Benutzeranleitung / Produktwartung X-12 des Produzenten Fostex
Zur Seite of 20
Multitracker Owner's manual Thank you for purchasing our Fostex Model X-12. The X-12 is an easy-to-use cassette tape four-track 4 channel multi- tracker with that great Fostex sound. Because the X-12 features simple and easily handled functions, anyone operating a multitracker for the first time can create a great recording.
2 Model X-12 Owner's Manual CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 Model X-12 Owner's Manual Precautions (please read before use) T able of Contents * Do not let water or other liquids, flammable materials, or metal objects such as pins get inside the X-12. These things may cause electrical shock or short circuit the X-12, and damage it.
4 Model X-12 Owner's Manual <Fig. 1> Boom box / Cassette deck <Handling cassette tapes> Cassette tape suitable for recording: The X-12 is designed to perform best with high-position cassette tape (TYPE II, HIGH). We recommended these or their equivalent.
5 Model X-12 Owner's Manual 2. Do not directly apply an output signal from the [LINE OUT] jack to the [INPUT] jack. As shown in schematic below, if the [LINE OUT] jack is directly connected to the [INPUT] jack and the [LINE OUT/PHONES] knob is raised, it will cause oscillation.
6 Model X-12 Owner's Manual This section explains the names and functions of the X-12, such as switches, controls, and I/ O jacks. Read this section so that you will understand the functions of the switches and controls.
7 Model X-12 Owner's Manual 1. AC adaptor connector [DC IN] Connect the AC adaptor included in the package. <CAUTION> When the AC adaptor is plugged into an AC outlet, a very small current flows in the unit even if you turn off (STANDBY) the power switch.
8 Model X-12 Owner's Manual The X-12 uses the following connection plugs: Stereo phone plug (stereo type) Use this plug to connect to the [PHONES] jack. < Gain control rule of thumb > The gain is adjusted by rotating the [LINE-MIC] knob while watching the lighting condition of the level meter LED as the signal is input.
9 Model X-12 Owner's Manual Connect the AC adaptor jack to the X-12's [DC IN] connector, and connect the power plug to the AC outlet. Basic Operation (recording) As explained above, there are four recordable tracks. The X-12, records each track independently.
10 Model X-12 Owner's Manual When the leader part is forwarded, press the [RESET] button to set the counter to "000." Select the track to be recorded with the [REC TRACK] selector. Select track 1 (the indicator will change to red) or whatever track you prefer to record on.
11 Model X-12 Owner's Manual Basic Operation (playback) You can play back the recorded Track 1. Press the [REW] button to rewind the tape to the beginning of the tape (counter "000"). Press the [PLAY] button to start playing back the tape from the "000" position.
12 Model X-12 Owner's Manual V ocal T rack 4 T rack 3 T rack 2 T rack 1 Drum Machine E. Bass K eyboard K eyboard T rack 4 T rack 3 T rack 2 T rack 1 Drum Machine E.
13 Model X-12 Owner's Manual Before you start overdubbing, practice your electric bass performance while monitoring the drum machine recording in Track 1 through the headphones. After you finish recording, press the [STOP] button or the [PAUSE] button to stop the tape.
14 Model X-12 Owner's Manual The following table indicates the switch and knob settings used for overdubbing to Tracks 3 and 4. Refer to this table and to the steps described on the previous page to overdub the keyboard to Track 3 and vocal to Track 4.
15 Model X-12 Owner's Manual 2. Mixdown Mixdown is a technique that enables you to adjust the volume balance of the overdubbed tracks 1-4, combine them to two channels, and dub (copy) to a master recorder (cassette deck or MD recorder etc.
16 Model X-12 Owner's Manual <Note> You can position the sound on tracks 1-4 anywhere in stereo image on mixdown. This is where your creatively is important.
17 Model X-12 Owner's Manual Troubleshooting Check Point Corrective Action The power is not turned on when you press the power switch on. Check the connection at the AC outlet and the [DC IN] jack of the X-12. Is the head dirty? Clean the head. Are you using a type of tape other than high position? Use a high-position tape.
18 Model X-12 Owner's Manual INPUT Connector (x1) : ø6mm PHONE jack Input Impedance : 20k Ω or higher Reference Input Level : -50dBV ~ -10dBV (adjustable with the GAIN knob) LINE OUT (L, R) Co.
19 Model X-12 Owner's Manual Accessories (option) Specifications Type: Semi-Open/Dynamic type Freq. Response: 20~20,000Hz Output Impedance: 44 Ω Sensitivity: 96dB (dB/mW) Rated Input: 30mW Maximum Input: 100mW Sound Pressure Level: 116dB Weight: Approx.
<AUSTRIA> NAME: ATEC Audio-u. Videogeraete VertriebsgesmbH. ADD: Im Winkel 5, A-2325 Velm, Austria TEL: (+43) 2234-74004, FAX: (+43) 2234-74074 <BELGIUM> NAME: Sound Industries NV ADD: Bij.
Ein wichtiger Punkt beim Kauf des Geräts Fostex X-12 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fostex X-12 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fostex X-12 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fostex X-12 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fostex X-12 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fostex X-12 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fostex X-12 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fostex X-12. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fostex X-12 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
