Benutzeranleitung / Produktwartung RF36OBXv des Produzenten Whirlpool
Zur Seite of 28
Is. Clothes Orpm. Freezen. Relrigeralor.Freezer, Ice Makers DIshwashers Buill-In Ovens and Surlace Umts. Ranges, Microwave Ovens. Trash Compact.
Contents BEFORE YOU USE YOUR RANGE. . . . . . . . . IMPORTANT SAFETY INSTRUCTIONS . . . . . . . PARTS AND FEATURES . . USING YOUR RANGE.. . . . . Using the Surface Units Optional Canning Kit Setting the Clock . . . . Using the Minute Timer . Using the Oven Controls Baking .
IMPORTANT SAFETY INSTRUCTIONS l Read all instructions before using the range. l Install or locate the range only In accordance with the provided Installation Instructions. It is rec- ommended that the range be installed by a qualified installer. The range must be properly connected and grounded to electrical supply.
will be damaged and shock or l Do not store things children fire could result. might want above the range. l Use care when opening oven Children could be burned or door. Let hot air or steam escape injured while climbing on it. before removing or replacing l Do not touch surface units, areas food.
Parts and features Model RF36OBXv.
Using your range Using the Surface Units Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF. Surface Unit Markers The solid dot in the surface unit marker shows which surface unit is turned on by that knob.
Use only flat-bottomed utensils for best cooking results and to prevent damage to the cooktop. Specialty items with rounded or ridged bottoms (woks, ridged bottom canners or tea kettles) are not recommended. Burn Hazard l If the pan Is too small for the surface unit, you could be burned by the heat from the exposed section of the surface unit.
Setting the Clock Push in and turn the Minute Timer Knob to set the Clock. 1. Push in Minute Timer Knob and turn clockwise until clock shows the right time of day. 2. let the Minute Timer Knob pop out. Turn clockwise until Minute Timer hand points to OFF.
Using the Oven Controls Baking 1. Position the rack properly before turning on the oven. To change rack position, lift rack at front and pull out. I . I 2. Set the Oven Selector on BAKE. The Oven ON Indicator Light will come on. 4. Put food in the oven.
Adjusting the Oven Temperature Control Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without your noticing the change. Your new oven is properly adjusted to provide accurate temperatures.
Broiling 1. Position the rack before turning the oven on. See “Broil Chart” in the Cooking Guide or a reliable cookbook for recommended rack positions. 3. Close the door to the Broil Stop position (open about 4 inches, 10.2 cm). The door will stay open by itself.
Using The Automatic MEALTIMER’” Clock The automatic MEALTIMER’” Clock is designed to turn the oven on and off at times you set, even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven, such as meats and casseroles.
To start baking now and stop automatically: 1. Position rack properly and place the food in the oven. 2. Make sure the clock is set to the right time of day. 3. Push in and turn the Stop Time Knob clockwise to the time you want the oven to shut off. 4.
The Storage Drawer The storage drawer is for storing pots and pans. Use care when handling the drawer. Removing the storage drawer 1. Pull drawer straight out to the 2. Lift back slightly and $de drawer first stop. Lifl front and pull out to all the way out the second stop.
Optional Rotisserie If you would like a rotisserie for your oven, you can order a kit (Part No. RCK-81/242985) from your Whirlpool Dealer. The kit includes easy installation instructions. Optional Door Panel Pat If you would like to change the color of your oven door glass to white or almond, you can order one of these kits: White (Kit No.
Surface Units and Reflector Bowls Removing Burn and Electrical Shock Hazard Make sure all surface units are OFF before removing surface units and reflector bowls. Failure to do so can result in burns or elec- trical shock. 1. Turn off all surface units.
Replacing Burn and Electrical Shock Hazard Make sure all surface units are OFF before ; replacmg surface unrts and reflector bowls. Failure to do so can result in burns or elec- 1. Turn off all surface units. 3. Hold the surface unit as level as possible with the terminal just started into the receptacle.
Lift-Up Cooktop 1. Lift front of cooktop at both front corners until the support rods lock into place. Personal Injury Hazard Be sure both support rods are fully extended and in the locked posltion. Failure to do so could result in personal injury from the cooktop accidentally falling.
Using the Self-Cleaning Cycle The Self-Cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely. Before You Start 1. Clean the areas shown by hand. DO NOT clean, move or bend the They do not get hot enough fiberglass seal.
Setting the Contmls Be sure the kitchen is venttlated durlng the Self-Cleaning cycle. Thls will help normal smoke and heat odors to dlsappear from the room as quickly as possible. 1. Set the Oven Selector and Oven Temperature Control on CLEAN. The Oven ON Indicator Light will come on.
Special Tips l Keep the kitchen well ventilated during the Self-Cleaning cycle to help get rid of normal heat, odors and smoke. l Clean the oven before it gets heavily soiled. Cleaning a very soiled oven takes longer and results in more smoke than usual.
Cleaning Chart PART Exterior surfaces WHAT TO USE Warm soapy water and a soft cloth. Plastic scrubbing pad for stubborn spots. HOW TO CLEAN . Wipe off regularly when range is cool. . Do not allow food containing acids (such as vinegar, tomato, lemon juice or milk) to remain on surface.
The Oven Light The oven light will come on when you open the oven door. To Replace : Electrical Shock and Personal Injury Hazard l Make sure oven and light bulb are cool and power to the oven has been turned OFF before replacing the light bulb. Failure to do so could result in electrical shock or burns.
If you need service or assistance, we suggest you follow these five steps: 1. Before calling for assistance... Performance problems often result from little things you can find and fix without tools of any kind. If nothing operates: l Is the power supply cord plugged into a live circuit with the proper volt- age? (See Installation Instructions.
3. If you need setice*... Whirlpool has a nationwide network of fran- chised TECH- CARE@ Service Companies. TECH-CARE serv- ice technicians are trained to fulfill the product war- ranty and provide after-warranty service,anywhere in the United States.
Notes 26.
Notes 27.
WHIRLPOOL’, RANGE PRODUCT WARRANTY EROOl LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR 1 FULL ONE-YEAR WARRANTY FSP% replacement parts and repair labor to From Date of Purchase correct defects in materials or workmanship. Service must be provided by a franchised TECH-CARE” service company.
Ein wichtiger Punkt beim Kauf des Geräts Whirlpool RF36OBXv (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Whirlpool RF36OBXv noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Whirlpool RF36OBXv - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Whirlpool RF36OBXv reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Whirlpool RF36OBXv erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Whirlpool RF36OBXv besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Whirlpool RF36OBXv verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Whirlpool RF36OBXv. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Whirlpool RF36OBXv gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
