Benutzeranleitung / Produktwartung 6000 SI des Produzenten Centro
Zur Seite of 32
HEA VY ARTICLE NEEDS 2 TO LIFT 5 YEAR LIMITED WARRANTY 85-1620-6 PROP ANE (G61501) W ARNING Failure to follow all of the manufactur er’ s instructions could r esult in hazardous fires, explosions, pr operty damage, or serious personal injury or even death.
i i T ABLE OF CONTENT S W arrant y . . . . . . . . . . . . . . . . . ii Ins ta ll at i on I nforma tio n . . . . . . 1 A dd iti ona l Warn i ng s . . . . . . . . 1 Us e of LP Ga s Cyli nde r , . . . . . 1- 2 T ran s portat i on and Storage of the LP Cyli nde r , Filli ng the LP Cyli nde r Pr i or to Usi ng the Gril l .
1 ADDITIONAL W ARNINGS INST ALLA TION INFORMA TION The installation of this appliance must be in accordance with all local codes, or in the absence of local codes: • Canadian installation must conform to the current national standar ds, which at this time are CAN / CGA-B149.
2 FILLING THE LP CYLINDER The cylinder must be filled prior to use and must have the air purged. For safety , follow these instructions when having your cylinder filled: • Have only your local qualified LP gas dealer fill or repair a cylinder . • Do not overfill the cylinder beyond the safe 80% fill level.
3 PRIOR TO USING Drawing E Do not use your barbecue until you have carefully rea d and fully understand all the inform ation in this manual. Please ens ure the followi ng: • Y our barbecue is pr operly assembled. • Ther e are no leaks in the system (see “Leak T est”).
4 SAFETY HOSE AND REGULA TOR Propane Gas Models: Y our barbecue is designed to operate on L.P . (Pr opane) gas at a pressur e of 2.74 Kpa (11˝ water column).
SAFETY LEAK TESTING 5 Drawing B Drawing C Drawing D Perform a “Leak T est” • Befor e lighting your barbecue for the first time. • Every time the cylinder is refilled, or any component is replaced. • At least once every year , pr eferably at the start of the season.
6 LIGHTING THE GRILL Make Sur e you have followed all the safety checks, procedur es and instructions indicated in the previous section, before attempting to light the grill.
7 6. Confirm that the burner is properly lit. If the flame pattern is other than normal, consult the T roubleshooting Guide for corrective action. 7. Always preheat the Barbecue before starting to cook. Light all bur ners and adjust them to the HIGH position for 5-10 minutes.
8 Lighting the Side Bur ner Use the Electronic Igniter on the main contr ol panel and the Side Burner control knob, on the far left panel, to light the side burner . • Push in and turn the side burner contr ol knob to the HIGH position. • Push the igniter button.
9 SEAR ZONE OPERA TING INSTRUCTIONS 1. Follow all safety check and lighting procedures for lighting main bur ners. 2. T urn the infrared burner knob to HIGH position. 3. Push the igniter button until a clicking sound is hear d to light the infrared burner .
1 0 • T ur n all knobs to “OFF” • Open lid during lighting. T urn gas on at LP tank. • Push in and turn the Rotisserie Burner Knob to the “ON” position. • Push the Igniter . Be sure burner lights and stays lit. • No temperature adjustment.
1 1.
1 2 P ARTS LISTING FOR CENTRO 6000 SI BBQ AND MUL TI-PURPOSE SIDE BURNER 85-1620-6 PROP ANE (G61501) Item No. Quantity Specification Part No. A 1 T op Lid Assembly AA 1 T op Lid Weldment G615-0100-01 .
1 3 BM BK BJ BI BH BQ BC BR CF CD CE CC CB CS CG CQ CN CM CO CP CR CL CK CJ CI BD BQ BP AD AB AA AC AD CH CA BB BA BE BF BG BN BO BL ENTERT AINMENT ISLAND CENTRO 6000SI BARBECUE 85-1620-6 PROP ANE (G6.
1 4 DA DB DC DD DE DG DH BS BQ DI DJ DK DF BQ CK DL DM ENTERT AINMENT ISLAND MUL TI PURPOSE SIDE BURNER 85-1620-6 PROP ANE (G61501) Manual Hardwar e Pack.
1 5 Hardwar e Pack List No. Description Quantity 1 1/4-20UNC x 13 Screw 6 2 ø7 Lock Washer 6 3 ø7 W asher 6 4 1/4-20UNC x 35 Wing Screw 4 5 AA Battery 1 ASSEMBL Y INSTRUCTIONS Before assembling the barbecue, read these instructions carefully . Assemble the barbecue on a flat, clean surface.
1 6 P ARTS LISTING FOR ENTERT AINMENT ISLAND AND GRANITE COUNTER TOP 85-1620-6 (PROP ANE) (G61501) Item No. Quantity Specification Part No. EA 1 T op Rear Granite Support Brace G615-0061-01 EB 1 Rear .
1 7 EA EC EF EE EJ ET ES ER EP EO EN EQ EU EK EK EF EG EH EL EM EK EJ EI ED EE EB EV ENTERT AINMENT ISLAND WITH GRANITE COUNTER TOP 85-1620-6 (PROP ANE) (G61501) Hardwar e Pack.
1 8 Hardwar e Pack List No. Description Quantity A 5/16-18UNC x 38 Screw 2 B 5/16-18UNC x 20 Screw 10 C 5/16-18UNC Nut 26 D ø8 W asher 38 E ø8 Lock Washer 38 F 1/4-20UNC x 15 Screw 13 G ø6 W asher 13 H ø6 Lock Washer 13 I No.
1 9 EK EL EK EG EL EK Note: Hardware for Steps #1-21 ar e pr ovided in the Entertainment Island with Granite Countertop hardwar e pack. 1 Assemble the Bottom Support feet (EK) (x4) and Nut (x4) to the Bottom Panel (EL) as shown. Tighten all bolts. T urn Bottom Panel over .
2 0 5 Align and connect the Front Island W all (EM) to the Left and Right Island Walls (ET + EI) using Hardwar e B, C, D, E as shown. ET ED ED EI ET EM EI 4 Align and connect the Left (ET) and Right (EI) Island Walls to the T op Support Bar (Ed) using Har dware C, D, and E as shown.
2 1 B EF EF EB EL 7 Assemble the Bottom Panel (EL) by using Hardwar e F , G, and H. EI EB EL ET EM 8 Once the Bottom Panel (EL) has been attached to the Front and Rear Island Walls (EM + EB), you can now attach the Bottom Panel (EL) to the Left and Right Island W all (ET + EI) using Har dware C, D, and E.
2 2 EF EB EF EM 10 C on n e ct t h e B B Q a nd S i de B u r n er s u pp o r t b ar s ( EF ) t o th e re a r island wall (EB) using har dware D, E and B. 11 Connect the fr ont BBQ and side burner support bars (EF) to the front Island wall (EM) using hardwar e D, E and C.
2 3 EA EA EB EB ES EM ES EA 13 Insert and Attach the T op rear granite support brace (EA) to the Rear Island W all (EB) using har dware C, D and E. 14 Insert and attach the T op Front Granite Support brace (ES) to the Front Island Wall (EM), together with the Support Bracket, as shown using hardware F , G and H.
2 4 EE EJ EM EQ EP 16 Mount the Left granite Side Shelf (EE) to the Left Island Wall (ET) using the Shelf Support Bracket (EJ) and hardware C, D, E, F , G and H, as shown. 17 Attach the T rash Basket (EQ) to the Left Door (EP) using hardware D, E and C.
2 5 EN EM EM EP 19 Assemble the right door (EN) to the Front Island W all (EM) by slid- ing the door into the hinges fr om the top as shown. No hardware is needed in this step. 20 Assemble the Left Door (EP) to the lower hinges by sliding the door into the hinges from left to right, as shown.
2 6 Hardware for Steps 22-24 ar e pr ovided in Centro 6000 SI BBQ and Multi-purpose Side Burner har dware pack. 22 Assemble the 2 tracks of Pull-out T ank T ray (DK) to the bottom panel (located inside the right door) by using 1/4”-20UNC x 13 screw (x6), 7mm flat washer (x6), and 7mm lock washer (x6), as shown.
2 7 25 Connect the female and male ends of the QDD device found under the main grill head and Side Burner . Follow by connecting the Hose and Regulator to the Pr opane tank. Make sure the hose and regulator will pass through the front gap between the front panels and grill body .
2 8 26 Open lid and position the 3 Flame T amers (BL) above the 3 Main Burners (BI&BJ). Place the 2 cooking grate (BN) into the burner box to the left as shown.
2 9 2 9 29 Place the Side Bur ner Grate (DD) or Griddle (DC) onto the Side Burner for different cooking purpose. Fig. 29.
T rileaf Distribution T rifeuil T oronto, Canada M4S 2B8 DISTRIBUTOR.
Ein wichtiger Punkt beim Kauf des Geräts Centro 6000 SI (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Centro 6000 SI noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Centro 6000 SI - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Centro 6000 SI reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Centro 6000 SI erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Centro 6000 SI besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Centro 6000 SI verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Centro 6000 SI. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Centro 6000 SI gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
