Benutzeranleitung / Produktwartung DVD-S659 des Produzenten Yamaha
Zur Seite of 47
0 U HDMI DVD PLAYER LECTEUR DE DVD DVD-S659 00EN_DVD-S659_U.book Page 0 Monday, May 22, 2006 12:29 PM.
i IMPORTANT SAFETY INSTRUCTIONS • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ii We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association ’ s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
iii CAUTION: READ THIS BEFORE OPERATING THIS UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this unit in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, or cold.
1 En English Contents Introduction Region codes ...............................................................3 Supplied accessories ..................................................3 Notes about discs/content format .........................3 Cleaning discs .
2 En Contents Setup Menu General setup menu ............................................... 22 Locking/Unlocking the disc for viewing ................. 22 Dimming the front panel display............................... 22 Programming disc tracks (except MP3/WMA/ JPEG/DivX).
3 En English Introduction Thank you for purchasing this unit. This Owner’s Manual explains the basic operation of this unit. DVD discs must be labeled ALL regions or Region 1 in order to play on this unit. You cannot play discs labeled for other regions.
4 En Introduction • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records.
5 En English Functional Overview 1 STANDBY/ON Turns on this unit or sets it to the standby mode. 2 Disc tray Loads a disc in the disc tray. 3 OPEN/CLOSE ( / ) Opens or closes the disc tray. 4 HDMI indicator Lights up when an HDMI component is connected, and signals output via the HDMI jack of this unit.
6 En Functional Overview 1 Turns on this unit or sets it to the standby mode. 2 TOP MENU/RETURN Displays the top-level disc (DVD). Moves back to the previous menu (DVD*/ VCD). 3 MENU Accesses the menu of a disc (DVD). Switches PBC on or off (VCD). 4 1 / 2 / 3 / 4 Selects an item in the currently displayed menu.
7 En English Connections Be sure to turn off this unit and unplug the power supply cable, before you make or change connections. • Depending on the equipment you wish to connect, there are various ways to make connections. Possible connections are described below.
8 En Connections If your AV receiver has video output jacks, connect your receiver and then your TV so that you can use one TV for several different video sources (LD, VCR, etc.) by simply switching the input source selector of your receiver. This unit has four types of video output jacks.
9 En English Connections HDMI jack Connect the HDMI output jack of this unit to an HDMI input jack of your TV using a commercially available HDMI cable.
10 En Getting Started 1 Open the battery compartment. 2 Insert the two supplied batteries (AA, R06, UM-3) following the indications ( + /–) inside the compartment. 3 Close the cover. Notes: – Insert batteries correctly according to the polarity markings ( + /–) .
11 En English Getting Started 1 Connect the AC power cord to the power outlet. 2 Turn on your TV and AV receiver. 3 Select the appropriate input source of the AV receiver connected to this unit. Refer to the manual supplied with your AV receiver for details.
12 En Getting Started Setting an aspect ratio for your TV You can set the aspect ratio of this unit to match your TV. If the aspect ratio of your TV is 4:3, you do not need to change this setting. If you have a widescreen TV, change this setting according to the following procedure.
13 En English Getting Started Setting the audio, subtitle and disc menu languages (DVD-Video only) 1 Press STOP ( 9 ) twice, and then press SETUP . 2 Press 2 repeatedly to select “PREFERENCE PAGE”. 3 Press 3 / 4 to highlight one of the options below at a time, and then press 2 .
14 En Disc Operation IMPORTANT! – If the inhibition icon ( ) appears on the TV screen when a button is pressed, the function for that button is not available on the current disc or at the current time. – Depending on the DVD or VIDEO CD disc, some operations may operate differently or be restricted.
15 En English Disc Operation Repeat and shuffle • Each time you press REPEAT during playback, the front panel display changes as follows: DVD ➔ RPT ONE (repeat chapter) ➔ RPT TT (repeat title) .
16 En Disc Operation Zooming in This function allows you to enlarge or lessen the picture on the TV screen and to pan through the enlarged picture. 1 During playback, press ZOOM repeatedly to display the picture at different scales. • Use 1 / 2 / 3 / 4 to pan through the enlarged picture.
17 En English Disc Operation Title/Chapter/Track selection (DVD/VCD) 1 Press 3 / 4 to select [TITLE] or [CHAPTER] (DVD) or [TRACK] (VCD). 2 Press ENTER/OK to confirm the selection. 3 Select a title, chapter or track number using the numeric buttons (0-9) .
18 En Disc Operation Audio Changing the audio language and/or format • Press AUDIO repeatedly to select an audio language. Subtitles • Press SUBTITLE repeatedly to select a subtitle language. Playback control (PBC) For VCD with playback control (PBC) feature (version 2.
19 En English Disc Operation 3 Press ENTER/OK . ➜ Thumbnail pictures appear on the TV screen. 4 Use 1 / 2 / 3 / 4 to select a track or use the numeric buttons (0-9) to input the selected track number. 5 Press S / T to open the previous or next page.
20 En Disc Operation Selecting a folder and track/file 1 Press 3 / 4 to select a folder, and then press ENTER/OK to open the folder. 2 Press 3 / 4 to select a track/file. 3 Press ENTER/OK to confirm your selection. ➜ Playback starts from the selected file to the end of the folder.
21 En English Disc Operation Playback with multi-angles • During playback, press 1 / 2 / 3 / 4 to rotate the picture on the TV screen. 1 : rotates the picture counter-clockwise 2 : rotates the picture clockwise 3 : flips the picture vertically 4 : flips the picture horizontally Scan effect • Press ANGLE repeatedly to choose a scan effect.
22 En Setup Menu Setup is carried out on the TV screen, enabling you to customize this unit to suit your own particular requirements. 1 Press SETUP 2 Press 1 / 2 to select “GENERAL SETUP PAGE”. 3 Press ENTER/OK to confirm your selection. Locking/Unlocking the disc for viewing Not all discs are rated or coded by the manufacturer of the disc.
23 En English Setup Menu To input your favorite tracks/chapters 3 Use the numeric buttons (0-9) to enter a valid track/chapter number. 4 Use 1 / 2 / 3 / 4 to move the cursor to the next position. • If the track/chapter number is more than ten, press T to move to the next page, and then proceed with programming.
24 En Setup Menu Auto standby This function is used to turn the auto standby mode on or off when disc playback is stopped for more than 30 minutes. 1 In “GENERAL SETUP PAGE”, press 3 / 4 to highlight [AUTO STANDBY], and then press 2 .
25 En English Setup Menu VIRTUAL SURR Select this to virtually reproduce the surround channels. 2 Press 3 / 4 to select a setting, and then press ENTER/OK to confirm your selection. Setting the digital output The [DIGITAL AUDIO] options are: “DIGITAL OUTPUT” and “LPCM OUTPUT”.
26 En Setup Menu Setting the HDMI audio When you connect this unit to an HDMI compatible component via the HDMI jack, select to turn on or off the HDMI audio output. 1 In ‘AUDIO SETUP PAGE’, press 34 to highlight [HDMI AUDIO], then press 2 . ON Select this to turn on the HDMI audio output.
27 En English Setup Menu ON Select this to level out the volume. This feature is only available for movies with the Dolby Digital mode. OFF Select this when you want to enjoy the full dynamic range of surround sound. 2 Press 3 / 4 to select a setting, and then press ENTER/OK to confirm your selection.
28 En Setup Menu 3 Select an item, and then press ENTER/OK to confirm your selection. The relationship between the setting of this unit and the TV display When the aspect ratio of your TV is 4:3: When the aspect ratio of your TV is 16:9 (widescreen): *1: If the disc is not assigned to playback with panscan, it is played with letterbox.
29 En English Setup Menu Picture setting This unit comes with three predefined sets of picture color settings and one personal setting that you can define yourself. 1 In “VIDEO SETUP PAGE”, press 3 / 4 to highlight [PICTURE SETTING], and then press 2 .
30 En Setup Menu Selecting the black level If you set the TV type to NTSC, set the black level shift to ON to improve the color contrast during playback. The black level setting has no effect if the TV type is set to PAL. 1 In “VIDEO SETUP PAGE”, press 3 / 4 to highlight [BLACK LEVEL], and then press 2 .
31 En English Setup Menu HDMI VIDEO Enables you to adjust the resolution depending on the monitor you are using. Note: – For settings other than [AUTO], HDMI video output may not be display properly if a resolution output setting is not supported by the HDMI-compatible monitor you are using.
32 En Setup Menu Audio, subtitle and disc menu These menus contain various language options for the audio, subtitles and disc menus recorded on the DVD-Video. For details, see “Setting the audio, subtitle and disc menu languages (DVD-Video only)” on page 13.
33 En English Setup Menu To play back a disc in VR format 3 Press SETUP to close the setup menu. 4 Press PLAY ( B ) to begin to play back the setting you selected. Previewing VR format 5 During playback, press SCAN . ➜ A list appears on the TV screen.
34 En Setup Menu MP3/JPEG menu MP3/JPEG Navigator can be set only if the disc was recorded with a menu. It allows you to select different display menus for easy navigation. 1 In “PREFERENCE PAGE”, press 3 / 4 to highlight [MP3/JPEG NAV], and then press 2 .
35 En English Setup Menu Changing the password The same password is used for both parental control and disc lock. Enter your six-digit password when prompted on the screen. The default password is 000 000. 1 In “PREFERENCE PAGE”, press 3 / 4 to highlight [PASSWORD], and then press 2 to select [CHANGE].
36 En Language Codes These codes can be used to select other languages. This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”.
37 En English Language Codes These codes can be used to select other languages. This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”.
38 En Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center.
39 En English Troubleshooting No audio at digital output – Check the digital connections. – If you are playing a DTS source, check that your receiver can decode DTS and “DIGITAL OUTPUT” is set to “ALL” (see page 25). – If you are playing an MPEG-2 source, check that your receiver can decode MPEG-2.
40 En Glossary Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through tw o channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displa yed image.
41 En English Glossary HDCP: HDCP (High-bandwidth Digital Content Protection) de veloped b y Intel corporation, is a method to encrypt digital video and audio data for purpose of content pr otection. For further information on HDCP , visit the HDCP website at “www .
42 En Specifications PLAYBACK SYSTEM DVD Video Video CD & SVCD CD PICTURE CD CD-R, CD-RW DVD+R, DVD+RW, DVD+R DL DVD-R, DVD-RW, DVD-R DL VIDEO PERFORMANCE Video (CVBS) Output 1 Vpp into 75 ohm S-Video output Y: 1 Vpp into 75 ohm C: 0.3 Vpp into 75 ohm Component video output Y: 1 Vpp into 75 ohm P B P R : 0.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.
Ein wichtiger Punkt beim Kauf des Geräts Yamaha DVD-S659 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Yamaha DVD-S659 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Yamaha DVD-S659 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Yamaha DVD-S659 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Yamaha DVD-S659 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Yamaha DVD-S659 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Yamaha DVD-S659 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Yamaha DVD-S659. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Yamaha DVD-S659 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
