Benutzeranleitung / Produktwartung TE-4500F des Produzenten Casio
Zur Seite of 124
ELECTR ONIC CASH REGISTER TE-4000F TE-4500F User’ s Man ual Intr oduction Setting Up Getting Star ted P aper Installation Set Date/time Intr oducing the T erminal Displa y/Ke yboar d Sheet Holder Ba.
.
Introduction & Contents TE-4000F/4500F User's Manual 3 E Casio Electronics Co., Ltd. Unit 6, 1000 North Circular Road London NW2 7JD, U.K. WARNING: This is a Class A product. In a domestic en vironment this product may cause radio interference in which case the user may be required to take adequate measures.
4 E Safety Precautions • T o use this product safely and correctly , read this manual thoroughly and operate as instructed. After reading this guide, keep it close at hand for easy reference. Please keep all informations for future refer ence. • Always observ e the warnings and cautions indicated on the product.
Introduction & Contents TE-4000F/4500F User's Manual 5 E W arning! Never try to take the register apart or modify it in any wa y . High-voltage components inside the register create the danger of fire and electric shoc k. • Contact CASIO service representati ve for all r epair and maintenance.
Intr oduction & Contents 6 E Introduction & Contents ........................................................................................................ .... 3 Getting Star ted .............................................................
Introduction & Contents TE-4000F/4500F User's Manual 7 E Registering reductions ......................................................................................................... ...................... 43 Reduction for items ..........
Intr oduction & Contents 8 E Electronic benefits transf er ................................................................................................... ..................... 75 About mixed EBT card tenders ..................................
Introduction & Contents TE-4000F/4500F User's Manual 9 E Printing read/reset repor ts .................................................................................................... ....... 102 T o pr int the individual depar tment, PLU/flat-PLU read repor t .
10 E This section outlines ho w to unpack the cash register and get it ready to operate. Y ou should read this part of the manual e ven if you ha v e used a cash register before. The follo wing is the basic set up procedure, along with page references where you should look for more details.
Getting Started TE-4000F/4500F User ’ s Manual 11 E Mount the cash register . 1. Scre w in 2 fixing scre ws bottom side of the register . 2. Stick rubber plate on the each corner of the bottom side of the re gister .
Getting Star ted 12 E Important! Take away the head protection sheet from the printer and close the platen arm. Caution! (in handling the thermal paper) • Never touch the printer head and the platen. • Unpack the thermal paper just before your use.
Getting Started TE-4000F/4500F User ’ s Manual 13 E Step 1 T urn the mode switch to REG1 position. Step 2 Remove the pr inter cover . (If the cover is locked, unlock by using the printer cover key before this step.) Step 3 Open the platen arm. Complete Close the printer cov er , passing the leading end of the paper through the cutter slot.
Getting Star ted 14 E T o install journal paper Step 1 T urn the mode switch to REG1 position. Step 2 Remove the pr inter cover . (If the cover is locked, unlock by using the printer cover key before this step.
Getting Started TE-4000F/4500F User ’ s Manual 15 E 6 1 s 6 : : : : : : 6 6 C Current date Example: April 3, 2004 2 040403 X1 Z1 X2/Z2 REG2 REG1 OFF RF PGM Mode Switch Year Month Day x or X 6 1 s 6 .
16 E T ake-up reel Printer Platen arm Roll paper Pop-up display Main display Contrast control knob Mode switch Keyboard Menu sheet holder Dallas key receiver (option) Printer cover Printer cover key Roll paper Y ou can use the roll paper to print receipts and a journal (pages 12 ~ 14).
Intr oducing TE-4000F/4500F TE-4000F/4500F User ’ s Manual 17 E T ak e-up reel Printer Platen arm Roll paper Pop-up display Main display Contrast control knob Mode switch Keyboard W etproof cov er Dallas key receiver (option) Printer cover Printer cover key Mode ke y (for U .
Intr oducing TE-4000F/4500F 18 E Mode switch Use the mode keys to change the position of the mode switch and select the mode you want to use. REG2 X1 REG1 Z1 OFF X2/Z2 RF PGM Mode Mode name Description switch OFF REG1 REG2 RF X1 Z1 X2/Z2 PGM Any of the mode control keys can be inserted and removed from the mode switch in this position.
Intr oducing TE-4000F/4500F TE-4000F/4500F User ’ s Manual 19 E When the cash drawer does not open! (f or medium size drawer onl y) In case of po wer failure or the machine is in malfunction, the cash drawer does not open automatically . Even in these cases, you can open the cash drawer by pulling dra wer release le ver (see belo w).
Intr oducing TE-4000F/4500F 20 E 5&78 TOTAL CHANGE 2ND@ RCT 3RD@ "70 T1 T2 T3 T4/FS TOTAL CHANGE AMOUNT RPT TA X 4 ST $27.83 Langue-de-chat Displa y Displa y panel Main displa y Customer disp.
Intr oducing TE-4000F/4500F TE-4000F/4500F User ’ s Manual 21 E 1 Amount/Quantity This part of the display shows monetary amounts. It also can be used to show the current time. 2 Item descriptor When you register a department/PLU/scanning PLU, the item descriptor appears here.
Intr oducing TE-4000F/4500F 22 E Ke yboar d (TE-4000F) C 789 456 123 00 0 • RECEIPT JOURNAL FEED FEED 91 82 73 6 4 55 4 6 37 2 8 19 09 9 1 0 8 81 72 63 5 4 45 3 6 27 1 8 08 99 8 1 0 7 71 62 53 4 4 3.
Intr oducing TE-4000F/4500F TE-4000F/4500F User ’ s Manual 23 E C 789 456 123 00 0 • RECEIPT JOURNAL FEED FEED VAT RC OPEN % – – RF CE # NS CH CR1 CR2 SUBTOTAL CHK/ TEND CA AMT TEND X DATE TIME 48 37 26 15 RECEIPT LOAN PICK UP ERR.
Intr oducing TE-4000F/4500F 24 E RECEIPT JOURNAL FEED FEED 789 456 123 00 0 • SUBTOTAL CA CH CR1 48 37 26 15 CR2 CHK/ TEND AMT TEND 25 34 43 52 61 70 79 88 97 106 81 62 43 34 25 16 06 97 88 79 6 1 0.
Intr oducing TE-4000F/4500F TE-4000F/4500F User ’ s Manual 25 E RECEIPT JOURNAL FEED FEED 789 456 123 00 0 • SUBTOTAL CA CH CR1 48 37 26 15 CR2 CHK/ TEND AMT TEND 25 34 43 52 61 70 79 88 97 106 81.
Intr oducing TE-4000F/4500F 26 E Allocatable functions You can tailor a keyboard to suit your particular type of business. Add check Use this key in a check tracking system to combine the details of more than one check into a single check. Arrangement Use this key to activate an arrangement program programmed in the arrangement file.
Intr oducing TE-4000F/4500F TE-4000F/4500F User ’ s Manual 27 E Open check Use this key to issue an open check report of an assigned clerk. Operator number Use this key to enter a clerk number during clerk transfer. Operator X/Z Use this key to issue a clerk ’ s individual X/Z report.
Intr oducing TE-4000F/4500F 28 E 1 2 4 3 How to remo ve/replace the sheet holder (TE-4000F onl y) Remove the sheet holder Follo w steps 1 ~ 2. Replace the sheet holder Follo w steps 3 ~ 4.
Intr oducing TE-4000F/4500F TE-4000F/4500F User ’ s Manual 29 E 1 1 U P UP UP UP Back side UP UP Back side 9 8 7 6 5 4 3 2 1 18 17 16 15 14 13 12 11 10 27 26 25 24 23 22 21 20 19 36 35 34 33 32 31 3.
30 E How to read the printouts • The journal and receipts are records of all transactions and operations. • The contents printed on receipts and journal are almost identical.
Basic Operations and Setups TE-4000F/4500F User ’ s Manual 31 E • Check to make sure that the cash register is plugged in securely . Page 11 • Check to make sure there is enough paper left on the roll. Pages 13, 14 • Read the financial totals to confirm that they are all zero.
Basic Operations and Setups 32 E Assigning a clerk On models a vailable in the United States and Canada, clerk or cashier assignment can be performed using clerk secret numbers only (clerk buttons are not equipped). In Germany , you can assign clerks by using clerk key or by clerk secret number (clerk key is equipped).
Basic Operations and Setups TE-4000F/4500F User ’ s Manual 33 E Displaying the time and date Y ou can show the time or date on the display of the cash reg ister whene ver there is no registration being made.
Basic Operations and Setups 34 E Unit price Department Preparing and using depar tment/flat-PLU ke ys Registering department/flat-PLU keys The following e xamples sho w ho w you can use the department/flat-PLU ke ys in v arious types of registrations.
Basic Operations and Setups TE-4000F/4500F User ’ s Manual 35 E Quantity (4-digit integer/2-digit decimal) Quantity being purchased (4-digit integer/2-digit decimal) Package quantity (4-digit integer/2-digit decimal) Package price Multiplication OPERA TION RECEIPT 12 X 1- ( s 20- F • The model for the U.
Basic Operations and Setups 36 E 6 3 s 6 0366 s 6 : : 6 6 s To another department/flat-PLU Same program D 2 D 1 Mode switch PGM Department Flat-PLU Programming procedure T o program high amount limit .
Basic Operations and Setups TE-4000F/4500F User ’ s Manual 37 E Registering department/flat-PLU keys by programming data Preset price OPERA TION RECEIPT " F Preset tax status OPERA TION RECEIPT 5 X # $ s 20- F • The model for the U.S./Canada, use x instead of X .
Basic Operations and Setups 38 E Preparing and using PLUs This section describes ho w to prepare and use PLUs. CA UTION: Before you use PLUs, you must first program the unit price and tax status. Pr ogramming PLUs T o program a unit price f or each PLU 6 3 s 6 0366 s 6 PLU No.
Basic Operations and Setups TE-4000F/4500F User ’ s Manual 39 E PLU code Quantity (4-digit integer/2-digit decimal) Mode switch REG Registering PLUs The following e xamples sho w ho w you can use PLUs in v arious types of registrations.
Basic Operations and Setups 40 E Split sales of packaged item OPERA TION RECEIPT 3 x 5 x 28 + s 15- F • If x is not allocated on the keyboard, k ey allocation is necessary . Open PLU OPERA TION RECEIPT 30 + 3280 : 31 + 13- : : s 60- F • Before registering an open PLU, it is necessary to preset it as an open PLU.
Basic Operations and Setups TE-4000F/4500F User ’ s Manual 41 E Shifting the taxable status of an item By pressing “ T ax Shift ” key , you can shift the taxable status of an item.
Basic Operations and Setups 42 E Applies the preset discount rate to the last item registered. The input value takes priority of the preset value. 6 1 s 6 : : : : 6 p 6 s Mode switch PGM Preset rate Example: 10% 2 10 5.
Basic Operations and Setups TE-4000F/4500F User ’ s Manual 43 E 6 1 s 6 : : : : : : 6 m 6 s Unit price Mode switch PGM Preparing and using reductions This section describes how to prepare and register reductions. Programming for reductions Y ou can use the m ke y to reduce single item or subtotal amounts.
Basic Operations and Setups 44 E Reduces the subtotal by the value input here. Reduction for subtotal OPERA TION RECEIPT 3- ! 4- " s 75 m s 7- F Dept. 1 $3.00 ————————— Item 1 Quantity 1 ———————–––– T axable (1) preset —————————— ——— Dept.
Basic Operations and Setups TE-4000F/4500F User ’ s Manual 45 E Registering credit and check payments The following examples show how to register credits and payments by check.
Basic Operations and Setups 46 E Registering both the Eur o and local currenc y The following e xample sho ws the basic operation using the currency e xchange function between the Euro and the local currency .
Basic Operations and Setups TE-4000F/4500F User ’ s Manual 47 E ~00l &00l ~00l &00l ~00 Case B OPERATION DISPLAY 12- ! P s P 6- a RECEIPT 1 Press the P ke y , which con verts the subtotal amount into the sub currency by applying the preset exchange rate.
Basic Operations and Setups 48 E Registering returned goods in the RF mode The following examples show how to use the RF mode to register goods returned by customers. Normal refund transaction OPERA TION RECEIPT 150 ! ! 6 X 2 + F • The model for the U.
Basic Operations and Setups TE-4000F/4500F User ’ s Manual 49 E Reduction of amounts paid on refund OPERA TION RECEIPT 4- # 15 m 2 + p s F Impor tant! • To avoid miss registrations in the RF mode, return the mode switch to the former position immediately.
Basic Operations and Setups 50 E Registering loan amounts Use this procedure to register loan or bank recei v ed from the of fice. OPERA TION RECEIPT 10 X 1- l 5 X 5- l a • The model for the U.S./Canada, use x instead of X . Registering pick up amounts Use this procedure to register pick up mone y from cash dra wer .
Basic Operations and Setups TE-4000F/4500F User ’ s Manual 51 E Making corrections in a registration There are three techniques you can use to make corrections in a r egistration. • T o cor rect an item that you input b ut not yet registered. • T o cor rect the last item you input and registered.
Basic Operations and Setups 52 E T o correct an item y ou input and registered OPERA TION RECEIPT 1- ! 2- " " e 2 + e 5 + 15 + 6- : e 15 + 10- : 8 X 4- $ e 6 X 4- $ s 50 p e s 5 p R 2- " e R 220 " s 20- F e 15- F c • The model for the U.
Basic Operations and Setups TE-4000F/4500F User ’ s Manual 53 E T o cancel all items in a transaction OPERA TION RECEIPT 1- ! 2- " 3- # 4- $ s e No sale registration Y ou can use the following procedure to open the dra wer without registering a sale.
Basic Operations and Setups 54 E Printing the daily sales reset report This report shows daily sales totals. OPERA TION REPORT 8 F Mode switch Z1 — Date/time — Clerk name/mc No.
Basic Operations and Setups TE-4000F/4500F User ’ s Manual 55 E RC No 4 •810.00 PD No 5 •520.00 •5.00 CORR No 14 •39.55 VLD No 19 RCT No 3 NS No 5 ----------------------------- Z DEPT 0001 0001015 DEPT01 203.25 •1,108.54 DEPT02 183 •1,362.
56 E Advanced Operations This chapter describes more sophisticated operations that you can use to suit the needs of your retail environment. Stoc k c hec k Each PLU has an actual stock totalizer that you can program with a minimum stock quantity . Then the re gister checks actual stock quantities against the programmed minimum stock quantities.
Ad vanced Operations TE-4000F/4500F User ’ s Manual 57 E Clerk 1 Clerk 2 Sign on Sign on Sign on Sign on Sign on Registration A Post receipt A Finalization A Finalization B Registration B <NEW BA.
58 E Advanced Operations Ad dition Addition (plus) Example OPERA TION RECEIPT 1- ! 10 B 3 X 2- ! 3 X B F • The model for the U.S./Canada, use x instead of X . Example 2 OPERA TION RECEIPT 3 X ! • The model for the U.S./Canada, use x instead of X .
Ad vanced Operations TE-4000F/4500F User ’ s Manual 59 E Premium (%+) Example OPERA TION RECEIPT 1- ! 10 U 3 X 2- ! s U F • The model for the U.S./Canada, use x instead of X . Dept. 1 $1.00 ———————— —— Item 1 Quantity 1 ———————— —— Premium 10% ————————————— Dept.
60 E Advanced Operations T ra y total T ra y total premium/discount The buf fer memory stores all items that f all into the prescribed range, starting from the f irst item registered for a transaction up to the point that <TRA Y TO T AL> (the tray total key) is pressed to perform a tray total premium/discount operation.
Ad vanced Operations TE-4000F/4500F User ’ s Manual 61 E Coupon transactions Note that errors result when the result of a calculation is negative if the cash register is programmed to prohibit credit balances. Coupon registration using <COUPON> (coupon ke y) Example OPERA TION RECEIPT 2 X 3- ! 2 X 50 H 4- # H F • The model for the U.
62 E Advanced Operations Registering the second unit price Second unit prices along with quantity modifiers can be programmed to PLUs. Pressing <PRICE SHIFT> (price shift ke y) calls up the second unit price, quantity modif ier , and descriptor .
Ad vanced Operations TE-4000F/4500F User ’ s Manual 63 E Example 3 The procedure shown above are for when the cash register is programmed not to maintain a second unit price shift. It is programmed is performed to maintain a second unit price shift, the following procedure applies.
64 E Advanced Operations Bottle link operation Y ou can link PLU to a PLU. Example OPERA TION RECEIPT 1 + 3 X 2 + 30- F • The model for the U.S./Canada, use x instead of X . Bottle returns Bottle return key Y ou can use the linked bottle return key to re gister a bottle return.
Ad vanced Operations TE-4000F/4500F User ’ s Manual 65 E Arrangement key registrations K ey operations can be assigned to an <ARRANGE> (arrangement k ey). Then, simply pressing <ARRANGE> performs all of the key functions assigned to it. K ey operations can also be assigned to an address code.
66 E Advanced Operations (Displays in ¥ : 3,150) (Displays in $) (Displays in $) (Displays in $) (5,000) Currency e xc hange function When <CE> (currency exchange key) is pressed, a current sub.
Ad vanced Operations TE-4000F/4500F User ’ s Manual 67 E P artial tender in a foreign currency * Pre-programmed exchange rate: ¥ 100 = $0.9524 Important! Partial tender in a foreign currency can be registered using a and k only. Other finalization keys cannot be used, but the remaining tender can be finalized using any finalize key.
Advanced Operations 68 E Food stamp function Food stamp registration No change due OPERA TION RECEIPT 1- ! 2- " K 3- # J 2- I a Dept. 1 $1.00 Item 1 ————————— T axa ble 1, F/S ————————— ———— Dept. 2 $2.
Adv anced Operations TE-4000F/4500F User ’ s Manual 69 E Mixed f ood stamp/cash change Example 1 OPERA TION RECEIPT 1- ! K 2- " K 3- # J 7- I The change in food stamp transactions is automatically calculated as cash for amounts of $1.00 or less, and as food stamps for amounts greater than $1.
Advanced Operations 70 E Mixed f ood stamp/cash change (continued … ) Example 3 OPERA TION RECEIPT 2- ! 50 $ J 5- I When food stamp items are included in a transaction, the amount of change due in cash is applied as a cash amount tendered for cash (nonfood stamp) items.
Adv anced Operations TE-4000F/4500F User ’ s Manual 71 E Food stamp registration (Illinois rule) No change due Example 1 OPERA TION RECEIPT 1- ! 2- ! 3- $ J 6- I Example 2 OPERA TION RECEIPT 2- ! 3- ! 4- $ J 5- I a Dept. 1 $1.00 Item 1 ————————— T axable 1, F/S ————————— ———— Dept.
Advanced Operations 72 E No change due (continued … ) Example 3 OPERA TION RECEIPT 2- ! 3- " J 1- I a In this case, the result of the taxable 1 amount is $1.00 (2.00 - 1.00), the taxable 2 amount is $3.00. Example 4 OPERA TION RECEIPT 1- ! 5- " J 4- I a In this case, the result of the taxable 1 amount is $0.
Adv anced Operations TE-4000F/4500F User ’ s Manual 73 E Mixed f ood stamp/cash change Example 1 OPERA TION RECEIPT 150 ! 2- ! 3- $ J 10- I The change in food stamp transactions is automatically calculated as cash for amount of $1.00 or less, and as food stamps for amounts greater than $1.
Advanced Operations 74 E Mixed f ood stamp/cash change (continued … ) Example 3 OPERA TION RECEIPT 2- ! 120 ! 30 # J 5- I When food stamp items are included in a transaction, the amount of change due in cash is applied as a cash amount tendered for cash (nonfood stamp) items.
Adv anced Operations TE-4000F/4500F User ’ s Manual 75 E Electr onic benefits transfer In addition to standard food stamp tender finalizations, this model also allows finalization for tenders electronic benefits transfer (EBT) card.
Advanced Operations 76 E Example 2 OPERA TION RECEIPT 1- ! 2- " 3- # J 5- B F Change due OPERA TION RECEIPT 1- ! 120 " 30 # J 5- B Dept. 1 $1.00 Item 1 ————————— T axa ble 1, F/S ————————— ———— Dept.
Adv anced Operations TE-4000F/4500F User ’ s Manual 77 E Inputting the n umber of customer s Example 1 OPERA TION RECEIPT 2 B 15- ! 5- " s F Example 2 Y ou can only use the following operation to re-input the number of customers when <CUST OMER> (customer number ke y) is preset to allo w re-input.
Advanced Operations 78 E T emporaril y releasing compulsion <OPEN 2> (open 2 key) can be programmed to release specific compulsion. Example 1 OPERA TION RECEIPT 10- ! 10- k 2- " B Example 2 OPERA TION RECEIPT 10- ! B 10- ! 10- k Unit price $10.
Adv anced Operations TE-4000F/4500F User ’ s Manual 79 E Printing slip T o perform batch printing on the slip printer , you must first use the memory alloca tion operation (see program 5 mode in the dealer ’ s manual) to reserve slip b uff er memory .
Advanced Operations 80 E Chec k trac king systems Check trac king system W ith the check tracking system, the amount, check number , number of slip print lines, store number , date/time and registration detail data are stored in two files (check tracking index file and check tracking detail file).
Adv anced Operations TE-4000F/4500F User ’ s Manual 81 E Opening a chec k Example OPERA TION RECEIPT 1234 B 33 B 10- ! ! 20- " " 30- # Insert slip S Remove slip Press <NEW B ALANCE> to temporarily close the transaction.
Advanced Operations 82 E Issuing a guest receipt The following operation can be used to print out the balance of a temporarily finalized check. Example OPERA TION RECEIPT 1234 B Closing a chec k memory Example OPERA TION RECEIPT 1234 B 150- F GUEST RECEIPT Input the number of check you want.
Adv anced Operations TE-4000F/4500F User ’ s Manual 83 E SLIP New/old c heck ke y operation Example 1 When a check number is input and <NEW/OLD> is pressed, the key works as a new check key function if there is no matching check number in the check tracking memory .
Advanced Operations 84 E Add chec k This operation lets you combine the amounts of more than one check into a single check. Example Registration for c heck number 1234 OPERA TION RECEIPT 1234 B 33 B 1.
Adv anced Operations TE-4000F/4500F User ’ s Manual 85 E Separate chec k This operation makes it possible to split a single check into separate checks. Example Original check Check# 1234 ————————— ———— Dept 1 $10.00 Item 1 ————————— Quantity 1 ————————— ———— Dept 2 $20.
Advanced Operations 86 E Clerk transfer This operation lets you change the clerk who is in charge of a specif ic open check number . Example T o c hange the clerk f or check number 1234 from cler k 1 to clerk number 4. OPERA TION RECEIPT o 1 B 4 B 1234 B B T able transfer W ith this operation, you can change the number of a check.
Adv anced Operations TE-4000F/4500F User ’ s Manual 87 E Price reductions (red price) Y ou can use the reduced price function to change a price; generally to an amount that is less than the normal price.
Advanced Operations 88 E Condiment/preparation PLUs Y ou can force entering condiment or preparation PLU after the main PLU registration by programming. Example (condiment PLU) OPERA TION RECEIPT 1 + 11 + 12 + 13 + F Example (preparation PLU) OPERA TION RECEIPT 20 + 21 + 22 + 23 + F Registering main PLU.
Adv anced Operations TE-4000F/4500F User ’ s Manual 89 E Deposit registrations Use the following procedures to register deposits. Deposit fr om customer OPERA TION RECEIPT 50- B F Deposit fr om customer during sales transaction OPERA TION RECEIPT 10- ! 20- " 20- B F DEPOSIT – DEPOSIT + Deposit Cash $50.
Advanced Operations 90 E Bill cop y Example 1 T o issue a copy of a bill dated February 1, 2004 in the amount of $35.00 cash. OPERA TION RECEIPT 02012004 B 35- F Note that you can f inalize this operation using the cash amount tendered ke y . Example 2 T o issue a copy of a bill dated February 1, 2004 in the amount of Euro 30.
Adv anced Operations TE-4000F/4500F User ’ s Manual 91 E Actual stoc k quantity inquiry W ith this operation, you can recall the actual stock quantity for PLUs and sho w it on the display of the cash register . Example T o chec k the actual stock quantity of PLU 32 and flat-PLU 001.
Advanced Operations 92 E Pre vious item v oid using <REVIEW> Y ou can correct the previously re gistered item(s) in the same transaction by using <REVIEW> (re vie w ke y). Example OPERA TION DISPLA Y 1 ST •2.35 DEPT01 235 ! "35 2 ST •4.
Adv anced Operations TE-4000F/4500F User ’ s Manual 93 E Scanning PLU Product barcodes are read by scanning with hand-held scanner , and are f iled in the scanning PLU f ile together with the unit price, item descriptor , programming status, link department, totalizer and counter .
Advanced Operations 94 E Pr ogramming to c lerk Y ou can program up to 4-digit assigning number (clerk number), trainee status of clerk (i.e. training cashier) and commission rate for each clerk. Pr ogramming clerk n umber 6 3 s 6 { } 07 s 6 : : : : a 6 s Clerk number To other clerk Rec.
Adv anced Operations TE-4000F/4500F User ’ s Manual 95 E 6 2 s 6 : : : : s 6 Characters 6 a 6 s Address code ☞ See “ Entering characters ” section.
Advanced Operations 96 E Address Contents Initial character Y ours code 0132 1st line of logo message YOUR RECEIPT 0232 2nd line of logo message THANK YOU 0332 3rd line of logo message CALL AGAIN 0432.
Adv anced Operations TE-4000F/4500F User ’ s Manual 97 E 6 2 s 6 Characters 6 6 s ☞ See “ Entering characters ” section. To another department/transaction key Mode switch PGM Department key Tr.
Advanced Operations 98 E 6 2 s 6 Characters 6 B 6 flat-PLU key 6 s ☞ See “ Entering characters ” section. Use B to program to 2nd ~ 6th flat-PLU key.
Adv anced Operations TE-4000F/4500F User ’ s Manual 99 E 1 Shift key Press this key to shift the following characters from the uppercase letter to lowercase letter and returns to the uppercase letter in sequence. 2 Left cursor key Press this key to shift the character setting position to the left one by one.
Advanced Operations 100 E 0@ P ' p !1 A Q a q "2 B R br #3 C S c s $4 D Td t %5 E U e u &6 F V f v '7 G W g w (8 H X h x )9 I Yi y *: J Z jz +; K [k { ,< L l | -= M ] m } .
Adv anced Operations TE-4000F/4500F User ’ s Manual 101 E Editing character s Correcting a character just entered OPERA TION DISPLA Y (dot) “ L ” “ E ” “ N ” “ O ” “ N ” 1 Enter LENON, instead of LEMON. yyy 1 Press left arrow key three times.
Advanced Operations 102 E 8 8 s After you finish to select items, press s to terminate. Mode switch X1 • Specifying a department ! , " , # ~ • Specifying a PLU 1 + ~ • Specifying a flat-PLU.
Adv anced Operations TE-4000F/4500F User ’ s Manual 103 E T o print the financial read report This report shows gr oss sales, net sales, cash in drawer and check in dra wer .
Advanced Operations 104 E 8 8 F Mode switch X1/Z1 (read/reset) Money declaration *1 • Main currency: (Cash in drawer amount b , N or n ) • Sub currency: ( P cash in drawer amount b , N or n ) T o print the dail y sales read/reset report This report shows sales except for PLUs.
Adv anced Operations TE-4000F/4500F User ’ s Manual 105 E *1 Money declaration: Count how much cash is in the drawer and input this amount (up to 10 digits). The cash register will automatically compare the input with the cash in drawer in the memory and print the dif ference between these two amounts.
Advanced Operations 106 E 8 019 F Mode switch X1/Z1 (read/reset) T o print the PLU/flat-PLU read/reset report This report shows sales for PLUs. OPERA TION REPORT 8 014 F Mode switch X1/Z1 (read/reset) T o print the hourl y sales read/reset repor t This report shows hourly breakdowns of sales.
Adv anced Operations TE-4000F/4500F User ’ s Manual 107 E T o print the monthl y sales read/reset report This report shows monthly breakdowns of sales. OPERA TION REPORT 8 020 F Mode switch X1/Z1 (read/reset) 8 016 F Mode switch X1/Z1 (read/reset) T o print the gr oup read/reset report This report shows PLU/subdepartment/department group totals.
Advanced Operations 108 E • P eriodic sales read report ( “ X2 ” mode) Y ou can print read reports at any time during the business day without af fecting the data stored in the cash register's memory . • P eriodic sales reset report ( “ Z2 ” mode) Y ou should print reset reports at the end of the business day .
Adv anced Operations TE-4000F/4500F User ’ s Manual 109 E *1 Zero totalled departments/functions (the amount and item numbers are both zero) are not printed. *2 These items can be skipped by programming. ZZ1 DEPT 0001 0001115 DEPT01 38 8.13% •257.
Advanced Operations 110 E T o print other sales read/reset reports The following reports can be issued. Procedure 6 Money declaration 6 : : ~ : : a Mode switch X1/Z1 X2/Z2 (read/reset) Command code (i.
Adv anced Operations TE-4000F/4500F User ’ s Manual 111 E 8 1 s 8 s Mode switch PGM Reading the cash register's pr ogram T o print unit price/rate pr ogram (e xcept PLU/scanning PLU) OPERA TION REPORT P 01......................... CHECK @1.00 CASH @100.
Advanced Operations 112 E 8 2 s 8 s Mode switch PGM T o print key descriptor , name, message pr ogram (except PLU) OPERA TION REPORT P 02..............
Adv anced Operations TE-4000F/4500F User ’ s Manual 113 E T o print the PLU/flat-PLU pr ogram OPERA TION REPORT 8 6 s 8 104 s 304 s 8 : : : : : : 8 F 8 : : : : : : 8 F 8 F PLU start No. PLU end No. If skipped, starts from PLU1. If skipped, ends the last PLU.
114 E This section describes what to do when you ha ve problems with operation. When an err or occur s Errors are indicated by an error codes. When this happens, you can usually f ind out what the problem is as illustrated belo w . Press C and check the appropriate section of this manual for the operation you want to perform.
TE-4000F/4500F User's Manual 115 E T roubleshooting T roubleshooting Error code Message Meaning Action E046 E047 E048 E049 E050 E051 E053 E054 E055 E059 E060 E061 E062 E063 E064 E066 E075 E085 E0.
116 E When the register does not operate at all Perform the follo wing check whenev er the cash re gister enter an error condition as soon as you switch it on. The results of this check are required by service personnel, so be sure to perform this check before you contact a CASIO representati ve for servicing.
TE-4000F/4500F User's Manual 117 E Clearing a machine loc k up If you make a mistake in operation, the cash re gister may lock up to a void damage to prog rams and preset data. Should it happens, you can use the following pr ocedure to clear the lock up without losing any data.
118 E User Maintenance and Options Step 2 Remov e the printer cov er . (If the cover is locked, unlock by using the printer cover key before this step.) Step 3 Press j to feed about 20 cm of paper . Step 4 Cut the journal paper at the point where nothing is printed.
TE-4000F/4500F User's Manual 119 E User Maintenance and Options User Maintenance and Options Step 1 T urn the mode switch to REG1 position. Step 2 Remove the pr inter cover . (If the cover is locked, unlock by using the printer cover key before this step.
120 E * Specifications and design are subject to change without notice. Specifications Input method Entry: 10-key system, buf fer memory 8 ke ys (2-key roll o ver) Department: Full key system Display Main: Amount 10 digits (zero suppression); No.
TE-4000F/4500F User's Manual 121 E Index Specifications Index A add check 26, 84 adding to a check 81 addition (+) 58 alphabet key 99 arrangement 26, 65 assigning a clerk 32 B backlight color con.
122 E Index K K etten Bon 26 ke yboard 16, 17 ke yboard (TE-4000F) 22 ke yboard (TE-4500F) 24 L loan 22, 24, 50 locking platen 13, 14 logo message 30, 95 M machine No.
TE-4000F/4500F User's Manual 123 E Index Index S scale 27 scanning PLU 93 second unit price 62 separate check 27, 85 set menu 65 shift key 99 sign off 32 sign on 32 single item 34, 39, 57 slip 79.
CASIO COMPUTER CO ., L TD . 6-2, Hon-machi 1-chome Shibuya-ku, T okyo 151-8543, Japan TE-4000*E MO0305-A Printed in Malaysia Printed on recycled paper .
Ein wichtiger Punkt beim Kauf des Geräts Casio TE-4500F (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Casio TE-4500F noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Casio TE-4500F - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Casio TE-4500F reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Casio TE-4500F erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Casio TE-4500F besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Casio TE-4500F verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Casio TE-4500F. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Casio TE-4500F gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
