Benutzeranleitung / Produktwartung EX Z 280 des Produzenten Casio
Zur Seite of 194
1 E To go to “Getting the Most Ou t of Dyn amic Photo” cl ick here! Thank you for purchasing this CASIO product. • Before using it, be sure to re ad the pr ecautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference.
2 As you unpack your camera, check to make sur e that all items shown below are included. If anything is missing, contact your original retailer. Unpacking Digital c amera Rechargeable lithium ion bat.
3 • The contents of this manual and the bundled Basic Reference are subject to change without notice. • The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything th at is questionable, erroneous, etc.
4 Contents Contents Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 General Guide .
5 Contents ❚❙ Recording Movie Images and Audio 48 T o record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Using Prerecord Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Contents ❚ Controlling I mage Sharp ness . . . . . . . . . . . . . . . . . . . . . . . . . . (Sh arpness) . . . 84 ❚ Controlling Colo r Saturation . . . . . . . . . . . . . . . . . . . . . . . . . . . ( Saturation) . . . 85 ❚ Adjusting Imag e Contrast .
7 Contents ❚❙ Printing 1 15 Printing Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 15 Connecting Directly to a PictBridge Compatible Printer . . . . . . . . . . . . . . . 1 16 Using DPOF to S pecify Images to be Printed and the Number of Copies .
8 Contents ❚❙ Configuring Monitor Screen Settings 150 Using the On-screen Histogram to Check Exposure . . . . . . . . . . . . . . . . . . 150 ❚ How to Use th e Histogra m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 The numbers in parentheses indicate t he pages w here each item is explained. . Camera . Charger Unit General Guide 1 Zoom controller (pages 22, 45, 90, 91) 2 Shutter button (page 22) 3 [ON/OFF] (Po.
10 The monitor screen uses various indicators , icons, and values to keep you informed of the camera’s status. • The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes.
11 . Movie Recording easy Mode Panel : On Panel : Off 1 Focus mode (page 64) 2 White balance setting (page 82) 3 Recording mode (page 48) 4 Remaining movie memory capacity (page 48) 5 Movie recording .
12 . Snapshot Viewing . Movie Playback 1 File type 2 Protect indicator (page 105) 3 Folder name/file name (page 137) 4 Snapshot image quality (page 79) 5 Snapshot image size (page 30) 6 ISO sensitivit.
13 Quick Start Basics Quick Start Basics What is a digital camera? A digital camera stores images on a memory card, so you can record and delete images a countless number of times. You can use the images you record in a variety of different ways. Store images on your computer.
14 Quick Start Basics Your CASIO camera is packed with a powerful se lection of features and functions to make recording of digital images easier , in cluding the following thr ee main functions. What you can do with your CASIO came ra BEST SHOT Simply select the sample scene you want and the camera sets up automatically.
15 Quick Start Basics Note that the battery of a newly p urchased camera is not charged. Pe rform the steps under “To charge the battery” to bring the battery to a full char ge. • Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for power.
16 Quick Start Basics Other Charging Precautions • Use the special charger (BC-80L) to char ge the special lithium ion battery (NP-80). Never use any other type of charg er device. Attempting to use a differ ent charger can result in unexpected accident.
17 Quick Start Basics 3. Close the battery cover. Pressing the battery cover against the camera , slide it closed. • For information about how to replace the battery, see page 160. Checking Remaining Battery Power As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below.
18 Quick Start Basics The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date a nd time correctly will cause the wrong date and time data to be recorded with images.
19 Quick Start Basics NO TE • Each country controls its local time offs et and the use of summer time, and so they are subject to change. • Removing the battery from the camera too soon after config uring time and date settings for the first time can cause the se ttings to be reset to their factory defaults.
20 Quick Start Basics 3. Close the battery cover. Pressing the battery cover against the camer a, slide it closed. • For infor mation about how to replace the memory card, see page 161. IMPORT ANT! • Never insert anything besides a supported memory card (page 19) into the memory card slot.
21 Quick Start Basics To enter the REC mode, press [ON/OF F] (Power) or [ r ] (REC). To enter the PLAY mode, press [ p ] (PLAY). The back lamp will light (green) momentarily and the camera will turn on. If you are entering the REC mode, the lens will extend from the camera at this time.
22 Quick Start Basics 1. Press [ r ] (REC) to turn on the camera. Make sure R is on the display. If it isn’t, see page 53. 2. Point the camera at the subject.
23 Quick Start Basics 3. Half-press the shutter button to focus the image. When focus is complete, the camera will beep, the back lamp will light green, and the focus frame will turn green. 4. Continuing to keep the camera still, press the sh utter button the rest of the way down.
24 Quick Start Basics . If the image does not focus... If the focus frame stays red and the back la mp is flash ing green, it means that the image is not in focus (because the subject is too close, etc.) Re-point the camera at the subject and try to focus again.
25 Quick Start Basics Your images will not come out clear ly if you move the camera when you press the shutter button. When pressing the shutter button, be sure to hold the camera as shown in the illustration below, and keep it still by pressing your arms firmly against your sides as you shoot.
26 Quick Start Basics Use the following procedure to view snapshots o n the camera’s monitor screen. • For information ab out how to play back movies, see p age 86. 1. Press [ p ] (PLAY) to enter the PLAY mode. • This will display one of the snapshots currently stored in memory.
27 Quick Start Basics If memory becomes full, you can delete images you no longer need to free up storage and record more images. IMPORT ANT! • Re member that a file (image) delete operation cannot be undone. • De leting an audio snapshot (page 109) deletes both the snapshot and the a udio file.
28 Quick Start Basics Operation • Ne ver open the battery cover while the bac k lamp is flashing g reen. Doing so can result in the image you just shot being sa ved incorrectly, damage to other images stored in memory, malfunction of the camer a, etc.
29 Snapshot Tutorial Snapshot Tutorial The Control Panel can be used to con figure camera settings. 1. In the REC mo de, press [SET]. This will select one of the Control Panel icons and display its settings. 2. Use [ 8 ] and [ 2 ] to select the setting you want to change.
30 Snapshot Tutorial You can use the following procedure to specify the eight items you want on the Control Panel. 1. In the REC mode, press [SET] to disp lay the Control Panel. Next, press [MENU]. • This will display a menu o f Control Panel items, with the items currently selected fo r display shown in green.
31 Snapshot Tutorial . About imag e sizes The size of an image indicates how many pi xels it contains, and is expressed as horizontal pixels x vertical pixels. Image Size Selection Tips Note that larger images have more pixe ls , so they take u p more memory space.
32 Snapshot Tutorial . To select the image size 1. In the REC mo de, press [SET]. 2. Use [ 8 ] and [ 2 ] to select the top Control Pane l option (Image Size). 3. Use [ 4 ] and [ 6 ] to select an image size and then press [SET]. • T he initial factory default image size setting is “12M”.
33 Snapshot Tutorial 1. In the REC m ode, pres s [ 2 ] ( ) once. 2. Use [ 4 ] and [ 6 ] to select the flash setting you want and then press [SET]. When the “ R Panel” menu item (page 140) is “Off” (so the Control Panel is not displayed), pressing [ 2 ] ( ) will cycle through t he available flash settings.
34 Snapshot Tutorial NO TE • T ake care so your fingers and the strap do not block the flash. • The desir ed effect may not be obtained when the subject is too far away or too close. • Flash charging time (pa ge 178) depends on operating conditions (battery condition, ambient temperature, etc.
35 Snapshot Tutorial 1. In the REC mo de, press [SET]. 2. Use [ 8 ] and [ 2 ] to select the third Control Pan el option from the top (AF Area). 3. Use [ 4 ] and [ 6 ] to select the setting you want and then press [SET]. 4. Point the camera at the subject and ha lf-press the shutter button.
36 Snapshot Tutorial ISO sensitivity is a measur e of sensitivity to light. 1. In the REC mo de, press [SET]. 2. Use [ 8 ] and [ 2 ] to select the fourth Control Panel option from the top (ISO Sensiti vity). 3. Use [ 4 ] and [ 6 ] to select the setting you want and then press [SET].
37 Snapshot Tutorial Your camera has three continuous shutter modes. * To turn off a continuo us shutter mode, select “Off”. 1. In the REC mo de, press [SET]. 2. Use [ 8 ] and [ 2 ] to select the fifth Control Pa nel option from the top (Continuous Shutter).
38 Snapshot Tutorial Specify the method to use for saving images recorded with the following continuous shutter (CS) mode. CS: High Speed CS 1. After continuous shutt er shooting is finished, use [ 8 ] and [ 2 ] to select the save meth od you want and then press [SET].
39 Snapshot Tutorial IMPORT ANT! • If there is not enough available capacity on the memory card, you may not be able to record the number of CS images indicated o n the monitor screen. Make sure your memory card has sufficient remaining ca pacity before shooting with using continuous shutter.
40 Snapshot Tutorial When shooting people, the face detection feature detects the faces of up t o ten individuals and adjusts focus and brightness accordingly.
41 Snapshot Tutorial Tips for Best Face Detection Results • The ca mera performs center focus if it cannot detect a face. • Always make sure th at Auto Focus (AF) is selected as the focus mode when shooting with face detection. • Face d etection may take a bit longer when you hold the camera sideways.
42 Snapshot Tutorial The Make-up Mode smoothes the skin text ure of the subject and softens facial shadows caused by harsh sunlight for better lo oking portraits. 1. In the REC m ode, pres s [ 4 ] or [ 6 ] to turn on the Make-up Mode. • The Make-up Mode icon ± will be displayed on the monitor screen while the Make-up Mode is turned on.
43 Snapshot Tutorial The easy mode eliminates troublesome setups and simplifies snapshot recording. This mode is recommended for those who are new to digital imaging. 1. In the REC mo de, press [SET]. 2. Use [ 8 ] and [ 2 ] to select the second Cont rol Pa nel option from t he bottom (easy Mode).
44 Snapshot Tutorial 1. Press [MENU]. The easy menu displays larger text than standard menus. 2. Use [ 8 ] and [ 2 ] to select the menu item you want, and then press [SET]. 3. Use [ 8 ] and [ 2 ] to select the setting yo u want, and then press [SET]. • An asterisk ( * ) indicates reset default settings.
45 Snapshot Tutorial 1. In the REC mo de, press [SET]. 2. Use [ 8 ] and [ 2 ] to select the bottom Control Panel option (Date/Time). Use [ 4 ] and [ 6 ] to select the date or time. NO TE • You can select either of two display style (page 145) for the date: Month/Day or Day/Month.
46 Snapshot Tutorial NO TE • The higher the digital zoom factor, the coarser the recorded imag e. Note that the camera also has a function that lets y ou reco rd using digital zoom without im age deterioration (page 47). • Use of a tripod is recommended to protect against image blur due to ca mera movement when shooting with telephoto.
47 Snapshot Tutorial • T he image deterioration point depends on the image size (page 30). The smaller the image size, the higher the zoom factor you can use before reaching the image deterioration point.
48 Recording Movie Images and Audio Recording Movie Images and Audio 1. Configure the quality setti n g for the movie (page 80). The length of the movie you can reco rd will depend o n the quality setting you select. 2. In the REC m ode, pres s [ 0 ] (Movie).
49 Recording Movie Images and Audio NO TE • Spending a long time usin g movie record ing will cause the camera to become slightly warm to the touch. This is normal and does n ot indicate malfunction. • The ca mera also records audio. Note the following points when shooting a movie.
50 Recording Movie Images and Audio With this feature, the camera prerecords up to four seconds of whatever is happening in front of the lens in a buffer t hat is continually updated. Pressing [ 0 ] saves the prerecorded action (buffer cont ents) follow ed by real-time recording.
51 Recording Movie Images and Audio 1. While a m ovie is b eing record ed, press the shutter button. Movie recording continues a fter the snapshot is recorded. NO TE • You can use [ 2 ] ( ) w hile shooting a movie to change the flash mode setting. • Movie recording is inter rupted for a few seconds at the point w here a snapshot is recorded.
52 Recording Movie Images and Audio NO TE • You can use [ 8 ] (D ISP) during audio recording to toggle the monitor screen on and off. • When mon itor screen contents are turned off, selecting the “Voice Recording” scene will cause the monit or screen to turn off immediately (page 150).
53 Using BEST SHOT Using BEST SHOT BEST SHOT provides you with a collection of sample “scenes” that show a variety of different types of shooting conditions. When you need to change the setu p of the camera, simply find the scene that matches wh at you are trying to achieve, and the camera sets up for it automatically.
54 Using BEST SHOT 3. Press [SET] to configure the camera with the settings for the currently selected scene. This returns to the REC mode. • The settin gs of the scene you selected remain in effect until you select a different scene. • To select a differ ent BEST SHOT scene, repeat the above procedure fro m step 1.
55 Using BEST SHOT . BEST SHOT Precautio ns • The following BEST SHOT scenes cannot be used while recording a movie: Dynamic Photo, Multi-motion Image, ID Photo, Business cards and documents, White board, etc.
56 Using BEST SHOT You can save up to 999 camer a setups as user BEST SHOT scenes for instant recall whenever you need them. 1. On the BEST SHOT scene menu, sel ect the sce ne named BEST SHOT (Register User Scene). 2. Use [ 4 ] and [ 6 ] to select the snapshot or movie whose setup you want to save.
57 Using BEST SHOT With AUTO BEST SHOT, the camera auto matically selects the BEST SHOT scene that suits your subje ct and shooting conditions, and configures its setting s accordingly. The following are the scenes selected automat ically by AUTO BEST SHOT.
58 Using BEST SHOT You can use this procedure to shoot a portrait and then print it out in the following standard ID photo sizes: 30 x 24mm, 40 x 30mm, 45 x 35mm, 50 x 40mm, 55 x 45mm. 1. Press [BS] and then select the “ID Photo” scene. 2. Press the shutter button to shoot a po rtrait of the person for whom y ou want to cre ate an ID ph oto.
59 Using BEST SHOT 1. Press [BS] and then select the “B usiness cards and documents” or “White board, etc.” scene. 2. Press the shutter button to shoot the image. This image will appear on the monitor screen with a red boundary around the area that is selected for keystone correction.
60 Using BEST SHOT NO TE • When composin g an image like the ones shown above, make sure that the entire outline of the object you are trying to s hoot is enclosed within the monitor screen. • Make sure the object is against a background that allows its outline to stand out.
61 Using BEST SHOT NO TE • T o shoot with the self-portrait feature in combination with a continuous shutter (CS) mode (page 37), turn off the Make-up Mode (pa ge 42). Operation is the same as that when a continuous shutter (CS) mode is used in combination with Auto Shutter.
62 Advanced Settings Advanced Settings The following are menu op erations you can use to configure var ious camera settings. • You also can use the Control Panel (page 29) to configure some of the settings that appear on the menu screen.
63 Advanced Settings 3. Use [ 8 ] and [ 2 ] to select the menu item you want, and then press [ 6 ]. 4. Use [ 8 ] and [ 2 ] to change the setting. 5. After the setting is the way you want, press [SET]. • Pressing [ 4 ] registers the selected setting and returns to the menu.
64 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Focus *1 The focus ran ge is the dist ance from the le ns surface. *2 The minimum chan ges along with the optical zoom setting. *3 The distanc e depends on shoo ting condit ions, and app ears on the moni tor screen when the shut ter button i s half-press ed.
65 Advanced Settings *4 (m) NO TE • Above value s are for reference only. For movie macro, the focus range is a few centimeters within the center distance. Normal Macro Zoom Steps Close Up Tel ephoto Center distance Z1 (Wide) Approx. 0.60 (2.0') 9 0.
66 Advanced Settings To focus with manual focus 1. On the monitor screen, compose the image so the subject you want to focus on is within the yello w boundary.
67 Advanced Settings Using Focus Lock “Focus lock” is a technique y ou can use when you want to compose an image in which the subject you want to focus on is not within the focus frame in the center of the screen. • T o use focus lock, s elect “ Í Spot” or “ Ë T racking” for the Auto Focus area (page 35).
68 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Self-timer With the Self-timer, pressing the shutter butto n starts a timer. The shutt er is released and the image is shot after a fixed amount of time. • The fron t lamp flashes while the Self-timer countdown is in progress.
69 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Auto Shut ter With Auto Shutter, the camera rele ases th e shutter automatically when it detects that certain conditions are present. . To use Detect Blur to minimize image blur (Detect Blur) 1.
70 Advanced Settings . To use Detect Panning to minimize i mage blur (Dete ct Panning) 1. Point the camera at location where the subject will pass and then half- press the shutter button to adjust exposure and focus. 2. Press the shutter button the rest of the way down.
71 Advanced Settings . To change Auto Shutter trig ger sensitivity (Sensitivity) 1. Use [ 8 ] and [ 2 ] to select “Sensitivity” and then pre ss [ 6 ]. 2. Use [ 4 ] and [ 6 ] to select the sensitivity setting you want, and then press [SET]. • You can select any one of three sen sitivity levels, from ø (Lowest) to œ (Highest).
72 Advanced Settings IMPORT ANT! • If the camera remains in Auto Shutter standby without releasing the shutte r, you can record an image by pressing the shutter butto n all the way down again.
73 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Anti Shake You can turn on the camera’s Anti Shake feature to reduce image blur due to subject movement or camera movement when shooting a movin g subject using telephoto, when shooting a fast-moving subject, or w hen shooting under dim lighting conditions.
74 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * AF Area For details, see the Control Pane l procedure on page 35. Procedure [ r ] (REC) * [MENU] * REC Tab * Focus Frame You can use this procedure to select from among five different shapes, including a heart shape, for the focus frame.
75 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Digital Zoom You can use this setting to turn digital zoom on or off. When digital zoom is turned off, operating the zoom controller zoom s the image with optical zoom only.
76 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Quick Shutter When Quick Shutter is turned on, you can pr ess the shutter button all the way without waiting for Auto Focus. This will record the image using a high-speed focus operation that is much faster than Auto Focus.
77 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Grid The on-screen grid can be displayed on the REC mode monitor screen for easy ve rt ical and horizontal alignment when composing images.
78 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Memory When you turn off the camera, it remembe rs the current settings of all enabled memory items and restores them when you tu rn it back on. Any me mory item that is disabled will be returned to its initial defaul t setting whenever you turn off the camera.
79 Advanced Settings Procedure [ r ] (REC) * [MENU] * Quality Tab * Size For details, see the Control Pane l procedure on page 32. Procedure [ r ] (REC) * [MENU] * Quality Tab * T Quality (Snapshot) .
80 Advanced Settings Procedure [ r ] (REC) * [MENU] * Quality Tab * » Quality (Movie) Movie image quality is a standard that determi nes the detail, smoothness, and clarity of a movie during playback. Shootin g with the high-quality (HD) setting will result in better image quality, but it also shortens the amount of time you can shoot.
81 Advanced Settings Procedure [ r ] (REC) * [MENU] * Quality Tab * EV Shift You can manually adjust an image’s exp osure value (EV value) before shooting it. • Exposure Comp ensation Range: –2.0EV to +2.0EV • Unit: 1/3EV 1. Use [ 8 ] and [ 2 ] to adjust the exposur e compensation value.
82 Advanced Settings Procedure [ r ] (REC) * [MENU] * Quality Tab * W hite Balanc e You can adjust white balance to match the source of light available where you are shooting and avoid the blue cast that results when shooting outdoors when it is cloudy, and the green cast that results when shooting under fluorescent lighting.
83 Advanced Settings Procedure [ r ] (REC) * [MENU] * Quality Tab * IS O For details, see the Control Pane l procedure on page 36. Procedure [ r ] (REC) * [MENU] * Quality Tab * Metering The metering mode determines what part of t he subject is metered for exposure.
84 Advanced Settings Procedure [ r ] (REC) * [MENU] * Quality Tab * Lighting You can use this setting to optimize th e balance between bright areas an d dark areas when shooting images. • You also can optimize the balance between bright areas and dar k areas in existing images (page 101).
85 Advanced Settings Procedure [ r ] (REC) * [MENU] * Quality Tab * S aturation You can specify one of five satura tion setti ngs from +2 (most saturated) to –2 (least saturated).
86 Viewing Snapshots and Movies Viewing Snapshots and Movies See page 26 for the procedure for viewing snapshots. 1. Press [ p ] (PLAY) and th en use [ 4 ] and [ 6 ] to display the movie you want to view. 2. Press [SET] to start playback. Movie Playback Controls • Playba ck may not be possible for movies not recorded with this camera.
87 Viewing Snapshots and Movies Each time you perform a continuous shutter (CS) operation, the camera creates a CS group that includes all of the images for th at particular CS session. You can use the following procedure to play back the images in a particular CS group.
88 Viewing Snapshots and Movies NO TE • Multiple images sho t using “CS: Normal Speed CS” are stored individually and are not grouped. This means they can be displa yed individually (page 26) but not as a CS group. You can use the following procedu res to del ete images while playback is in progress or paused.
89 Viewing Snapshots and Movies Use the following to divide up a CS Group into individual images. . Dividing Up a Specific CS Gro up 1. While a CS group fo lder is displa yed, press [MENU]. 2. Use [ 4 ] and [ 6 ] to select “PLAY” tab . 3. Use [ 8 ] and [ 2 ] to select “Divide Gr oup” and then press [ 6 ].
90 Viewing Snapshots and Movies 1. In the PLAY mode, us e [ 4 ] and [ 6 ] to scroll through the images un til the one you want is dis played. 2. Slide the zoom co ntroller towards z ( [ ) to zoom. You can use [ 8 ], [ 2 ], [ 4 ], and [ 6 ] to scroll the zoomed image on the monitor screen.
91 Viewing Snapshots and Movies 1. In the PLAY mode , slide the zoom controller towards w ( ] ). Use [ 8 ], [ 2 ], [ 4 ] and [ 6 ] to move the selection boundary around the image menu. To view a particular image, use [ 8 ], [ 2 ], [ 4 ], or [ 6 ] to move the selection boundary to the image you want and then press [SET].
92 Viewing Snapshots and Movies 1. Use the AV cable tha t comes with th e camera to connect it to the TV. • Ma ke sure that you insert the cable connector into the USB/AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.
93 Viewing Snapshots and Movies 3. Press [ p ] (PLAY) to turn on the camera. This will cause an image to appear on the TV screen, without anything ap pearing on the camera’s monitor screen. • Pressing [ON/OFF] o r [ r ] (REC) will not turn on the camera while the AV cable is connected.
94 Other Playback Functions (PLAY) Other Playback Functions (PLAY) This section explains menu items that you can use to configure settings and perform other playback operations. Procedure [ p ] (PLAY) * [MENU] * PLAY Tab * Slideshow For information about menu operations, see page 62 .
95 Other Playback Functions (PLAY) • To sto p the slideshow, press [SET]. Pres sing [MENU] instead of [SET] stops the slideshow and returns to the menu screen.
96 Other Playback Functions (PLAY) 1. Connect the camera to your computer (pages 123, 132). If you plan to save the music files to the camera’s memory card, make sure the card is loaded in the camera. 2. Perform one of the following operat ions to open the memory card or built-in memory.
97 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Spnapshot Screen * [MENU] * PLAY Tab * Layout Print You can use the following procedure to insert existing snapshots into the frames of a layout and produce a new image that contains multiple snapshots.
98 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Movie Screen to be Used * [MENU] * PLAY Tab * MOTION PRINT 1. Use [ 4 ] and [ 6 ] to scroll through the movie frames and display the one you want to use as the image of the MOTION PRINT image.
99 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Movie Screen of Movie to be Edited * [MENU] * PLAY Tab * Movie Ed iting The Movie Editing feature lets you use one of the follow ing procedures to edit out a specific part of a movie. 1. Use [ 8 ] and [ 2 ] to select the editing method yo u want to use and then press [SET].
100 Other Playback Functions (PLAY) 3. When the frame where you want the cut point to be is displayed, press [ 2 ]. 4. Use [ 8 ] and [ 2 ] to select “Yes” an d then press [SET]. The selected cut operation will take cons iderable time to complete. Don’t try to perform any camera operation until the “Busy.
101 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Lighting You can use this setting to optimize th e balance between bright areas an d dark areas in existing images. NO TE • Co rrecting the lighting when shooting produces better result s (page 84).
102 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * White Balanc e You can use the white balance setting to select a light source type for a recorded image, which will affect the colors of the image. NO TE • You also ca n adjust the white balance w hen recording images (page 82).
103 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Brightness You can select one of five brightness levels , from +2 (brightest) to –2 (least bright). NO TE • The original snapshot is retained in memory and not deleted.
104 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Color Correction Color Correction lets you correct the color of an old photograph. The corrected image is saved as 2M (1600 x 1200 pixels) size. 1. Perform the above operation.
105 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printin g See page 118 for details. Procedure [ p ] (PLAY) * [MENU] * PLAY Tab * Protect IMPORT ANT! • No te that even if a file is protected, it will be deleted if you perform the format operation (page 149).
106 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Date/Time When the date and time settings are what you want, pr ess [SET] to apply them. NO TE • The date and time stamped into an image using the Time Stamp (page 144) cannot be edited.
107 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Resize You can reduce the size of a snapshot and save the r esult as a separate snapshot. The original snapshot is also reta ined. Y ou can select resize an image to one of three image sizes: 8M, 5M, VGA.
108 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Dubbing You can add audio to a snapshot after you shoot it. You can re-record a snapshot’s audio whenever you want. You can record up to about 30 seconds of audio for a single snapshot.
109 Other Playback Functions (PLAY) 1. In the PLAY mode, us e [ 4 ] and [ 6 ] to scroll through the images un til the Audio Snapshot yo u want is disp layed.
110 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Copy Files can be copied from the camera’s built-in memory to a memory car d or from a memory card to built-in memory. NO TE • You can copy sna pshots, movies, audio snapshots, or Voice Recording files you recorded with this camera.
111 Dynamic Photo Dynamic Photo You can use the procedures in this section to cr op either a moving subject or a still subject out of a snapshot and then in sert it into ano ther snapshot. 1. Press [BS] and then select th e “Dynamic Photo” scene. 2.
112 Dynamic Photo 3. First, shoot an image that includes the subject you want to extrac t. • Sho ot an image in which the subject is as large as possible. Also, the image sh ould include some easily identifiable referenc e point that you can use for later alignment in step 4, below.
113 Dynamic Photo Use the following procedure to insert a subject into a new background image. A Dynamic Photo with a moving subj ect is saved as a 2M (1600 x 1200 p ixels) or smaller size image. A Dynamic Photo with a still subject is saved as a 6M (2816 x 2112 pixels) or smaller size image.
114 Dynamic Photo NO TE • The ca mera comes with a number of extr acted sample subjects in its built-in memory, which you can use to creat e Dynamic Photos, if you like. • Per forming a delete or format operation wi ll delete the sample subjects in built-in memory.
115 Printing Printing • You can specify which images you want to print, the number of copies, and date stamp settings before printing (page 118). Printing Snapshot s Professiona l Print Service You can take a memory card that contains the images you want to print to a professional pr int service and have them printed.
116 Printing You can connect the camera directly to a printer that suppor ts PictBridge and print images without going through a computer. . To set up the camera before connecting to a printer 1. Turn on the camera and press [MENU]. 2. On the “Set U p” tab, selec t “USB” and then press [ 6 ].
117 Printing . To print 1. Turn on the prin ter and load paper. 2. Turn on the camera. This will display the print menu screen. 3. Use [ 8 ] and [ 2 ] to select “Paper Size”, and then press [ 6 ]. 4. Use [ 8 ] and [ 2 ] to select a paper size and then press [SET].
118 Printing . Digital Print O rder Format (DPOF) DPOF is a standard that allows you to include image type, number of copy, and time stamp on/off information on the memory card with the images.
119 Printing DPOF settings are not cleared automati cally af ter printing is co mplete. The next DPOF print operation you execute will be performed using the last DPOF settings you configured for the images. To clear DPOF settings, specify “00” for the number of copies of all images.
120 Printing . Standards Supported by the Camera • PictBridge This is a standard of the Camera and Imaging Products Association (CIPA). You can connect the camera directly t o a printer that supports PictBridge, and perform image selection and printing using the camera monitor screen and controls.
121 Using the Camera with a Computer Using the Camera with a Computer You can perform the operations described below while the camera is connected to a computer. * Windows only The procedures you need to per form when us ing the camera with your computer and when using the bundled software are different for Windows and the Macintosh.
122 Using the Camera with a Computer Install the required software in acco rdance with the version of Windows you are running and what you want to do. * YouTube Uploa der for CASIO an d Photo Transpo rt will not r un under 64-bit versions of Windows Vist a.
123 Using the Camera with a Computer . Computer System Requiremen ts for Bundled Software Computer system requiremen ts are different for each of the applications.
124 Using the Camera with a Computer 4. Turn off the camera and then use the USB cable that comes w ith the camera to connect it to your compute r. • The camera d oes not draw power over the USB cable. Make sure the camera’s battery is sufficiently charged before connecting.
125 Using the Camera with a Computer 8. Right-click the “DCIM” folder. 9. On the shortcut menu that appears, cl ick “Copy”. 10. Windows Vista users: Click “S tart” and then “Documents”. Windows XP users: Click “Sta rt” and then “My Documents”.
126 Using the Camera with a Computer 3. Double-click the image file you want to vie w. • For infor mation about file names, see “Memory Folder Structure” on page 138. • An image th at was rotated on the camera will be displayed on your computer screen in its original (unrotated) orientation.
127 Using the Camera with a Computer . Movie Playback Precaution s • Be sure t o move the movie data to the hard disk of your computer before trying to play it. Proper movie playback may not be possible for data accessed over a network, from a memory card, etc.
128 Using the Camera with a Computer . To upload a movie file to YouTu be • Befor e you can use YouTube Uploader for CASIO, you need to go to th e YouTube website (http://www.
129 Using the Camera with a Computer If you want to transfer images from your computer to the camera, install Photo Transport on your computer from the CD-ROM that come s with the camera. . To instal l Photo Tran sport 1. On the CD-ROM menu screen, se lect “Photo Transport” .
130 Using the Camera with a Computer . To transfer compu ter screen captures to the camera 1. Connect the camera to yo ur computer (page 123). 2. On your computer, clic k the following: Start * All Programs * CASIO * Photo Transport. This starts up Photo Transport.
131 Using the Camera with a Computer You can copy moving subjects (animated c haracters) from your computer to the EXILIM. You also can convert Dynamic Phot o images to movies a nd send them to a mobile phone for playback.
132 Using the Camera with a Computer Install the required software in acco rdance with what version of the Macintosh OS you are running and what you want to do. IMPORT ANT! • The ca mera does not support operation with Mac OS 8.6 or earlier, or Mac OS X 10.
133 Using the Camera with a Computer 4. Turn off the camera and then use the USB cable that comes w ith the camera to connect it to your Macintosh. • The camera d oes not draw power over the USB cable. Make sure the camera’s battery is sufficiently charged before connecting.
134 Using the Camera with a Computer 8. After the copy operation i s complete, drag the drive icon to Trash. 9. On the camera, press [ON/OFF] to turn off the camera. After making sure that the gree n back lamp is un lit, disconnect the camera from the comput er.
135 Using the Camera with a Computer You can use QuickTime, which comes bundled with your operati ng system, to play back movies on a Macintosh. To play back a movie, first cop y it to your Macintosh and then double-click the movie file.
136 Using the Camera with a Computer You must have Adobe Reader or Adobe Acrobat Reader installed on your computer in order to view the contents of a PDF file. If you don’t, g o to the Adobe Systems Incorporated website and install Acrob at Reader. 1.
137 Using the Camera with a Computer The camera creates a file and saves it each time you shoot a snapsh ot, record a movie, or perform any other ope ration that stores data. Files are grouped by storing them in folders. Each file and folder has its o wn unique name.
138 Using the Camera with a Computer The camera stores images you shoot in accordance with the Design Rule for Camera File System (DCF). . About DCF DCF is a standard that makes it possible to view and print images recorded on one manufacturer’s camera on DCF-compliant de vices pr oduced by other manufacturers.
139 Using the Camera with a Computer . Supported Imag e Files • Image files shot with this camera • DC F-compliant image files This camera may not be able to display an image, even if it is DCF-compliant. When displaying an image recorded on another camera , it may take a long time for the image to appear on this camera’s monitor screen.
140 Other Settings (Set Up) Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode. Procedure [MENU] * Set Up Tab * R Panel The REC mode screen layout settings le t you select t he layout of icons.
141 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * P Display The PLAY mode screen layout settings let y ou select how display images are shown on the monitor screen.
142 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Sounds • Setting a volume level of 0 mutes outpu t. Procedure [MENU] * Set Up Tab * Startup Display the image you want to use as yo ur startup image and then select “On”. • The startup image does not appear when you turn on the camera by pressing [ p ] (PLAY).
143 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * File No. Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 137).
144 Other Settings (Set Up) 3. Use [ 8 ], [ 2 ], [ 4 ], and [ 6 ] to select the geographic a rea you want and then press [SET]. 4. Use [ 8 ] and [ 2 ] to select the city you want and then press [SET].
145 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Adjust When the date and time settings are what you want, select “ Apply” and then press [SET] to apply them. • You can specify a date f rom 2001 to 2049. • Be sure t o select your Home City (page 143) before setting the time and d ate.
146 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Language . Specify the display lang uage you want. 1 Select the tab on the right. 2 Select “Language”.
147 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Auto Power Off Auto Power Off turns off the camera whenever no camer a operation is performed for a preset amount of time. Trigger Time Settings: 1 min, 2 min, 5 min (T he trigger time is alwa ys 5 minutes in the PLAY mode.
148 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * USB You can use the procedure below to select the USB communication protocol, which is used when exchanging data with a computer, printer, or other external device.
149 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Format If a memory card is load ed in the camera, this operation will format the me mory card. It will format built-in memory if no memory card is loaded. • The format operation will delete all conten ts on the memory card or in built-in memory.
150 Configuring Monitor Scre en Settings Configuring Monitor Screen Settings You can turn display in formation on and off by pressing [ 8 ] (DISP). You can configure separate settings for the REC mode and PLAY mode . Displays a histogram on the monitor screen which you can u se to check the exposure of an image befo re you shoot it.
151 Configuring Monitor Scre en Settings A histogram is a graph that represents the lightness of an image in terms of the number of pixels. The vertical axis indica tes the number of pixels, while the horizontal axis indicates lightness.
152 Appendix Appendix . Avoid Use While In Motio n • Ne ver use the camera to record or pl ay back images while operating an automobile or other vehicle, or while walking. Lookin g at the monitor while in motion creates the risk of serious accident.
153 Appendix . Smoke, abnormal odor, overheati ng, and other abn ormalities • Co ntinued use of the camera while it is emitting smoke or strange odor, or while it is overheating creates the risk of fire and elect ric shock. Immediately perform the following steps wheneve r any of the above symptoms are present.
154 Appendix . Locations To Be Avoide d • Ne ver leave the camera in any of the following types of locations. D oing so creates the risk of fire and electric shock.
155 Appendix • Should you ever notice lea kage, strange odor, heat generation, discoloration, deformation, or any other abnormal cond iti on while using, charging, or storing a battery, immediately remove it from the camera or charger unit and keep it away from open flame.
156 Appendix . Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory.
157 Appendix . Caring for your camera • Ne ver touch the lens or flash window wi th your fingers. Finger smudges, dirt, and other foreign matter on the lens or flash window ca n interfere with proper operation of the camera.
158 Appendix . Other Precaution s The camera becomes slightly warm dur ing use. This is normal and does not indicate malfunction. . Copyrights Except for your own personal enjoyment, unau thorized use of use of sna pshots or movies of images whose rig hts belong to others, without the permission of the right holder, is forbidden by copyright laws .
159 Appendix Any and all unauthorized commercial copying, distribution, and copying of the bundled software over a networ k are prohibited. This product contains PrKERNELv4 Real- time OS of eSOL Co., Ltd. Copyright © 2007 eSOL C o., Ltd. PrKERNELv4 is a registered trademark of eSOL Co.
160 Appendix 1. Open the battery cover and remove the current battery. With the monitor screen side of the camera facing upwards, slide the stopper in the direction indicated by the arrow in the illustration. After the battery pops out, pull it the rest of the way out of the camera.
161 Appendix . Precautions during Use • The bundled charger is designed for operati on with any power supply in the range of 100V to 240V AC, 50/60Hz.
162 Appendix . Using a Memory Card • SD memo ry cards and SDHC memory cards have a write protect switch. Use the switch when you need to guard against accidentally deleting data.
163 Appendix Computer system requiremen ts are different for each of the applications. Be sure to check the requirements for the particular a ppl ication you are trying to use. Note that the values provided here are minimum r equirements f or running each application.
164 Appendix The tables in this section show the initia l default settings that are configured for menu items (displayed when you press [MENU]) af ter you reset the camera (page 149). Menu items depend on whether the camer a is in the REC mode or PLAY mode.
165 Appendix “Quality” Tab “Set Up” Tab Size 12M (4000 x 3000) Quality (Snapshots) Normal Quality (Movies) STD EV Shift 0.0 White Balance Auto ISO Auto T » Metering B Multi Lighti ng Extra Co.
166 Appendix . PLAY Mode “PLAY” Tab “Set Up” Tab • The co ntents of the “Set Up” tab are the same in the RE C mode and PLAY mode. Slideshow Images: All images / Time: 30 min / Interval: .
167 Appendix When things don’t go rig ht... Troubleshooting Problem Po ssible Cause an d Recommended Actio n Power Supply Power does not turn on. 1) The battery ma y not be load ed correctly (page 16 ). 2) The battery may b e dead. Ch arge the batt ery (page 15).
168 Appendix The subject is out of focus in the recorded i mage. The image may not be focused pro perly. When co mposing the image, make s ure the subje ct is locat ed inside th e focus fra me. The flash does not fire. 1) If ? (Flash Off) is selected as t he flash mod e, change to another mode (page 33).
169 Appendix A recorde d image was not saved. 1) Camera power may have been turned off b efore the s ave operation was co mplete, which will re sult in the image not being save d. If the ba ttery indica tor shows , charge the battery as soon as poss ible (page 17).
170 Appendix When shoot ing with Auto Sh utter, the shutter doe s not trigger. Auto Shutte r may not trigge r when shooti ng under ver y bright or very dark con ditions, or when shooting a fast moving su bject, etc.
171 Appendix Images c annot be transferre d over a USB connec tion. 1) T he USB cable may not be connected s ecurely. Chec k all connecti ons. 2) T he wrong USB communi cation prot ocol is select ed. Select the correc t USB communicati on protocol in accordanc e with the type of d evice you are co nnecting (p ages 123, 132) .
172 Appendix Display Messages ALERT The camera’s protection function may have activated because camera temperature is too high. T urn off the camera and wait until it cools down before trying to use it again. Battery is low. Battery power is low. Cannot correct image! Keystone correction of the image cannot be performed for some reason.
173 Appendix LENS ERROR This message appears and the camera tur ns off whenever lens performs some unexpected operation. If the same message appears after you turn power back on, contact a CASIO authorized service center or your original retailer. LENS ERROR 2 The Camera Shake unit may be ma lfunctioning.
174 Appendix There is no image to register. The setup you are trying to save is for an image that cannot be saved as a user BEST SHOT scene. This card is not formatted. The memory card loaded in the camera is not formatted. Format the memory card (page 149).
175 Appendix Snapshot Number of Snapshots/Movie Recording Time/ Voice Recording Time Image Size (Pixels) Image Quality Approximate Image File Size Built-in Memory (Approx. 35.7MB * 1 ) Snapsho t Recording Capacity SD Memory Car d (1GB * 2 ) Snapshot Recording Capacity 12M (4000 x 3000) Fine 7.
176 Appendix Movies Voice Recording *1 Built-in memory capacity after formatting *2 The above valu es are based on use of a PRO HIGH SPEED SD memory card (Panasonic Corporation ). The number of images you can sa ve depends on the type of memory card you ar e using.
177 Appendix Specifi cations File Forma t Snapsh ots: JPEG (Exif Ve rsion 2.2); DCF 1.0 standard ; DPOF compliant Movies: Motion JPEG AVI, IMA -ADPCM audio (monaural) Audio (Voic e Recording) : WAV (monaural) Recordin g Media B uilt-in Memory (Image Storage Are a: 35.
178 Appendix Exposure Compens ation –2.0 EV to +2. 0 EV (in 1/3EV step s) Shutter CCD shutter, mechan ical shutter Shutter Spe ed Snap shot (Auto) : 1/2 to 1/200 0 second Snapshot (Night Sce ne): 4 to 1/2000 se cond * May differ due to the ca mera setup.
179 Appendix Approximate Battery Life All of the values provided below represent the approximate amount o f time under normal temperature (23°C (73°F )) before the camera turns off. These values ar e not guaranteed. Low temperatures shor ten battery life.
180 Appendix . Rechargeable lithium ion battery (NP-80) . Charger unit (BC-80L) • Power cord precautions for use in Singapore The power cord set is not supplied. The power cord used must comply with relevant national and/or international sta ndards.
CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan MA0908-C M10.
D ynamic P hoto For a wealth of informatio n about Dynamic Photo incl uding explanations abou t how to use Dynamic Photo images , the Dynamic Studio image conversion service, sa mple images, and more,.
2 Dynamic Photo! A totally new way to enjoy digital photography! Dynamic Photo! A totally new way to enjoy digital photography! Dynamic Photo makes it easy to crop a movi ng subject out of a series of.
3 Using the Dynamic Photo Extracted Sample Subjects Using the Dynamic Photo Extracted Sampl e Subjects Your digital camera comes with a number of extracted sample subjects in its built-in memory. You can use these sample subjec ts to practice creating Dynamic Photo images by inserting them into your original snapshots.
4 Using the Dynamic Photo Extracted Sample Subjects 6. After creation of the Dynamic Photo image is complete , the finished image with the inserted moving su bjec t will appe ar on the monitor screen.
5 Creating a Dynamic Photo Image Creating a Dynamic Photo Image Dynamic Photo images are created by extr acting the subject out of one image, and inserting it into another image. The term “subject” as used here refers to what you extract or crop out of the first image.
6 Creating a Dynamic Photo Image 3. First, shoot the subject. Best results can be obtained with the camera secured on a tripod. With the camera pointed at the moving subject, press the shutter button to record. If you selected “Moving Subject”, the camera will record a series of Continuous Shutter (CS) images over a few seconds.
7 Creating a Dynamic Photo Image The camera compares the images you shot in steps 3 and 4 and extracts the subject. The extracted subject image will appear on the monitor screen. If you selected “Moving Subject”, the 20 subject images that were recorde d will scroll on the screen, creating the illusion of movement.
8 Creating a Dynamic Photo Image 4. Use [ 4 ] and [ 6 ] to select the subject you want to insert and then press [SET]. * Only subjects that can be inserted into other images will appear at this ti me. 5. Use the zoom controller to adj ust the size of the subject an d use [ 8 ], [ 2 ], [ 4 ], and [ 6 ] to adjust its position.
9 Creating a Dynamic Photo Image Four Tips for Good Subject Cropping • When shooting the subject image , shoot against a white wall or some other surface whose color is different from that of the subject. The camera will not be able to crop the subject image proper ly if its color is the same as or similar to the background color.
10 Creating a Dynamic Photo Image Move the subjec t away from the wall to avoid shadows ! The camera may mistake shadows on the wall or floor caused by strong sunlight, illumi nation , or other light sources as part of the subject. Shadows tend to form when the subject is too close to a wall.
11 Creating a Dynamic Photo Image Pressing [SET] during step 1 of “3. F irst, shoot the subject.” will display a screen for specifying the sub ject type and CS speed. You can select from among the four subject typ es listed below. You also can specify a stationary subject (one frame only) in addition to a moving subject.
12 Creating a Dynamic Photo Image You can use the Dynamic Photo image you created in Step 2 in a variety of fun ways. Step 3: Have fun with Dynamic Phot o. On the cam era On a TV Dynamic Photo images play back automatically as soon as you display them on the EXILIM monitor screen.
13 Creating a Dynamic Photo Image On a PC Enjoy watching Dynamic Photo images on your PC screen. In a digital phot o frame Play Dynamic Photo images in a digital photo frame.
Ein wichtiger Punkt beim Kauf des Geräts Casio EX Z 280 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Casio EX Z 280 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Casio EX Z 280 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Casio EX Z 280 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Casio EX Z 280 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Casio EX Z 280 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Casio EX Z 280 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Casio EX Z 280. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Casio EX Z 280 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
