Benutzeranleitung / Produktwartung Gateway None des Produzenten 2Wire
Zur Seite of 139
2Wire Gateway User Guide.
Notice to Users ©2007 2Wire, Inc. All rights reser v ed. This manual in whole or in par t, ma y not be reproduced, translated, or reduced to an y machine- readable form without prior written approval.
1 Contents Introduction Networking Technology Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 System Tab Viewing Your System Summary . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 2 Setting up a Private Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Setting Up a Public Routed Subinterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 3 Local Network - Wireless Settings Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Customizing Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Introduction The 2Wire gatew a y allows you to create a network wi th your computer s and peripheral devices. Following are just a few of the benefits derived from using t he 2Wire gate wa y to networ k your home or office. High performance integrated modem.
2 System Tab This chapter describes the 2Wire gate way System features. V iewing Y our Sy stem Summar y The System Summar y page provides general informat ion and links to your system’ s most commonly used features. T o access the System Summar y page: • Open a W eb browser and access the gatew ay user interface b y entering http://gatew ay .
System T ab 3 Network at a Glance Panel The Network at a Glance panel provides a summar y of the System, Broadband Link, and Home Networ k states of your gatew ay .
System T ab 4 Click the Privacy policy link to review the 2Wire privacy policy . Broadband Link Area of t he Network at a Glance Panel The Broadband Link area of the Network at a Glance panel displays the o verall status of your gatewa y’ s physical connectivity .
System T ab 5 Accessing the Home Networ k Summar y Page The Home Network Summar y page displa ys infor mati on about the devices installed on your network.
System T ab 6 Setting a Sy stem Pa ssword Setting a system password protects your gatewa y setti ngs from being modified or changed b y someone who has not been given permission to do so.
System T ab 7 4. Optional: In the Enter Y our Hint field, enter a hint. A hint is a word, phrase, or question that reminds you what the password is. There is an I forgot the password link on the password entr y page. When you click this link, it shows you your hint and allows you to enter your password.
System T ab 8 T o obtain access to your system: 1. In the System K ey field enter the 10- digit system ke y located on the bottom of your gatewa y . 2. In the Enter New P assword field, enter a new system password. In the Confirm New Password field, re- enter the system password.
System T ab 9 V iewing Sy stem Details The System Details page provides information about your gate wa y , any enhanced ser vices you may ha ve, and provides a link that you can use to restar t your system. T o view the System Details page: • Open a W eb browser and access the gatew ay user interface b y entering http://gatewa y .
10 Broadband Link Tab This chapter describes the 2Wire gate way Broadband Link features, and provides detailed instructions on how to customize your broadband settings.
Broadband Link T ab 11 Connection Speed Connection Speed shows the incoming and outgoing data rates of your DSL connection, measured in kilobits per second (Kbps). Incoming is the speed of data flowing from the Internet to your networ k; Outgoing is the speed of data flowing from your network to the Internet.
Broadband Link T ab 12 Connection Details The View connection details link accesses the Broadband Link Details page, which displa ys technical information about your broadband connection. T echnical suppor t representatives use this infor mation to help troubleshoot problems with your broadband connection.
Broadband Link T ab 13 Item Description DSL Connection DSL Line (Wire P air) The DSL signal can be transmitted on Line 1 (inner pair) or Line 2 (outer pair). During installation, the gatew ay automatically detects on which line the DSL signal is being transmitted.
Broadband Link T ab 14 Username The name used to connect with your Internet Ser vice Prov ider (ISP). Y our user name was either assigned to you or configured by you durin g the install process. The correct user name is required to successfully connect to the Internet.
Broadband Link T ab 15 Primar y Domain Name Ser ver P ar t of the In ternet address settings. A domain name is a meaningful, easy-to-remember “handle” for an Internet address. The DNS allows Internet users to specify a name (domain name) to reach a W eb page (for example, www .
Broadband Link T ab 16 Monitor Internet Connection The Monitor Internet connection link launches the Speed Meter . The S peed Meter measures the actual rate at which data is coming into (Incoming Kbps) and goin g out of (Outgoing Kbps) your system. It measures real-time data throughput in Kilobits per second and displa ys in one-second inter vals.
Broadband Link T ab 17 • Click the Diagnostics link under the tab to open the Broadband Link Diagnostics page. Figure 9. Broadband Link Diagnostics Page T o update the broadband link status, click REFESH . T o initiate a full test of your broadband link, click TEST .
Broadband Link T ab 18 • Click the Statistics link under the tab to open the Vi ew Broadband Link Statistics page. Figure 10. V iew Broadband Link Statistics P age The T ransmit and Receive Data panel displa ys the following inform ation. • T ransmit.
Broadband Link T ab 19 The Data Error s panel displa ys the following information. Data Error Description A T M Cell Header Errors The number of A TM cell header CRC error s since the 2Wire gatew ay was last restarted, and the elapsed time since the last cell header error .
Broadband Link T ab 20 Using Advanced Settings The Advanced Settings page allows you to manually configure your DSL and Internet connection settings. T ypically , these settings are automatically provided b y your ser vice provider . Y ou should adjust these settings ONL Y if you are ver y familiar with DSL and networking technolog y .
Broadband Link T ab 21 • Click the Advanced Settings link under the tab to open the Broadband Link Advanced Settings page. Figure 11. Broadband Link Advanced Settings P age Modifying DSL and A TM Settings By default, the gatew ay automatically detects which DSL line to use.
Broadband Link T ab 22 3. F rom the A TM Encapsulation drop-down menu, select Bridged LLC, Bridged VC-Mux, Routed LLC, or Routed VC-Mux. 4. In the A TM/PVC Search field, click the Enabled or Disabled ra dio button. 5. Click SA VE . Modifying Broadband Connection Settings The Broadband Connection panel allows you to modify your broadband connection.
Broadband Link T ab 23 Modifying the Broadband IP By default, the gatew ay automatically obtains its Internet address. The Broadband IP panel allows you to manually configure your Internet address settings. 1. Click the Manually configure IP address settings radio button.
24 Home Network Tab This chapter describes the 2Wire gate way Home Netw ork features, and provides detailed instructions on how to customize your network settings. V iewing Y our Home Network Summar y The Home Network Summar y page displa ys infor mation about the devices installed on your network.
Home Network T ab 25 Each device on your home network is represented with a computer icon. If the “show inactive devices” option is enabled, and the de vice becomes inactive because it is powered off or remo ved from your networ k, this icon will display as Inactive.
Home Network T ab 26 Depending on the permissions you ha ve set for devices on your network, the following links may displa y next to the device: • Access shared files. Accesses the shared files av a ilable from this computer . This feature only works with Microsoft Windows computers that have shared files and file sharing installed.
Home Network T ab 27 • Click the Wireless Settings link to open the Configure the Wireless Network page. Figure 13. Configure the Wireless Network Page.
Home Network T ab 28 The Current Settings panel shows the 2Wire gatewa y’ s wireless access point settings: • Access Point. The designated n ame of the wireless access point.
Home Network T ab 29 Configuring MAC Filtering The Media Access Control (MAC) address is a unique number assigned to computer hard ware. When setting up your network, you can set your Wireless Broadband Router to give access only to cer tain MAC addresses.
Home Network T ab 30 • DTIM P eriod (seconds). Determines at which inter val the a ccess point will send its broadcast traffic. The default value is 4 seconds. • Maximum Connection Rate. The maximum rate at which your wireless connection works (1, 2, 5.
Home Network T ab 31 • Click the Advanced Settings link under the tab to open the Edit Advanced Home Networ k Settings page. Figure 14. Advanced Home Network Settings Page.
Home Network T ab 32 1. Click the radio button that corresponds to the IP address range you wish to use. If you select the 172.16.0.0 / 255.255.0.0 or 10.0. 0 .0 / 255.255.0.0 range, continue to step 5. If you select Configure manually , continue to step 2.
Home Network T ab 33 Setting Up a Public Proxied Subnet The Public Proxied Subnet pane allows you to creat e a local network that has broadband-accessible IP addresses. Public Proxied Subnet is a public network in which the local networ k is an extension of the broadband network and does not require any special routin g.
34 VoIP Network Tab This chapter describes the 2Wire gate wa y V oIP Netw or k features, and provides detailed instructions on setting up a V oIP network. Configuring the V oIP Phones T o configure V oIP via the gatewa y user interface, follow these steps.
Vo I P N e t w o r k T a b 35 3. Click NEXT to continue. The Set Up Phones (Step 1: Phone Wiring) pa ge displa ys. Follow the on-scre en instructions. 4. Click NEXT . The Step 2: Set Up Phone Lines page opens. Activate a line by checking the box next to Phone Number/Userid.
Vo I P N e t w o r k T a b 36 and password in the Auth Username and Auth P ass word boxes under the Credentials subheading. Click SUBMIT to continue. Next, the Phone Settings page opens. 6. The Phone Settings page allows you to match each telephone to a phone line.
Vo I P N e t w o r k T a b 37 7. In the Phone Name field, select a name to associate with the phone. If you ha ve more than one digital voice line, in the Assign Number field select the phon e line you wish to associate with this phone. Click SUBMIT to continue.
Vo I P N e t w o r k T a b 38 9. Congratulations, setup is complete. Click DONE to return to the V oice Network summar y page. If you want to change your settings, go to the System Summar y page, then click the V oice Network tab. Once the V oIP ser ver configuration settin gs have been implemented, open a browser and enter http:// gatewa y .
39 Firewall Tab This chapter describes the 2Wire gate way fire wall f eatures, and pro vides detailed instructions on how to modify the firew all settings. F irew all Features The 2Wire gatew a y has a professional-grade firew all to help prevent unauthorized users from accessing your local network.
F irew all T ab 40 V iewing Y our F irew all Summar y The Firewall Summar y page provides summar y informat ion and links to the most commonly used security- related features of your system. T o access the F irewall Summar y page: • Open a W eb browser and access the gatew ay user interface b y entering http://gatew ay .
F irew all T ab 41 Click VIEW DET AILS to access the Firewall Details page, which shows a list of all the devices that ha ve applications configured in the firew all and the details of these configurations.
F irew all T ab 42 • Click the F irewall Setti ngs link under the tab to open the Edit Firewall Settings page. Figure 17. Edit F irew all Settings P age 1. F rom the Select a computer pull-down menu, select the computer that you wish to host the applica tion.
F irew all T ab 43 T o stop hosting an application: 1. In the Hosted Applications panel, select the application you wish to stop hosting. 2. Click the < REMOVE button.
F irew all T ab 44 • In the Applications panel, click the Add a new us er-defined application link to open the Edit Application page. Figure 18. Edit Application Page.
F irew all T ab 45 1. In the Application Name field, enter a name for the application p rofile. Y ou can enter an y name you lik e, although it’ s recommended that you use the name of the application (for example , Redwing Game Ser ver). 2. In the Definition panel, create a definition for your application.
F irew all T ab 46 • In the Applications panel, click the Edit or delete user-defined app lication link. The Select a Hosted Application page opens. Figure 19. Select a Hosted Application Page 1. In the User-Defined Application Profiles panel, high light the application you wish to edit or delete.
F irew all T ab 47 Because all filtered traffic is forwarded to the desig nated computer , you should use DMZplus mode with caution. A computer in DMZplus mode is less secu re because all a v ailable por ts are open and all incoming Internet traffic is directed to this computer .
F irew all T ab 48 3. Click DONE . 4. Access the computer that you selected in step 1. 5. Confirm that the computer is configured for DHCP . If it is not, configure it for DHCP . 6. Restar t the computer . When the computer restar ts, it receives a special IP address from the system and all unassigned TCP and UDP por ts are forwarded to it.
F irew all T ab 49 • Click the F irewall Log link under the tab to open the View Firewall Log page. Figure 21. V iew Firewall Log P age The following table provides additi onal in formation about the log entries. Click CLEAR LOG to clear the log. Severity • Info.
F irew all T ab 50 Configuring the F irew all (Advanced) The Edit Advanced Firewall Settings page allows you to configure advanced features on your fi rew all. Figure 22. Edit Advanced F irew all Settings P age Note: These features should be used only if you ar e thoroughly familiar with fire walls and networking .
F irew all T ab 51 Enabling Advanced Security Y our 2Wire gatewa y fire wall already pro vides a high leve l of security . Y ou can configure the firew all to provide advanced security features, including stealth mode, strict UDP , or block pings.
F irew all T ab 52 • Click the Advanced Settings link under the tab to open the Edit Advanced Firewall Settings page. 1. In the Security pane, click the Stealth Mode checkbox.
F irew all T ab 53 Block Ping Ping is a basic Internet program that, when used without malicious intent, allows a user to verify that a par ticular IP address exists and can accept requests. Pi ng is used diagnostically to ensure that a host computer you are tr ying to reach is operating.
F irew all T ab 54 Strict UDP Session Control Enabling this feature provides increased security by pre venting the 2Wire gate wa y from accepting packets sent from an unknown source over an existing connection.
F irew all T ab 55 Allowing Inbound and Outbound T raffic The Inbound and Outbound Control pane displa ys some common protocol types. When one of the Inbound protocol boxes is checked, the fire wall allows the co rresponding protocol to pass through from the Internet to the network.
F irew all T ab 56 The following table lists the attacks for which the gatew ay firew all filters continuously check. T o disable attack detection for a specific por t: • Open a W eb browser and access the 2Wire gatew a y user interface by enterin g http://gatew ay .
F irew all T ab 57 • Click the Advanced Settings link under the tab to open the Edit Advanced Firewall Settings page. Figure 23. Edit Advanced F irew all Settings P age 1. In the Attack Detection panel, deselect the appropriate checkbox. 2. Click SA VE .
58 Management and Diagnostic Console This chapter describes the 2Wire gate way Manag ement and Diagnostic Consol e (MDC). The Management and Diagnostic Console provides information about the status of.
Management and Diagnostic Console 59 Local Network Device List Wireless Configure F irew all Settings Detailed Information Advanced Settings Vo i c e S u m m a r y Configure Ser ver Configure Line Ass.
Management and Diagnostic Console 60 Sy stem Summar y P age The System Summar y page shows general infor mation about the 2Wire gatew ay , its configuration, and components. For example, it shows the hard ware and softw are version being used by the 2Wire gatew ay .
Management and Diagnostic Console 61 Remote Management Feature Management and Diagnostic Console pages that affect gatew ay configuration can be accessed remotely only if your organization has enabled the Remote Manag ement feature. If the feature is not enabled, an error message will display when you click the link to access the following pages.
Management and Diagnostic Console 62 Sy stem Summar y Page The System Summar y page shows general infor mation about the 2Wire gatew ay , its configuration, and components.
Management and Diagnostic Console 63 Hardw are V ers ion 2Wire gatew ay hard ware version. Hardw are Options The type of peripheral device installed. DSL Modem T ype ADSL or ISDN. Current Software 2Wire gate way softw are ver sion. Configuration Ke y Code The ke y code associated with the current provisioning settings.
Management and Diagnostic Console 64 Broadband Link - Summar y P age The Broadband Link - Summar y page allows you to view 2Wire gate wa y broadband connectivity-related settings, and reset the Broadband Link and ISP Connection.
Management and Diagnostic Console 65 Current Status The current operating condition of the broadband link. Fully operational. The broadband link is operational (including connection to ISP and other ser vices). Initializing. The broadband link is preparing to connect.
Management and Diagnostic Console 66 If there is an error on the broadband link or with the ISP connection, click the Rese t Broadband Link or Reset ISP Connection button to reset the connections. Primar y DNS The IP address of the pr imar y DNS ser ver that the 2Wire gatew a y is to use for DNS name resolution on the broadband link.
Management and Diagnostic Console 67 Broadband Link - Statistics P age The Broadband Link - Statistics page shows statisti cs associa ted with the 2Wire gatewa y broadband link.
Management and Diagnostic Console 68 T o reset the broadband link statistics, click the Reset button. Current Connection Current Noise Margin. The curr ent downstream and upstream noise margin in dB. Current Attenuation. The cur rent downstream and upstream DSL attenuation in dB.
Management and Diagnostic Console 69 Broadband Link - Detailed DSL Statistics P age The Broadband Link – Detailed DSL Statistics page show s a se t of cumulative DSL statistics associated with the 2Wire gatew ay .
Management and Diagnostic Console 70 The Broadband Link – Detailed DSL Statistics page includes the following information: Item Description AT M Cell Header Error s The number of A TM cell header CRC error s since the 2Wire gatew ay w as last restar ted, and the elapsed time since the last cell header error .
Management and Diagnostic Console 71 T o reset the DSL statistics, click the Reset button. Cumulative Sec.w/Severe Error s The number of severely errored seconds since the 2Wire gatew ay w as last restar ted, and the elapsed time since the last severely errored second.
Management and Diagnostic Console 72 Broadband Link - Configuration P age The Broadband Link – Configuration page allows y ou to modify specific broadband connection settings.
Management and Diagnostic Console 73 Modifying DSL and A TM Settings By default, the gate w ay automatically detects which DSL line to use. The DSL and A TM Settings pane allows you to select a DSL line and manually configure your A TM settings. T o modify DSL or A TM settings: 1.
Management and Diagnostic Console 74 Modifying Hardw are Add ress By default, the 2Wire gatew ay uses its built-in har dw are address. The Internet Connection Settings - Hardw are Address Over ride pa.
Management and Diagnostic Console 75 Local Networ k - Status P age The Local Network – Status page show s the status of the local networ k. Figure 29. MDC Local Network Status Page The Local Network – Status page includes the following infor mation: Item Description IP Gatew ay The IP address allocated to the 2Wire gatew ay .
Management and Diagnostic Console 76 DHCP Timeout The time, in minutes, before the DHCP lease must be renew ed. Devices Ethernet The number of Active and Inactive Ethernet devices on the network. Wireless (802.11) The number of Active and Inactive wireless devices on the network.
Management and Diagnostic Console 77 Local Networ k - Statistics P age The Local Network – Statistics page shows infor m ation about the interfaces on the local network.
Management and Diagnostic Console 78 T o reset the local network statistics, click the Reset button. Receive The cumulative number of frames received o ver the Ethernet home networ k interface, the number of pa yload bytes received, and the number and percentage of received packets in error .
Management and Diagnostic Console 79 Local Networ k - Device List P age The Local Network - Device List page displays information about each device in the local network. Figure 31. MDC Local Network Device List Page The following information is displayed.
Management and Diagnostic Console 80 Local Networ k - Wireless Settings P age The Local Network - Wireless Settings page allows you to view or change the wireless settings with which your gatew ay is configured.
Management and Diagnostic Console 81 The Settings panel allows you to change the Network Name and Wireless Channel, and enable SSID broadcast. Customizing Security Settings Y ou should always ena ble encr yption for wireless communication.
Management and Diagnostic Console 82 Local Networ k - Configuration P age The Local Network - Configuration page allows you to change the gatewa y’ s default local network settings. Y ou must click the Submit button for changes to take effect. Figure 33.
Management and Diagnostic Console 83 Public Routed Subinterface Settings The Public Routed Subinterface pane allows you to create a local network that has broadband network- accessible IP addresses by creating a route from the Internet to the public network specified.
Management and Diagnostic Console 84 F irew all - Settings Page The Firewall - Settings p age allows you to configure the fire wall to pass through specific application data to a selected computer . Figure 35. MDC F irew all Settings P age Note: T o access this page, your organization mu st ha ve the Remote Management feature enabled.
Management and Diagnostic Console 85 Hosting an Application T o host an application on the gatewa y’ s network for Internet user s to access (such as a W eb ser ver), the firew all must be configured to allow users on the Internet to access it. T o host an application: 1.
Management and Diagnostic Console 86 T o create an application profile: 1. Click the Add a new user-defined applicati on link. The Edit Application page opens. Figure 36. MDC F irew all Edit Application P age 2. In the Application Name field, ent er a name for the application profile.
Management and Diagnostic Console 87 Allowing all applications DMZplus is used for hosting applications if an application will not operate properly using the “ Allow individual application(s)” option. When in DMZplus mode, the designated computer : • Shares the gatew ay’ s IP address.
Management and Diagnostic Console 88 F irew all - Detailed Infor mation Page The Firewall - Detailed Information page shows detailed information about the gatewa y’ s firewall.
Management and Diagnostic Console 89 F irew all - Advanced Settings Page The Firewall - Advanced Settings page allows you to configure the gatew a y’ s firewall. Figure 38. MDC F irew all Advanced Settings P age Note: T o access this page, your organization mu st ha ve the Remote Management feature enabled.
Management and Diagnostic Console 90 Enabling Security Features The Security pane allows you to configure the gatew ay’ s firew all to provi de additional security features. Following are descripti ons of the features. Stealth Mode. Enabling Stealth Mode suppresses error responses (for example, TCP resets).
Management and Diagnostic Console 91 V oice Ser ver - Summar y Pa ge The V oice Ser ver - Summar y page shows summar y in formation about the voice line(s) and their profile mappings. Note: This link is present only if the 2Wire gatew ay is V oIP-enabled.
Management and Diagnostic Console 92 V oice - Configure Ser ver Pa ge The V oice - Configure Ser ver page allows you to edit a pr ofile that is associated with your V oIP ser vices, and is used primarily for test purposes. Figure 39. MDC V oice Configure Ser ver Page Note: This link is present only if the 2Wire gatew ay is V oIP-enabled.
Management and Diagnostic Console 93 The Edit V oIP Settings panel displays the current SI P settings, and allows you to edit the settings. The following table describes the fields. By default, the Show CID Names and Require Authentication checkboxes are check ed.
Management and Diagnostic Console 94 5. F rom the left na vigation field under the V oice subheading , click Configure Line Association . The V oice - Associate Ser ver page opens. 6. Choose a line and associate it with a ser ver from t he pull-down menu.
Management and Diagnostic Console 95 7. The V oice Ser ver - Summar y page displa ys. Active profiles are list ed, as are Line/Profile associations. T o make any changes, return to the previous step.
Management and Diagnostic Console 96 T roubleshooting - DSL Diagnostics Page The T roubleshooting - DSL Diagnostics page displays data associated with the 2Wire gatew ay’ s DSL link.
Management and Diagnostic Console 97 Analyzing General Infor mation The General Information pane shows diagnostic infor m ation for the current DSL connection (or connection attempt). These values are also listed in the last row of the T raining Histor y pane.
Management and Diagnostic Console 98 Reviewing T raining Hist or y The T raining Histor y pane provides a record of the last 20 connection attempts. The current connection or connection attempt is displayed in the last row . Impulse Noise Comp. T ones Indicates the number of compensation tones on which impulse noise is detected.
Management and Diagnostic Console 99 Max 2 Latest estimate of maximum achievabl e rate adjusted for changing line conditions. Max 3 Current or final estimated maximum achievable rate without impulse noise compensation. Mgn 1 Noise margin (in dB) at the star t of the connection.
Management and Diagnostic Console 100 Revie wing Bitloadi ng The Bitloading pane shows the bits loaded per tone for the upstream (tones 6 to 31) and downstream (tones 32 to 255) spectrum. A single hex-digit for each tone shows the numeric values (0 to F) in addition to the bar-graph depiction.
Management and Diagnostic Console 101 T roubleshooting - Event Log Page The T roubleshooting – Event Log page displa ys all security related events for the broadband and local network. Log infor mation is stored in an 8 KB buffer . When the buffer is full, the oldest items are purged from the log.
Management and Diagnostic Console 102 • HURL. Shows the Broadband Redirect messages that ha ve been enabled by a ser vice provider . • Modem. Shows the current modem log , which registers all significant modem-related events.
Management and Diagnostic Console 103 T roubleshooting - Networ k T ests Page The T roubleshooting – Network T ests page provides the Ping, T raceroute, and DNS Quer y tools, which help diagnose problems with the 2Wire gatew ay or 2Wire gatew ay connections.
Management and Diagnostic Console 104 T o perfor m a ping or traceroute test: 1. F rom the drop-down menu, select Ping or T raceroute. 2. In the Host field, enter the URL of the host location to which you wish the 2Wire gatew ay to send the ping or traceroute.
Management and Diagnostic Console 105 T roubleshooting - Upgrade Histor y Page The T roubleshooting - Upgrade Histor y page shows a log of all system software u pgrades, and lists the upgrades in the order in which they occurred. Figure 43. MDC T roubleshooting Upgrade Histor y Page The Upgrade Histor y page shows the following information.
Management and Diagnostic Console 106 T roubleshooting - Resets Page The T roubleshooting – Resets page allows you to re set various components associated with the 2Wire gatew ay network. Figure 44. MDC T roubleshooting Resets Page The Clear button in the Local Network field clear s all devi ces from the Local Network list.
Management and Diagnostic Console 107 The Reset button in the Broadband Link field allows y ou to reset the 2Wire gate wa y broadband link. For 2Wire gatew ay models with a DSL connection, th is means the DSL connection is reset. The Reset button in the Gatew ay field allows you to restar t the 2Wire gatewa y .
Management and Diagnostic Console 108 Advanced - Sy slog Settings Page The Advanced - Syslog Settings page allows users to ma intain a histor y of security events greater than the capacity of the 2Wire gatew ay b y enabling a syslog ser ver . Figure 45.
Management and Diagnostic Console 109 Advanced - Provisioning Info P age The Advanced – Provisioning Info page displa ys the parameters with which the 2Wire gatewa y was provisioned.
Management and Diagnostic Console 110 The gatew ay provisioning parameters are dynamic, and var y depending on the software version that the gatew ay is running. • Module Configuration. Configuration parameters fo r modules listed in the Advanced Link Manager States page.
Management and Diagnostic Console 111 Advanced - Configure T ime Ser vices P age The Advanced – Configure Time Ser vices page allo ws you to view and change system time and date settings.
Management and Diagnostic Console 112 T o manually set the time and date: 1. Check the Enable checkbox. 2. In the Time field, enter the time in 24-hour HH:MM:SS format (for example, 10:02:11). 3. In the Date field, enter the date in YYY Y/MM/DD format (for example, 2006/10/09).
Management and Diagnostic Console 113 Advanced - Configure Ser vices P age The Advanced – Configure Ser vices page allows you to enable the 2Wire gatew a y to operate in bridged mode, change the timeout settings for NA T , enable not ification messages, enable the SIP ALG, and change the upstream maximum transmission rate.
Management and Diagnostic Console 114 IMPORT ANT: Bridged mode is intended for testing purposes onl y , as in WT -062 (ADSL), BER (Bit Rate Error), or industr y standard performance tests.
Management and Diagnostic Console 115 c. Click Internet Protocol (TCP/IP), then click the Proper ties button. d. In the General tab, click the Use the following IP addr ess radio button. In the IP address field, enter an IP address between 172.16.1.1 to 172 .
Management and Diagnostic Console 116 f. If required, reboot the system for the changes to tak e effect. 2. Attach the computer to the Local Network por t of the 2Wire gatewa y . 3. In the W eb browser address bar , enter 172.16.0.1/management. 4. Click Configure Ser vices.
Management and Diagnostic Console 117 T o change the gatewa y’ s upstream MTU: 1. In the Force Upstream MTU field, enter t he value specified b y the ser vice provider .
Management and Diagnostic Console 118 Advanced - Static Routes The Advanced - Static Routes page allows you to m anually configure static routes that specify the transmission path data must follow between de vices on the gatewa y network. Figure 49. MDC Advanced Static Routes Page T o define a static route: 1.
Management and Diagnostic Console 119 The Route List shows a list of stat ic routes defined b y the user . For each user-defined static route, the following information is displayed: • Subnet IP •.
Management and Diagnostic Console 120 Advanced - DNS Resolve P age The Advanced - DNS Resolve page allows users to name network devices (such as printers or W eb ser vers) so that they ma y be easily accessed by other users on the networ k. Figure 50.
Management and Diagnostic Console 121 Advanced - T raffic Shaping P age The Advanced - T raffic Shaping page allows user s to change the 2Wire gatew ay’ s maximum upstream connection rate. Figure 51. MDC Advanced T raffic Shaping Page T o change the gatewa y’ s upstream connection rate: 1.
Management and Diagnostic Console 122 Advanced - Link Manager States P age The Advanced – Link Manager States page is a tree r epresentation of the 2Wire gatew ay interface stack, and shows the internal state of the 2Wire gatewa y .
Management and Diagnostic Console 123 T o view infor mation about each node, click the node link. Information displays below the Link Manager States tree, and includes the following: Node Information Description Link status Up. The link is functioning properly .
Management and Diagnostic Console 124 The following table shows the possible nodes that can displa y on the Link Manager States page. The nodes that display are dependent on the 2Wire gate wa y . For example, 2Wire gatew ays that are not connected to the Internet via ADSL will not display ADSL information.
Management and Diagnostic Console 125 Advanced - Detailed Log Page The Advanced – Detailed Log page is a debug log facility modeled after syslog, and provides advanced diagnostic capabilities. Figure 53. MDC Advanced Detailed Log Page Note: The Detailed Log retains a persistent (across upgrades and system restar ts) record of gatew a y events.
Management and Diagnostic Console 126 F rom the Filter pull-down menus, you can select the level of filtering you w ant to view (for example, DBG or higher) and the specific gatew ay component that w as affe cted.
Management and Diagnostic Console 127 dhcpd DHCP ser ver dsl DSL modem and DSL control module dslice DSL hardware eth Ethernet device ethatm Ethernet to A TM bridge (1483) fw Firewall gpio GPIO (gener.
Management and Diagnostic Console 128 netdev Networ k device core nodesd Networ k device status daemon pdump P acket dump (used for debu gging) pkg P ackage management pki P ublic K ey Infrastructure .
129 Glossary A Access P oint. A device that transpor ts data betw een a wirele ss networ k and a wired network. With the help of the system, a wireless base station is an example of an access point that acts betw een a wireless node and with other wired PCs and peripherals.
Glossar y 130 IP Address. A numeric identifier for your computer . Just as the post office delivers mail to your home address, ser ver s know to deliver data to your co mputer based on your IP address.
Glossar y 131 PPPoA (P oint-to-Point Protocol o ver A TM). A specification for connecting multiple computer u sers on an Ethernet LAN to a remote site through common cust omer premises equipment (such as a modem).
Glossar y 132 SYN Flood. A method that the user of a hostile client pr ogram can use to conduct a denial-of-ser vice (DOS) attack on a computer ser ver . The hostile client r epeatedly sends SYN (synchronization) packets to e ver y por t on the ser ver , using fake IP addresses.
Glossar y 133 The preferred channel separation between the channels in neighboring wireless networks is 25 MHz (5 channels). This means that you can apply up to three di fferent channels within your wireless network. There are only 11 usable wireless channels in the United St ates.
134 Regulator y Information Declaration of Conformity T rade Name: 2Wire Responsible P ar ty: 2Wire, Inc. Address: 1704 Automation Parkwa y San Jose, CA This device complies with P ar t 15 of the FCC rules.
Ein wichtiger Punkt beim Kauf des Geräts 2Wire Gateway None (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie 2Wire Gateway None noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für 2Wire Gateway None - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von 2Wire Gateway None reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über 2Wire Gateway None erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon 2Wire Gateway None besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von 2Wire Gateway None verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit 2Wire Gateway None. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei 2Wire Gateway None gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
