Benutzeranleitung / Produktwartung Electric Fryer des Produzenten Frymaster
Zur Seite of 25
Dean, a member of the Commercial Food Equipment Service Association, recommends using CFESA Certified Technicians. Price: $6.00 24-Hour Service Hotline 1-800-551-8633 819-5709 04-99 Super Runner 38 Se.
PLEASE READ ALL SECTIONS OF THIS MANUAL AND RETAIN FOR FUTURE REFERENCE. THIS PRODUCT HAS BEEN CERTIFIED AS COMMERCIAL COOKING EQUIPMENT AND MUST BE INSTALLED BY PROFESSIONAL PERSONNEL AS SPECIFIED. WE SUGGEST INSTALLATION, MAINTENANCE AND REPAIRS SHOULD BE PERFORMED BY YOUR LOCAL DEAN FACTORY AUTHORIZED SERVICE AGENCY.
2 DEAN SUPER RUNNER 38 ELECTRIC FRYER INSTALLATION, OPERATION, SERVICE & PARTS MANUAL TABLE OF CONTENTS PAGE 1 PARTS ORDERING/SERVICE INFORMATION 2 2 IMPORTANT INFORMATION 3 3 INSTALLATION 5 4 DAILY OPERATION 9 5 CLEANING AND MAINTENANCE 11 6 TROUBLESHOOTING 13 7 WIRING DIAGRAM 14 8 PARTS LIST 15 9 PORTABLE FILTER OPERATIONS 17 1.
3 2. IMPORTANT INFORMATION 2.1 DESCRIPTION: The Dean Super Runner Series 38 electric fryers are energy-efficient, electrically heated units, certified by NSF and the Underwriters Laboratory and manufactured to their basic performance and application specifications.
4 c. STANDARDS : All electrical cooking appliances must be electrically connected and grounded in accordance with local codes, or in the absence of local codes, with the latest editions of the European Community (CE) standards. 2.4 AIR SUPPLY & VENTILATION: a.
5 3. INSTALLATION 3.1 POSITIONING: a. Initial Installation : If installed with legs, do not push against any unit edges to adjust its position. Use a pallet or lift jack to lift it slightly and place it where it is to be installed. b. Relocating The Fryer : If relocating a fryer installed with legs, remove all weight from each leg before moving.
6 Leg and Rigid Caster Installations Figure 3-1 3.3 LEVELING: a. Place a carpenter ’ s spirit level across the top of the fryer and level the unit both front-to-back and side-to-side. If the fryer is not level, the unit may not function efficiently, the oil may not drain properly for filtering and in a line-up it may not match adjacent units.
7 turning the hex bullet foot to the required height. c. Rigid Casters (Only ): 1. Install the optional rigid casters on the fryer rear channel only. 2. Do not use more than two metal shims per caster. 3. There are no thread adjustments for the rigid casters.
8 3.5 INITIAL START-UP: a. CLEANING : New units are wiped clean with solvents at the factory to remove any visible signs of dirt, oil, grease, etc. remaining from the manufacturing process, then coated lightly with oil.
9 4. DAILY OPERATION 4.1 OPENING: At opening time, always visually check that the power switch and the thermostat are “OFF”. 4.2 GENERAL USE: a. For consistent quality product, convenience and long-term savings, use a high-quality liquid frying compound.
10 CAUTION WHEN FILTERING, NEVER LEAVE THE FILTER UNATTENDED. ALWAYS POINT THE FLEXIBLE OIL RETURN HOSE NOZZLE DOWN INTO THE FRY VESSEL TO PREVENT THE SPRAYING OF HOT OIL WHICH MAY CAUSE SEVERE BURNS. c. When the fryer is not in use, the thermostat should be set lower than that used during cooking.
11 5. CLEANING & MAINTENANCE 5.1 GENERAL : Any piece of equipment works better and lasts longer when maintained properly and kept clean. Cooking equipment is no exception. The fryer must be kept clean during the working day and thoroughly cleaned at the end of each day.
12 5.5 PERIODIC: The fryer should be checked and adjusted periodically by qualified service personnel as part of a regular kitchen maintenance program. 5.6 STAINLESS STEEL : All stainless steel fryer body parts should be wiped regularly with hot, soapy water during the day and with a liquid cleaner designed for this material at the end of each day.
13 6. TROUBLESHOOTING GUIDE These troubleshooting procedures must be carried out only be a Factory Authorized Service Center or a local service company specializing in hotel and restaurant cooking appliances. The problems and possible solutions given below cover those most commonly encountered.
14 7. WIRING DIAGRAM 230/400V = 13.1 KW Total 220V Elements 4KW P/N 14-0592-8 K2 = Heat Contactor P/N 810-1202 K1 = Latch Contactor P/N 810-1202 Fuse 5 Amp P/N 1549 BLK#2 WHT#2 PURP RED Oper Thermosta.
15 8. SUPER RUNNER 38 ELECTRIC (CE) PARTS LIST ITEM PART NUMBER DESCRIPTION 1 2698 LEG, BLACK, ADJUSTABLE WITH MOUNTING PLATE, 6" 2 2686 CASTER RIGID 3 44-1363 NIPPLE, DRAIN EXT.
16 ITEM PART NUMBER DESCRIPTION 9 12-0379 LOWER HINGE BRACKET 10 12-0373 FRT & REAR CHANNEL SR38 (NEW STYLE) 11 8101202 40 AMP 3 POLE CONTACTOR (CE Only) 12 12-0311 CNTRL PANEL BACK SR38 12-0380-1.
17 9. PORTABLE FILTER OPERATIONS 9.1 GENERAL: a. These instructions are not intended to replace the operating instructions that came with your Dean Filter System. They are intended to provide general information about filtration procedures and serve as a quick reference guide.
18 filter cover on top of filter pan and slide the filter back inside the fryer. j. Reconnect oil return quick disconnect lines (if installed on the fryer). 9.3 FILTER OPERATION: Dean MF-90 Portable Filter Systems are designed to return the filtered oil by means of a flexible oil return hose which connects to the filter ’ s quick disconnect.
19 9.4 CHANGING FILTER PAPER: The top piece of filter paper should be discarded when it becomes dark or scuffed in appearance. Follow these procedures: a. Before changing the paper, use the flexible hose (with about one inch of oil remaining in the filter pan) to flush debris from the filter pan sides onto the paper.
20 9.5.1 Portable Filter Pump Fails to Pump Oil? Does your filter have a heater? Turn heater "ON" and run heater for 15 minutes. Does oil flow? Conduct normal filter operations. Can you blow air through Insert flexible oil return hose into the filter pan holster.
21 9.5.2 Rate of Oil Return Slowing? Rate of oil return to the fryer is slowing. Is this the first fryer to be filtered during this filtering session? Check the filter paper in the filter pan. Is the filter paper properly secured by the hold down ring? Paper may be plugged by improper use of filter powder.
22 9.5.3 Blockage between Filter Pan and Flex Hose Valve? Blockage has been determined to be between the filter pan bottom and the flex hose valve. Does your filter have a heater? Disconnect oil line from the filter pan to the pump at the pump end. Put finger over the inlet connection to the pump.
23 ENTER FROM PAGE 22 HERE Plug is in the bottom of the filter pan or in the line from the filter to the pump. Disconnect the tubing from the filter pan to the motor. Make sure the pipe is cool. Try blowing air through it. Can you blow air through it? This line is clogged.
Dean , 8700 Line Avenue, Shreveport, Louisiana 71135 TEL 1-318-865-1711 FAX (Parts) 1-318-219-7140 (Tech Support) 1-318-219-7135 Price: $6.00 PRINTED IN THE UNITED STATES SERVICE HOTLINE 1-800-551-863.
Ein wichtiger Punkt beim Kauf des Geräts Frymaster Electric Fryer (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Frymaster Electric Fryer noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Frymaster Electric Fryer - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Frymaster Electric Fryer reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Frymaster Electric Fryer erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Frymaster Electric Fryer besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Frymaster Electric Fryer verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Frymaster Electric Fryer. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Frymaster Electric Fryer gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
