 3 2 3 B-Pillar Location ........................ 2 6 8 Brake Assist System .
Check Engine Light (Malfunction Indicator Light) ............... 3 1 5 Checking Y our V ehicle For Safety ............. 7 1 Checks, Safety ........................... 7 1 Child Restraint .................... 60,61,66,68 Child Restraint T ether Anchors .
Dealer Service .......................... 3 1 7 Defroster , Rear W indow ................... 1 4 9 Defroster , W indshield ................... 73,230 Diagnostic System, Onboard ................ 3 1 4 Dimmer Switch, Headlight ................. 1 0 6 Dipsticks Power Steering .
Checking Oil Level ..................... 3 1 8 Compartment ......................... 3 1 3 Compartment Identification ............... 3 1 3 Coolant (Antifreeze) .................... 3 2 8 Cooling ............................. 3 2 8 Exhaust Gas Caution .
Fluid Leaks ............................. 7 3 Fluid Level Checks Brake .............................. 3 3 4 Cooling System ....................... 3 2 8 Engine Oil ........................... 3 1 8 Power Steering ........................ 2 4 9 Fluids, Lubricants and Genuine Parts .
Gear Ranges ........................... 2 4 3 General Information .................. 17,23,282 Glass Cleaning .......................... 3 4 0 Gross Axle W eight Rating .................. 2 9 0 Gross V ehicle W eight Rating ................ 2 8 9 Hands-Free Phone (Uconnect™) .
Interior Fuses .......................... 3 4 1 Interior Lighting ........................ 1 0 7 Interior Lights .......................... 1 0 7 Intermittent W ipers (Delay W ipers) ........... 1 1 0 Introduction ............................. 4 Inverter , Power .
Bulb Replacement ...................... 3 4 9 C a r g o .............................. 1 4 3 Center Mounted Stop ................... 3 5 4 Cruise .............................. 1 6 4 Daytime Running ...................... 1 0 3 Dimmer Switch, Headlight .
V anity Mirror .......................... 8 3 V oltage ............................. 1 6 6 Load Floor , Cargo ....................... 1 4 7 Loading V ehicle T i r e s ............................... 2 6 8 Locks ................................. 2 6 Automatic Door .
Multi-Function Control Lever ............... 1 0 0 New V ehicle Break-In Period ................ 7 0 Occupant Restraints ................... 34,51,55 Occupant Restraints (Sedan) ............. 48,51,54 Octane Rating, Gasoline (Fuel) .............. 2 8 2 Odometer .
Phone, Cellular .......................... 8 3 Phone, Hands-Free (Uconnect™) .............. 8 3 Placard, T ire and Loading Information ......... 2 6 8 Polishing and W axing ..................... 3 3 7 Power Distribution Center (Fuses) ..............
Refrigerant ............................ 3 2 3 Reminder , Lights On ..................... 1 0 4 Reminder , Seat Belt ....................... 4 3 Remote Control Starting System ........................ 2 4 Remote Keyless Entry (RKE) ................. 1 9 Remote Sound System (Radio) Controls .
Maintenance ......................... 3 4 0 Pretensioners .......................... 4 3 Reminder ............................ 1 6 4 Shoulder Belt Anchorage ................. 4 1 Seats ................................. 8 3 Adjustment .................
Speedometer ........................... 1 5 6 Starting ............................. 24,238 Automatic T ransmission ................. 2 3 8 Cold W eather ......................... 2 3 9 Engine Fails to Start .................... 2 3 9 Remote .........
T i r e s ............................ 73,272,385 Air Pressur e .......................... 2 7 4 General Information .................... 2 7 2 High Speed .......................... 2 7 5 Inflation Pressur es ..................... 2 7 4 Life of T ires .
Shifting ............................. 2 4 0 T ransmitter Battery Service (Remote Keyless Entry) .................... 2 2 T ransmitter , Garage Door Opener (HomeLink 威 ) ........................... 1 2 8 T ransmitter Programming (Remote Keyless Entry) .
W indow Fogging ........................ 2 3 2 W indows .............................. 2 9 Power ............................... 2 9 W indshield Defroster ................... 73,230 W indshield W ashers ...................... 1 0 9 Fluid .............
Chrysler Group LL C 10 WK742 -126-AB 2nd Edition Printed in U.S.A..
Ein wichtiger Punkt beim Kauf des Geräts Chrysler CHEROKEE SRT8OWNE (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Chrysler CHEROKEE SRT8OWNE noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Chrysler CHEROKEE SRT8OWNE - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Chrysler CHEROKEE SRT8OWNE reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Chrysler CHEROKEE SRT8OWNE erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Chrysler CHEROKEE SRT8OWNE besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Chrysler CHEROKEE SRT8OWNE verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Chrysler CHEROKEE SRT8OWNE. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Chrysler CHEROKEE SRT8OWNE gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
