Benutzeranleitung / Produktwartung EC-37OO des Produzenten Cateye
Zur Seite of 32
EC-37OO RECUMBENT TYPE Ca t e y e e rg oc i se r OPERA TING INSTRUCTIONS R RECUMBENT TYPE.
1 How to Use This Manual After you read the Starting up section of this manual, assemble your Cateye Ergociser™ and try it out . When you get used to the machine and de- velop a greater interest in it, please read the Opera- tion section in preparation to trying the machine's numerous functions.
EC-3700 HEART RATE TIME WORK RATE CADENCE PEDAL TORQUE PROGRAM NAME 1. Attach the pulse sensor. 2. Press until desired program name flashes. 3. Press to enter the program. 4. Press to adjust blinking digits. 5. Press to let other digits blink. Repeat 4 & 5.
R EC-3700 Main Unit Control Unit Pulse Sensor Jack Card Inlet (Data Card is inserted here.) Cable Hooks (Holds pulse sensor cable.) Joint Fitting (Connects main unit with rear frame.) Seat Lock Pin (Pull when adjusting seat position.) Handlebar Seat Sensor Clip (Attach pulse sensor when not in use.
INTRODUCTION Thank you very much for your purchase of the Model EC-3700 Cateye Ergociser™. The model EC-3700 is a new recumbent type high-tech exerciser with a built-in computerized training system designed specifically to promote cardiovas- cular fitness and overall endurance, the keystone of good health.
1 Let's assemble 2 Installing the control unit 3 How to adjust each part 4 Handling the pulse (earlobe) Sensor 5 Y our first ride 6 The six programs of operation 7 Using your Ergociser without a data card Make sure all components are included in a package.
6 3 Mounting Seat and Handlebar • Mount the seat to the seat pipe us- ing the large screws and the handlebar using the small ones. Let's assemble hexagon wrench front leg (with casters) nuts 1 .
8 Note: The batteries are used for storing and updating the date memory even while the main unit is turned off. The batter- ies will last about 2 years un- der normal use. When the bat- tery symbol lights up on the LCD screen, replace the batteries promptly.
10 1 3 7 8 6 4 2 5 How to Adjust each part 1 Level Adjustment • Turn the level adjuster on the rear leg so that the unit is placed stably. • When the indication line on the level adjuster is at the top, the rear leg is at the same level as the caster of the front leg.
12 R EC-3 7 0 0 Handling the pulse(earlobe) sensor cable hook sensor clip cable holder sensor clip pulse (earlobe) sensor cable clip This model detects and displays your pulse rate during exercise by the pulse sensor from your earlobe. Being a sensitive electronic part, the pulse sensor must be handled with sufficient care.
14 TIME AUTO R E S E T M O D E A D V 1 Age is shown by the figure “50” 2 “150” is the upper-limit pulse rate set by the machine (200 - age). If this pulse rate is ex- ceeded during training, an alarm will sound and the pedal resis- tance will drop to minimum (0.
16 PULSE RA TE The six programs of operation 2 Automatic training (training at a constant pulse rate) • You set the pulse rate at which you want to exercise and the Model EC-3700 automatically ad- justs pedal resistance to maintain that pulse rate. This is an ideal ba- sic form of aerobic training.
18 AUTO :Automatic training CONST :Isopower training INTVL :Interval training HILL :Hill profile training MANUAL :Manual training TEST 1 Switch on power supply • Plug in the AC adaptor and turn on the switch at the right side of the main unit. • In the screen "AUTO" appears blinking.
1 Y our strength level and training index 2 Aerobic power measurement (Physical fitness test) 3 Automatic training 4 Isopower (constant load) training 5 Interval training 6 Hill profile training 7 Man.
20 Y our strength level and training index (1) Purpose of Exercise • Have you ever been out of breath after climbing a flight of stairs or after a brisk walk? When we are walking, running and even sleeping, our body is taking in oxygen and generating energy.
22 Physical Fitness Level and T raining Index The "Aerobic power measurement" program evaluates your physical fitness level according to 5 levels and, it also evaluates your maximum oxygen up- take with an estimated value.
24 TIME PLL WT AGE lb TEST TIME kg·m TM min:sec watt kg·m rpm TEST TIME kg · m TM min:sec watt kg · m rpm TEST Aerobic power measurement (1) • Input your age, pulse limit, weight and sex. The initial display prior to input is as in the drawing. The numeric for age is blink- ing.
(ml/kg min) 60 54 48 42 36 30 24 18 12 6 0 (Age) 20s 30s 40s 50s 60s (ml/kg min) 60 54 48 42 36 30 24 18 12 6 0 (Age) 20s 30s 40s 50s 60s 1.5 kg 1.8 kg 2.2 kg 2.2 kg 2.6 kg 3.0 kg 3.0 kg 3.3 kg 3.5 kg 1.2 kg 1.8 kg 2.5 kg 1.0 kg 1.1 kg 1.4 kg 1.5 kg 1.
28 TIME PLL TM TPL AGE min:sec bpm AUTO TIME WARM kg · m TM min:sec watt kg · m rpm AUTO Select the Automatic Training Program Automatic training 1 2 Input Conditions • For program selection see the Starting up section page 18. • Input age, pulse limit, exercise time and the target pulse rate.
30 Select the Isopower Training Program Isopower (constant load) training 1 2 Input Conditions • For program selection see the Starting Up section page 18.
32 • After printing out the conditions, the LCD changes as in the drawing. • Load pattern is displayed in the graphic section, and the dot at the far left is blinking. 1 dot in the horizontal axis indicates 15 seconds; 1 dot in the vertical axis indicates 0.
34 • After setting your conditions, adapt the earlobe pulse sensor and depress ADV button to start program. • After printing out the conditions, the LCD changes as in the drawing. • The hill pattern is shown in the graphic section, and the dot at the far left is blinking.
36 Select the Manual Training Program 1 2 Input Conditions • For program selection see the Starting up section page 18. • Input age, pulse limit, exercise time, and the setting torque value. The initial display prior to input is as in the drawing.
38 TIME kg · m PLL TM AGE TTQ min:sec kg · m HILL TIME TM PRF min:sec kg · m HILL Y ou can create your own training pattern as desired, for both interval training and hill profile training, and can keep them in memory for future use. Enjoy your exercise under your original training program on this model.
40 MANU HILL INTVL AUTO CONST TEST ABCDEFGHI 9 8 7 6 5 4 3 2 1 0 DATA CARD To record your conditions to the data card, scratch off the appropri- ate silver part on the back of the card with a coin etc. This removal al- lows the photo scanner in the con- trol unit to detect the position of the exposed part.
1 External computer control via an RS232C terminal 2 Using chestbelt heart rate sensor 3 Setting the date 4 Printing mechanism 5 T roubleshooting and handling care 6 W arranty service and optional par.
44 External computer control via an RS232C terminal If you connect the optional "RS232C Communication Kit," the Ergo- ciser™ can communicate with an external computer.
46 Wireless chestbelt sensor picks up your heart rate In place of the earlobe pulse sensor, the EC-3700 can also receive your pulse signal transmitted from a particular type of wireless chestbelt sensor.
48 Inserting printer paper 1. Pull out the paper case at the bottom of the control unit and detach it. 2. Cut the edge of the thermal paper to a point with a scissors (as illus- trated). 3. Insert the paper roller into the paper roll, and place the roll in the case in the correct position and direction as illustrated.
50 T roubleshooting Connect the AC adaptor correctly. (see page 14) Is the power switch on? Problem Item to check Countermeasure Is the power supply connected? Display does not appear. Turn the power on. Replace the AC Adapter if its inte- rior circuit or the cable is dam- aged.
52 D A T A C A R D R W arranty service • Cat Eye Co., Ltd. warrants that the Cateye Ergociser™ Model EC- 3700 is free from material defects and malfunctions under correct and normal use for three (3) years from the date of purchase.
CO . , L TD. R 0689221 (E) 2-8-25, Kuwazu, Higashi Sumiyoshi-ku, OSAKA, 546-0041 JAPAN PHONE: 81-6-6719-7781 FAX: 81-6-6719-2362.
Ein wichtiger Punkt beim Kauf des Geräts Cateye EC-37OO (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cateye EC-37OO noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cateye EC-37OO - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cateye EC-37OO reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cateye EC-37OO erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cateye EC-37OO besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cateye EC-37OO verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cateye EC-37OO. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cateye EC-37OO gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
