Benutzeranleitung / Produktwartung QT-6000 des Produzenten Casio
Zur Seite of 104
T ouch Screen Smart T erminal QT -6000 User’ s Man ual Intr oduction Ta b le of Contents Intr oducing QT -6000 Displa y/Ke yboard Basic Operations & Setups Registrations Pr ograms Ad v anced Operations Useful Features Reports T r oub leshooting Error Code T able Inde x Eu Di U .
2 E.
Introduction & Contents QT -6000 User's Man ual 3 E Casio Europe GmbH Bornbarch 10, 22848 Norderstedt Germany WARNING: T his is a Class A product. In a domestic en vironment this product may cause radio interference in which case the user may be required to take adequate measures.
4 E Safety Precautions • To use this product safely and correctly , read this manual thoroughly and operate as instructed. After reading this guide, keep it close at hand for easy reference. Please keep all informations for future refer ence. • Always observ e the warnings and cautions indicated on the product.
Introduction & Contents QT -6000 User's Man ual 5 E W arning! Never try to take the terminal apart or modify it in any wa y . High-v oltage components inside the terminal create the danger of fire and electric shock. • Contact CASIO service representative for all repair and maintenance.
6 E Intr oduction & Contents Introduction & Contents ...................................................................................... 6 Introducing QT -6000 ................................................................................
Introduction & Contents QT -6000 User's Man ual 7 E Nor mal refund transaction ...................................................................................................... ......... 37 Reduction of amounts paid on refund ...........
8 E Intr oduction & Contents Actual stoc k quantity inquir y .................................................................................................. 60 Single item cash sales .............................................................
Introduction & Contents QT -6000 User's Man ual 9 E To print the daily sales read/reset repor t ..................................................................................... .... 85 To print the per iodic 1/2 sales read/reset repor ts .
10 E General guide This part of the manual introduces you to the terminal and provides a general explanation of its various parts. Intr oducing QT -6000 T ouch screen panel Displa y on/off ke y Pilot .
Introducing QT -6000 QT -6000 User’ s Manual 11 E Tilt the touch screen panel Card slot cover Rear view Panel fixing screws 1. Loosen the panel fixing screws. (T urn the scre w more than one round.) 2. T ilt the touch screen panel. 3. T ighten the panel fixing screws.
Intr oducing QT -6000 12 E When the cash dra wer does not open! (for medium size dra wer only) In case of power failure or the machine is in malfunction, the cash drawer does not open automatically . Even in these cases, you can open the cash dra wer by pulling drawer release lever (see below).
Introducing QT -6000 QT -6000 User’ s Manual 13 E PLU010 PLU020 PLU030 PLU040 PLU050 PLU009 PLU019 PLU029 PLU039 PLU049 PLU008 PLU018 PLU028 PLU038 PLU048 PLU007 PLU017 PLU027 PLU037 PLU047 PLU006 P.
Intr oducing QT -6000 14 E Main displa y par t Menu le vel displa y par t REG C 01 31-10-04 12:34 PM 001234 1 Spagetti •20.00 T1 ¨ 1 Spagetti •20.00 T1 7.5% %- -1.75 T1 1 Coffee •8.00 1 Hamburger •2.00 T1 15% %- -0.30 T1 1 Milk •2.00 2 Apple Juice •5.
Introducing QT -6000 QT -6000 User’ s Manual 15 E 1 Registered item quantity This part of the display shows item count of each item. 2 Item/key descriptor When you register a department/PLU/scanning PLU or transaction key , the item descriptor or k ey de- scriptor appears here.
Intr oducing QT -6000 16 E Ke yboar d part • Register Mode 1 ESC/SKIP key Use this key to terminate a program sequence, X/Z sequence, and return the primary status. This ke y is also used to terminate a report being issued in PGM, X, and Z mode. 2 Clerk key Ç , É ~ ± Use this ke y to sign clerk on and off the terminal.
Introducing QT -6000 QT -6000 User’ s Manual 17 E A Cash/Amount tendered key a Use this key to re gister a cash tender . B Y es key ` Use this key to consent the selection and proceeding steps. C Function list key ´ Use this key to show the programmed function key list.
Intr oducing QT -6000 18 E Ke yboar d part with pop-up window List pop-up window PLU010 PLU020 PLU030 PLU040 PLU050 PLU009 PLU019 PLU029 PLU039 PLU049 PLU008 PLU018 PLU028 PLU038 PLU048 PLU007 PLU017 .
Introducing QT -6000 QT -6000 User’ s Manual 19 E Allocatable functions You can tailor a keyboard to suit your particular type of business. Consult your CASIO dealer for detail information. Add check Use this key in a check tracking system to combine the details of more than one check into a single check.
Intr oducing QT -6000 20 E List Use this key to display menu lists. List number Use this key to enter list number. Loan Use this key to input the amount of money provided making change. Location change Use this key to select the window which shows the table layout of each floor/part of the restaurant.
Introducing QT -6000 QT -6000 User’ s Manual 21 E Shift PLU Use this key to shift flat-PLU key to the n-th (1 ~ 8) level. Slip feed/release Use this key to feed slips inserted into the slip printer. This is done by specifying the number of feed lines.
22 E • Check to make sure that the terminal is plugged in securely . • Check to make sure there is enough paper left on the roll of the remote printer . • Read the financial totals to confirm that they are all zero. Page 83 • Check the date and time.
Basic Operations and Setups QT -6000 User’ s Manual 23 E Clerk sign on/off and mode c hange Assigning a clerk In Germany , you can assign clerks by attaching an i-Button ke y to the receiv er or by clerk number . In other areas, you can assign clerks by using clerk key or by clerk secret number .
Basic Operations and Setups 24 E Mode change Even the mode switch is not allocated on the terminal, you can change the mode of the terminal by pressing the ° key . Mode pop-up window When you press the ° ke y, the mode pop-up window is appeared. In the mode pop-up windo w , only the allow able mode icons of the signed on clerk is appeared.
Basic Operations and Setups QT -6000 User’ s Manual 25 E Displaying the time and date Y ou can show the time or date on the display of the terminal whene v er there is no registration being made. To displa y and clear the date/time OPERA TION DISPLA Y | Mode REG Date/time appears on the display .
Basic Operations and Setups 26 E Preparing and using flat-PLU ke ys Registering flat-PLU keys The following e xamples sho w ho w you can use the flat-PLU keys in v arious types of registrations.
Basic Operations and Setups QT -6000 User’ s Manual 27 E Multiplication PRINT OUT OPERA TION (by optional remote printer) 12 | 1- ( s 20- F Unit price $1.00 ———————— —— Item Quantity 12 ———————— —— Flat-PLU 1 ————————————— Payment Cash $20.
Basic Operations and Setups 28 E Flat-PLU department link/tax status/listing capacity programming pr ocedure Step 1. Press ° and <PGM3> icon to turn “PGM-3”. Step 2. Select “3.Key Feature” and press ` , then select “1.PLU” and press ` .
Basic Operations and Setups QT -6000 User’ s Manual 29 E Registering flat-PLU ke ys by pr ogramming data Preset price PRINT OUT OPERA TION (by optional remote printer) ) F Preset tax status PRINT OUT OPERA TION (by optional remote printer) 5 | * , s 20- F * Before this registration, tax table programming is necessary .
Basic Operations and Setups 30 E Preparing and using discounts/reductions This section describes how to pr epare and register discounts/reductions. Pr ogramming discount rate and reduction amount Step 1. Press ° and <PGM1> icon to turn “PGM-1” and press ` .
Basic Operations and Setups QT -6000 User’ s Manual 31 E Applies the preset discount rate to the last item registered. The input value takes priority of the preset value. Registering discounts The follo wing example sho ws ho w you can use the p ke y in various types of registration.
Basic Operations and Setups 32 E Reduces the subtotal by the value input here. Registering reductions The following examples show how you can use the m key in various types of registration.
Basic Operations and Setups QT -6000 User’ s Manual 33 E Registering credit and c hec k pa yments The following examples show how to register credits and payments by check.
Basic Operations and Setups 34 E Registering both the Eur o and local currenc y The following example shows the basic operation using the currency exchange function between the Euro and the local currency .
Basic Operations and Setups QT -6000 User’ s Manual 35 E Case B OPERATION DISPLAY 12- ( ´P 6- a PRINTOUT (by optional remote printer) 1 Press the P key , which con verts the subtotal amount into the sub currency by applying the preset exchange rate.
Basic Operations and Setups 36 E Registering returned goods in the REG mode The following example shows how to use the R key in the REG mode to register goods returned by customers.
Basic Operations and Setups QT -6000 User’ s Manual 37 E Reduction of amounts paid on refund PRINT OUT OPERA TION (by optional remote printer) 4- * 15 m ) p s F Important! • To avoid miss registrations in the REF mode, return the mode to the former position immediately.
Basic Operations and Setups 38 E Registering mone y received on account T he follo wing example sho ws ho w to register money recei v ed on account. This registration must be performed out of a sale. PRINT OUT OPERA TION (by optional remote printer) ´ 7-- r Amount can be up to 8 digits.
Basic Operations and Setups QT -6000 User’ s Manual 39 E Making corrections in a registration There are four techniques you can use to make corrections in a registration. •T o correct an item that you input but not yet re gistered. •T o correct the last item you input and re gistered.
Basic Operations and Setups 40 E To correct an item you input and registered PRINT OUT OPERA TION (b y optional remote printer) 1- ( 2- ) ) ~ 8 | 4- , ~ 6 | 4- , s 50 p ~ s 5 p R 2- ) ~ R 220 ) s 20- .
Basic Operations and Setups QT -6000 User’ s Manual 41 E Mode REG To correct the item y ou registered previousl y in this receipt PRINT OUT OPERA TION (by optional remote printer) 8 | 1- ( 2- ) 3- *.
Basic Operations and Setups 42 E Printing the dail y sales reset repor t This report shows daily sales totals. Pr ocedure Step 1. Press ° and <X/Z > icon to turn “X/Z Report”. Step 2. Select “4.Daily Z” and press ` . Step 1. screen Step 2.
Basic Operations and Setups QT -6000 User’ s Manual 43 E MC #01 Z C 01 31-10-2004 05:15 PM 000237 Z 0001011 FIXED TTL 1 GROSS 981.250 •6,574.40 NET No 111 •7,057.14 CAID •1,919.04 CKID •859.85 CRID •709.85 RF No 3 •10.22 DC •1.22 REF •2.
44 E Advanced Operations This chapter describes more sophisticated operations that you can use to suit the needs of your retail en vironment. P ost-finalization receipt The post-finalization receipt lets you issue a receipt after finalization of the transaction.
Ad vanced Operations QT -6000 User’ s Manual 45 E Inputting the n umber of customer s Example 1 PRINT OUT OPERA TION (by optional remote printer) 2 [ 15- ( 5- ) s 20- F Example 2 Y ou can only use the following opera tion to re-input the number of customers when [ (customer number ke y) is preset to allo w re-input.
Advanced Operations 46 E Clerk interrupt function There are two types of clerk interrupt function, illustrated by Procedure 1 and Procedure 2 below . • In Procedure 1, each clerk possesses a unique .
Ad vanced Operations QT -6000 User’ s Manual 47 E Printing slip To perform batch printing on the slip printer, you must f irst connect the slip printer (SP-1300: option) and use the memory allocation operation (see program 5 mode in the programming manual) to reserve registration bu ff er memory .
Advanced Operations 48 E Chec k trac king systems Check trac king system W ith the check tracking system, the amount, check number , number of slip print lines, machine number , date/ time and registration detail data are stored in two files (check tracking index file and check tracking detail file).
Ad vanced Operations QT -6000 User’ s Manual 49 E Opening a chec k Example PRINT OUT OPERA TION (by optional remote printer) 1234 B 33 B 10- ( ( 20- ) ) 30- * Insert slip S Remo ve slip Press <NEW B ALANCE> to temporarily f inalize the transaction.
Advanced Operations 50 E Issuing a guest receipt The following operation can be used to print out the balance of a temporarily finalized check. Example PRINT OUT OPERA TION (by optional remote printer.
Ad vanced Operations QT -6000 User’ s Manual 51 E PRINT OUT (by optional slip printer) New/old c hec k key operation When the <NEW/OLD> is pressed, check number pop-up window is opened. If the check number you want to use exists in the windo w , just press the icon and continue the re gistration.
Advanced Operations 52 E Add chec k This operation lets you combine the amounts of more than one check into a single check. Example Registration f or check n umber 1234 PRINT OUT OPERA TION (by option.
Ad vanced Operations QT -6000 User’ s Manual 53 E MC #01 REG C 01 31-10-2004 02:15 PM 001065 CHECK No. 3456 1 PLU001 •10.00 1 PLU003 •30.00 ST •40.00 CASH •40.00 CG •0.00 Original check Check# 1234 ————————— ———— Flat 1 $10.
Advanced Operations 54 E Clerk transfer This operation lets you change the clerk who is in charge of a specif ic open check number . Example To chang e the clerk for check number 1234 from clerk 1 to clerk 4.
Ad vanced Operations QT -6000 User’ s Manual 55 E Condiment/preparation PLUs Y ou can force entering condiment or preparation PLU after the main PLU registration by programming.
Advanced Operations 56 E Deposit registrations Use the following procedures to register deposits. Deposit from customer PRINT OUT OPERA TION (by optional remote printer) 50- B F Deposit from customer .
Ad vanced Operations QT -6000 User’ s Manual 57 E Bill cop y Example To issue a copy of a bill dated September 30, 2004 in the amount of $35.00 cash. PRINT OUT OPERA TION (by optional remote printer) 300904 B 35- F Note that you can f inalize this operation using the cash amount tendered key .
Advanced Operations 58 E Tr ay total Multiple item totalling function T his function accumulates all items registered from the f irst item re gistered up to point that <TRA Y TO T AL> is pressed two times, or all items between two presses of <TRA Y TO T AL> .
Ad vanced Operations QT -6000 User’ s Manual 59 E Tips Example PRINT OUT OPERA TION (by optional remote printer) 3- ( 5- ) s 80 B 10- F MC #01 REG C 01 31-10-2004 03:30 PM 001088 1 PLU001 •3.00 1 PLU002 •5.00 TIP •0.80 TL •8.80 CASH •10.00 CG •1.
Advanced Operations 60 E Stoc k c hec k Each PLU has an actual stock totalizer that you can program with a minimum stock quantity . The terminal checks actual stock quantities against the programmed minimum stock quantities. Stock operations are performed only for PLUs programmed with minimum stock quantities.
Ad vanced Operations QT -6000 User’ s Manual 61 E The transaction is immedi- ately finalized. Single item cash sales A department ke y , subdepartment or PLU programmed with single item sale status finalizes the transaction as soon as it is registered.
Advanced Operations 62 E Addition Addition (plus) Example PRINT OUT OPERA TION (by optional remote printer) 1- ( 10 B 3 | 2- ( 3 | B F Premium (%+) Example PRINT OUT OPERA TION (by optional remote printer) 1- ( 10 U 3 | 2- ( s U F + + MC #01 REG C 01 31-10-2004 03:50 PM 001100 1 PLU001 •1.
Ad vanced Operations QT -6000 User’ s Manual 63 E Coupon transactions Note that error occurs when the result of the coupon (not coupon 2) registration is negative, if the terminal is programmed to prohibit credit balances.
Advanced Operations 64 E Registering the second unit price Second unit prices along with quantity modifiers can be programmed to PLUs. Pressing <1st@> (1st unit price ke y)/<2nd@> (2nd unit price ke y) calls up the first/second unit price, quantity modif ier, and descriptor .
Ad vanced Operations QT -6000 User’ s Manual 65 E Example 3 The procedure shown on the previous page applies when the terminal is programmed not to maintain the 1st/ 2nd price shift. When the terminal is programmed to maintain the 1st/2nd price shift, the procedure belo w applies.
Advanced Operations 66 E Preset tender amount An amount up to six digits long can be programmed to <CASH> (cash/amount tendered ke y). Then, when <CASH> is pressed without inputting a value, the programmed value is automatically registered and the transaction is finalized.
Ad vanced Operations QT -6000 User’ s Manual 67 E Arrangement key registrations Ke y (job/command) operations can be assigned to an <ARRANGE> (arrangement key). Then, simply pressing <ARRANGE> performs all of the key functions assigned to it.
Advanced Operations 68 E Currency e xc hange function When <CE> (currency exchange key) and <ST> are pressed, a current subtotal including tax is converted into foreign currency and the result is displayed. Before using the currency exchange function, it is necessary to program the conversion rate and foreign currency amount symbol.
Ad vanced Operations QT -6000 User’ s Manual 69 E Pa r tial tender in a foreign currenc y * Pre-programmed exchange rate: ¥ 100 = $0.9524 Important! Tender in a foreign currency can be registered using a and k only. Other finalization keys cannot be used, but the remaining tender in local currency can be finalized using any finalize key.
Advanced Operations 70 E T emporarily releasing compulsion <OPEN> (open key) can release HDL (High Digit Limitation)/LDL (Low Digit Limitation) and can be programmed to release HAL (High Amount Limit). <OPEN 2> (open 2 key) can be programmed to release specific compulsion.
Ad vanced Operations QT -6000 User’ s Manual 71 E VA T breakdo wn printing Y ou can force printing of the V A T breakdown at the f inalize stage, regardless of whether the terminal is programmed to print or skip printing of the V A T breakdown. Every time you w ant to hav e V A T breakdown, press <V A T>.
Advanced Operations 72 E Registering loan amounts Use this procedure to register loan or bank recei v ed from the off ice. PRINT OUT OPERA TION (by optional remote printer) 10 | 1- l 5 | 5- l F Registering pic k up amounts Use this procedure to register pic k up money from cash drawer .
Ad vanced Operations QT -6000 User’ s Manual 73 E Unit price inquiry Use this operation to recall the unit prices of departments, subdepartments, PLUs, second unit price of PLUs, or scanning PLUs. The unit prices appear on the display of the terminal when recalled.
Advanced Operations 74 E Pr ogramming to c lerk Y ou can program up to 4-digit clerk number (secret number), trainee status of clerk (i.e. training cashier) and clerk name (up to 16 characters) etc. for each clerk. Pr ogramming procedure Step 1. Press ° and <PGM3> icon to turn “PGM-3”, select “2.
Adv anced Operations QT -6000 User’ s Manual 75 E Pr ogramming descriptor s and messa g es Pr ogramming item descriptor (flat-PLU) procedure Step 1. Press ° and <PGM2> icon to turn “PGM-2”, select “1.Item Descriptor” and press ` . Step 2.
Advanced Operations 76 E Pr ogramming function key c haracter pr ocedure Step 1. Press ° and <PGM2> icon to turn “PGM-2”, select “1.Item Descriptor” and press ` . Step 2. Select “7.Char & Press key” and press ` . Step 1. screen Step 2.
Adv anced Operations QT -6000 User’ s Manual 77 E Pr ogramming receipt/slip message procedure Step 1. Press ° and <PGM2> icon to turn “PGM-2”, select “2.Char & Message” and press ` . Step 2. Select “1.Receipt/SLIP Msg” and press ` .
Advanced Operations 78 E PAGE DOWN PAGE UP HOME Shift PLU1 Menu1 2nd@ ! @#$% ^ & * ( ) _ + q wert y u i o p { } a sdfg h j k l : " ~ z xcvb n m < > ? ESC/ SKIP INS SPACE SHIFT DEL BS DO.
Adv anced Operations QT -6000 User’ s Manual 79 E SHIFT3-case SHIFT4-case PAGE DOWN PAGE UP HOME Shift PLU1 Menu1 2nd@ â ôûîê ç ø á óúíé å ã à òùìè æ ¬ ä öüïë ñ õ ¢ ¤ .
Advanced Operations 80 E Editing character s Correcting a character just entered OPERA TION DISPLA Y “L” “E” “N” “O” “N” 1 Enter LENON, instead of LEMON. yyy 1 Press left arrow key three times. “M” 1 Enter “M”. Correcting and adding/deleting an item descriptor alread y set OPERA TION DISPLA Y Designate the item.
Adv anced Operations QT -6000 User’ s Manual 81 E Printing read/reset repor ts • Read (X) report Y ou can display or print read reports at any time during the b usiness day without affecting the data stored in the terminal. • Reset (Z) report After issuing a reset report, the totals stored in the terminal are reset.
Advanced Operations 82 E To print the individual key (department, subdepartment, PLU/flat-PLU , function) read repor t T his report sho ws sales for specific k eys. Procedure Step 1. Press ° and <X/Z> icon to turn “X/Z Report”. Step 2. Select “1.
Adv anced Operations QT -6000 User’ s Manual 83 E To print the financial read repor t This report shows net sales, cash, char ge, check and credit in drawer . Procedure Step 1. Press ° and <X/Z> icon to turn “X/Z Report”. Step 2. Select “1.
Advanced Operations 84 E X 0020017 CASHIER/CLERK # •6,919.04 •0.00 C 01 •••••••••••••1 GROSS 1485 •7,543.48 NET No 120 •7,263.
Adv anced Operations QT -6000 User’ s Manual 85 E To print the daily sales read/reset report Please refer to “Printing the daily sales reset report” section on page 42 of this manual. To print the periodic 1/2 sales read/reset reports These reports show breakdowns of sales by any two kinds of period you want.
Advanced Operations 86 E To print the PLU read/reset repor t T his report sho ws sales for PLUs. Procedure Step 1. Press ° and <X/Z> icon to turn “X/Z Report”. Step 2. Select “1.Daily X”, “2.Periodic(1) X”, “3.Periodic(2) X”, “4.
Adv anced Operations QT -6000 User’ s Manual 87 E X 0000019 HOURLY 00:00->01:00 1 •1.20 1.90% CT 1 •1.20 01:00->02:00 12 •12.00 19.00% 23:00->00:00 1 •3.59 3.90% CT 1 •3.59 — Read symbol/Report code/Report title —T ime range/no.
Advanced Operations 88 E To print the monthly sales read/reset report This report shows monthly breakdowns of sales. Procedure Step 1. Press ° and <X/Z> icon to turn “X/Z Report”. Step 2. Select “1.Daily X”, “2.Periodic(1) X”, “3.
Adv anced Operations QT -6000 User’ s Manual 89 E Reading the terminal's pr ogram The tree of P6 (pr ogram read) men u windo w Y ou can issue these kinds of report by tracing this tree.
Advanced Operations 90 E Pr ocedure Step 1. Press ° and <PGM-6> icon to turn Program 6 mode and press ` . Step 2. Select an appropriate job and press ` . Step 1. screen Step 2. screen Step 3. Select an appropriate job and press ` . If the job requires range destination, Step 4 screen will appear .
Adv anced Operations QT -6000 User’ s Manual 91 E Subdepartment unit price SUBDEPT01 0001-003 — Subdepartment descriptor/Record No./File No. @1.00 — Unit Price SUBDEPT02 0002-003 @2.00 SUBDEPT03 0003-003 @3.34 Department unit price DEPT01 0001-005 — Department descriptor/Record No.
Advanced Operations 92 E Character and Message Receipt/Slip message 0001-032 — Record No./File No. YOUR RECEIPT — Receipt message 0002-032 THANK YOU 0003-032 Clerk Clerk feature C 01 001-007 — Clerk name/Record No./File No. 0001 — Clerk secret code 00 — Drawer No.
Adv anced Operations QT -6000 User’ s Manual 93 E Subdepartment feature SUBDEPT01 0001-003 — Subdepartment descriptor/Record No./File No. 000000000000 — Elementary program 11-066 000000 — 15-066 @0.
94 E This section describes what to do when you ha ve problems with operation. When an err or occur s Errors are indicated by an error codes. When this happens, you can usually f ind out what the problem is as illustrated belo w . Press C and check the appropriate section of this manual for the operation you want to perform.
QT -6000 User's Manual 95 E Tr oubleshooting Prompt message Meaning Action ********** E061 Printer error. YES:Retry to print. NO :Backup to R/J printer. ESC:Discard data. ********** E062 Printer paper end. ********** E062 Printer paper end. YES:Retry to print.
96 E Tr oubleshooting Prompt message Meaning Action E134 Middle of Clerk Transfer Press ESC Key. E136 Middle of Separate Check Press ESC key. E139 Not allowed to be negative by Minus/Coupon key. E140 Wrong menu. E141 Press <TRAY TTL> twice before finalization.
QT -6000 User's Manual 97 E When the terminal does not operate at all Perform the following check whene ver the term inal enter an er ror condition as soon as you switch it on. The results of this check are required by service personnel, so be sure to perform this check before you contact a CASIO representative for servicing.
98 E In case of po wer failure If the power supply to the terminal is cut by a power failure or any other reason, simply wait for power to be r estored. The details of an y on-going transaction as well as all sales data in memory are protected by the memory backup batteries.
QT -6000 User's Manual 99 E * Specifications and design are subject to change without notice. Specifications Tr oubleshooting, Options and Specifications Input method Entry: 10-key system Function: Full key system Display Main: Color LCD: 12.1 inch 800 × 600 dots with touch screen Listing capacity Amount: 9999999 Quantity: 9999.
100 E Index A AC adaptor 10 accessories 10 add check 19, 52 add-on new number type 18 adding to check 49 alphabet ke y 78 arrangement 19, 67 arro w key 16 assigning a clerk 23 auto new balance functio.
QT -6000 User's Manual 101 E Index Index item descriptor 15 item quantity 15 item search 19 K K etten Bon 20 key descriptor 15 keyboard 16 L list 20 list number 20, 56 list pop-up window 18 loan .
102 E Index single item sale 26 slip 47 slip back feed/release ke y 21, 47 slip feed/release 21, 47 slip print 21 slip printer 98 space key 78 square ke y 21 stock (neg ative) 60 stock (under minimum .
QT -6000 User's Manual 103 E.
CASIO COMPUTER CO ., L TD . 6-2, Hon-machi 1-chome Shibuya-ku, T okyo 151-8543, Japan QT -6000*E MO0407-A Printed in Malaysia Printed on recycled paper.
Ein wichtiger Punkt beim Kauf des Geräts Casio QT-6000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Casio QT-6000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Casio QT-6000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Casio QT-6000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Casio QT-6000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Casio QT-6000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Casio QT-6000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Casio QT-6000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Casio QT-6000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
